These separate arrays were used by the old demuxers and are not needed
anymore. We can simplify track switching as well.
One interesting thing is that stream/tv.c (which is a demuxer) won't
respect --no-audio anymore. It will probably work as expected, but it
will still open an audio device etc. - this is because track selection
is now always done with the runtime track switching mechanism. Maybe
the TV code could be updated to do proper runtime switching, but I
can't test this stuff.
The audio parser was needed only by the "old" demuxers, and
demux_rawaudio. All other demuxers output already parsed packets.
demux_rawaudio is usually for raw audio, so using a parser with it
doesn't usually make sense. But you can also force it to read
compressed formats with fixed packet sizes, in which case the parser
would have been used. This use case is probably broken now, but you
will be able to do the same thing with libavformat demuxers.
Delete demux_avi, demux_asf, demux_mpg, demux_ts. libavformat does
better than them (except in rare corner cases), and the demuxers have
a bad influence on the rest of the code. Often they don't output
proper packets, and require additional audio and video parsing. Most
work only in --no-correct-pts mode.
Remove them to facilitate further cleanups.
STREAM_CTRL_GET_METADATA will be used to poll for streamcast metadata.
Also add DEMUXER_CTRL_UPDATE_INFO, which could in theory be used by
demux_lavf.c. (Unfortunately, libavformat is too crappy to read metadata
mid-stream for mp3 or ogg, so we don't implement it.)
The filter chain and the video ouputs have config() functions. They are
strictly limited to transfering the video size and format. Other
parameters (like color levels) have to be transferred separately.
Improve upon this by introducing a separate set of reconfig() functions,
which use mp_image_params to carry format parameters. This struct
contains all image format related parameters from config(), plus
additional parameters such as colorspace.
Change vf_rotate to use it, as well as vo_opengl. vf_rotate is just
an example/test case, but vo_opengl will need it later.
The intention is also to get rid of VOCTRL_SET_YUV_COLORSPACE. This
information is now handed to the VOs via reconfig(). The getter,
VOCTRL_GET_YUV_COLORSPACE, will still be needed though.
Old code used to use libass' recoding feature, which is a copy of the
old MPlayer code. We dropped that a few commits ago. Unfortunately,
this made it impossible to load some subtitle files, like UTF-16 files.
Make .ass loading respect -subcp again. We do this by recoding the
probe buffer to UTF-8, and then trying to load it normally. (Yep.)
Since UTF-16 in particular will effectively half the probe buffer size,
double the probe size.
demux_libass.c allows us to make subtitle format detection part of the
normal file loading process. libass has no probe function, but trying to
load the start of a file (the first 4 KB) is good enough. Hope that
libass can even handle random binary input gracefully without printing
stupid log messages, and that the libass parser doesn't accept too many
non-ASS files as input.
This doesn't handle the -subcp option correctly yet. This will be fixed
later.
The default correct-pts mode depended on which demuxer was opened last.
Often this is the subtitle demuxer. The correct-pts mode should be
decided on the demuxer for video instead.
subreader.c (before this commit renamed to demux_subreader.c) was
special cased to the -sub option. The plan is using the normal demuxer
codepath for all subtitle formats (so we can prefer libavformat demuxers
for most formats).
There are some subtle changes. The probe size is restricted to 32 KB
(instead of unlimitted + giving up after 100 lines of input). For
formats like MicroDVD, the video FPS isn't used anymore, because it's
not available on the subtitle demuxer level. Instead, hardcode it to
23.976 FPS (libavformat seems to do the same). The user can probably
still use -sub-fps to fix the timing. Checking the file extension for
".utf"/".utf8"/".utf-8" is simply removed (seems worthless, was in the
way, and I've never seen this anywhere).
Simpler, reduces the amount of copying.
We still have to malloc+memcpy the probe buffer though, because padding
with FF_INPUT_BUFFER_PADDING_SIZE is required by libavformat.
If a subtitle is external, read it completely and add all subtitle
events in advance when the subtitle track is selected. This is done
for text subtitles only. (Note that subreader.c and subtitles loaded
with libass are different and don't have anything to do with this
commit.)
Seems like a completely unnecessary complication. Instead, always add a
1 byte padding (could be extended if a caller needs it), and clear it.
Also add some documentation. There was some, but it was outdated and
incomplete.
The stream EOF flag should only be set when trying to read past the end
of the file (relatively similar to unix files). Always clear the EOF
flag on seeking. Trying to set it "properly" (depending whether data is
available at seek destination or not) might be an ok idea, but would
require attention to too many special cases. I suspect before this
commit (and in MPlayer etc. too), the EOF flag wasn't handled
consistently when the stream position was at the end of the file.
Fix one special case in ebml.c and stream_skip(): this function couldn't
distinguish between at-EOF and past-EOF either.
