This was an annoying option type. And still is. But at least it's on the
same level as m_option_type_print_fn now, and can probably cleaned up
further like it. Both types are for options that are only on the command
line, always have special handling (i.e. do something with them in
parse_commandline.c before passing them to the generic
m_config.c/m_option.c layers), and are m_options only for --list-options
and (oddly) the split_opt_silent() function.
This reverts commit e30fe38a21.
The original author as well as the author from d568eaa2 agreed to LGPL
now. The only one missing is 0842caf6 (Henk could not be reached, and
that will probably stay this way).
When I discussed this with someone else who knows a lot about copyright
(j-b), the conclusion was that the rewrite was actually enough to
remove all past copyright. Only the syntax and the option name remained
the same, but code, code structure, and architecture all changed
radically. So I'm content with dropping the GPL part.
(m_option.c is still formally GPL due to the special agreement with
michael, but once this is fullfilled, we will change the license to
LGPL without further checks.)
In commit eb22569ff0, I claimed that the geometry parsing code was
rewritten. But I'm not sure if it's rewritten enough, or if copyright
claims could still be made. Given that the original code was
self-contained, and could be considered a separate work, it's probably
safer (and more up to the standards applied to this relicensing) to
leave this as GPL code.
The rewrite/code move can be