This function was called in various places. Most time, it was used
before a seek. In other cases, the purpose was apparently resetting
the EOF flag. As far as I can see, this makes no sense anymore. At
least the stream_reset() calls paired with stream_seek() are completely
pointless. A seek will either seek inside the buffer (and reset the
EOF flag), or do an actual seek and reset all state.
This branch heavily refactors the subtitle code (both loading and
rendering), and adds support for a few new formats through FFmpeg.
We don't remove any of the old code yet. There are still some subtleties
related to subreader.c to be resolved: code page detection & conversion,
timing post-processing, UTF-16 subtitle support, support for the -subfps
option. Also, SRT reading and loading ASS via libass should be turned
into proper demuxers. (SRT is needed because Libav's is gravely broken,
and we want ASS loading via libass to cover full libass format support.
Both should be demuxers which are probed _before_ libavformat, so that
all subtitles can be loaded through the demuxer infrastructure, and
libavformat subtitles don't need to be treated in a special way.)
Before this, subtitle packets were returned as data ptr/len pairs, and
mplayer.c got the rest (pts and duration) directly from the demuxer
data structures. Then mplayer.c reassembled the packet data structure
again.
Pass packets directly instead. The mplayer.c side stays a bit awkward,
because the (now by default unused) DVD path keeps getting in the way.
In demux.c there's lots of weird stuff (3 functions that read packets,
really?), but we want to keep the code equivalent for now to avoid
hitting weird issues and corner cases.
Makes WebVTT actually work.
Also simplify the logic for setting duration. Only the subtitle path
uses the packet duration, so the checks for STREAM_SUB as well as the
keyframe flag are redundant.
Apparently duration and convergence_duration are the same thing, but
convergence_duration was added as Matroska-specific hack to get a higher
value range (int vs. int64_t) with high resolution Matroska timebases.
For us it doesn't matter, because double floats are used for timestamps
and durations.
This means subassconvert.c is split in sd_srt.c and sd_microdvd.c. Now
this code is involved in the sub conversion chain like sd_movtext is.
The invocation of the converter in sd_ass.c is removed.
This requires some other changes to make the new sub converter code work
with loading external subtitles. Until now, subtitles loaded via
subreader.c was assumed to be in plaintext, or for some formats, in ASS
(except in -no-ass mode). Then these were added to an ASS_Track. Change
this so that subtitles are always in their original format (as far as
decoders/converters for them are available), and turn every sub event
read by subreader.c as packet to the dec_sub.c subtitle chain.
This removes differences between external/demuxed and -ass/-no-ass code
paths further.
Internally, stream_dvd.c returned DEMUXER_TYPE_MPEG_PS, and the same
value was hardcoded to enforced usage of demux_lavf in demux.c. But
"-demuxer mpegps" basically did the same, so that switch was broken
for this format. Undo this and don't request a demuxer in stream_dvd.c.
demux_lavf.c is (probably) good enough to probe correctly with DVD.
Otherwise, we'd actually have to do something completely different to
force the libavformat demuxer.
Make the sub decoder stuff independent from sh_sub (except for
initialization of course). Sub decoders now access a struct sd only,
instead of getting access to sh_sub. The glue code in dec_sub.c is
similarily independent from osd.
Some simplifications are made. For example, the switch_id stuff is
unneeded: the frontend code just has to make sure to call osd_changed()
any time subtitles are switched.
This is also preparation for introducing subtitle converters. It's much
cleaner to completely separate demuxer header/renderer glue/decoders
for this purpose, especially since sub converters might completely
change how demuxer headers have to be interpreted.
Also pass data as demux_packets. Currently, this doesn't help much, but
libavcodec converters might need scary stuff like packet side data, so
it's perhaps better to go with passing packets.
Subtitle files are opened in mplayer.c, not using the demuxer
infrastructure in general. Pretend that this is not the case (outside of
the loading code) by opening a pseudo demuxer that does nothing. One
advantage is that the initialization code is now the same, and there's
no confusion about what the difference between track->stream,
track->sh_sub and mpctx->sh_sub is supposed to be.
This is a bit stupid, and it would be much better if there were proper
subtitle demuxers (there are many in recent FFmpeg, but not Libav). So
for now this is just a transition to a more proper architecture. Look
at demux_sub like an artifical limb: it's ugly, but don't hate it - it
helps you to get on with your life.
This unifies the subtitle rendering path. Now all subtitle rendering
goes through sd_ass.c/sd_lavc.c/sd_spu.c.
Before that commit, the spudec.h functions were used directly in
mplayer.c, which introduced many special cases. Add sd_spu.c, which is
just a small wrapper connecting the new subtitle render API with the
dusty old vobsub decoder in spudec.c.
One detail that changes is that we always pass the palette as extra
data, instead of passing the libdvdread palette as pointer to spudec
directly. This is a bit roundabout, but actually makes the code simpler
and more elegant: the difference between DVD and non-DVD dvdsubs is
reduced.
Ideally, we would just delete spudec.c and use libavcodec's DVD sub
decoder. However, DVD playback with demux_mpg produces packets
incompatible to lavc. There are incompatibilities the other way around
as well: packets from libavformat's vobsub demuxer are incompatible to
spudec.c. So we define a new subtitle codec name for demux_mpg subs,
"dvd_subtitle_mpg", which only sd_spu can decode.
There is actually code in spudec.c to "assemble" fragments into complete
packets, but using the whole spudec.c is easier than trying to move this
code into demux_mpg to fix subtitle packets.
As additional complication, Libav 9.x can't decode DVD subs correctly,
so use sd_spu in that case as well.
The new wavpack packet format (see previous commit) doesn't work with
older libavcodec versions, so disable the new code in this case.
The version numbers are only approximate, since the libavcodec version
wasn't bumped with the wavpack change, but it's close enough.
Libav introduced a silent API breakage by changing what wavpack packets
the libavcodec decoder accepts. Originally the libavcodec codec accepted
Matroska-style wavpack packets. Libav commit 9b6f47c removed this
capability from the libavcodec code, and added code to libavformat's
Matroska demuxer to "rearrange" wavpack packets. Since demux_mkv still
sent Matroska-style packets, playback failed.
Fix this by "rearranging" packets in demux_mkv as well by copying
libavformat's code. (The best kind of fix.)
Tested with [CCCP]_Mega_Lossless_Audio_Test.mkv, as well as with a
sample generated by mkvmerge.
The core deselected all streams on initialization, and then selected the
streams it actually wanted. This was no problem for
demux_mkv/demux_lavf, but old demuxers (like demux_asf) could lose some
packets. The problem is that these demuxers can buffer some data on
initialization, which then is flushed on track switching. Fix this by
explicitly avoiding deselecting a wanted stream.
When AAC is streamed over HTTP, using libavformat defaults is
pathetically slow. One solution for that is skipping probing and using
the mimetype to identify that it's AAC instead. This is what we did
before this commit (and ffmpeg does it too, but their logic is too
"inaccessible" for mpv).
This is still pretty fragile though. Make it a bit more robust by
requiring minimal probing. A probescore of 25 is reached after feeding
2 KB to libavformat (instead of > 500 KB for the normal probescore), so
use that. This is done only when streaming AAC from HTTP to reduce the
possibility of weird breakages for other formats.
Also reduce analyzeduration. The default analyzeduration will make
libavformat read lots of data, which makes playback start slow. So we
set analyzeduration to a low value. On the other hand, doing that for
other formats is risky, because there are unspecified effects with
certain "strange" formats (like transport streams). So we do this only
if we're streaming AAC from HTTP as well.
tl;dr libavformat is shit for media players
This can control whether demux_lavf should use the HTTP mime type to
determine the format, instead of probing the data with the libavformat
API. Do this to allow easier debugging in case the mimetype is
incorrect. (This is done only for AAC streams right now.)
Playing Youtube videos often requires an additional seek to the end of
the file. This flushes the stream cache. The reason for the seek is
reading the cues (seek index). This poses the question why Google is
muxing its files in such a way, since nothing in Matroska mandates that
cues are located at the end of the file, but we want to handle this
situation better anyway.
The seek index is not needed for normal playback, only for seeking.
This commit changes header parsing such that the index is not read on
initialization in order to avoid the additional stream-level seek.
Instead, read the index on the first demuxer-level seek, when the seek
index is actually needed.
If the cues are at the beginning of the file, they are read immediately
as part of the normal header reading process. This commit changes
behavior only if cues are outside of the header (i.e. not in the area
between EBML header and clusters), and linked by a SeekHead. Other
level 1 elements linked by the SeekHead might still cause seeks to the
end of the file, although that seems to be rare.
Before this commit, the demuxer would in theory accept multiple cues
elements (and append its contents to the index in the order as
encountered during reading). According to the Matroska specification,
there can be only one cues element in the segment, so this seems like
an overcomplication.
Change it so that redundant elements are ignored, like with all other
unique header elements. This makes implementing deferred reading of the
cues element easier.
The sequence of avcodec_alloc_context3() / avcodec_copy_context() /
avcodec_close() / av_free() leaks some memory. So don't copy the context
and use it directly.
Originally avcodec_copy_context() was used to guarantee that libavformat
can't update the fields of the context during demuxing in order to make
things a little more robust, but it's not strictly needed, and
ffmpeg/ffplay don't do this anyway. Still might make the situation worse
should we move demuxing into a separate thread, though.
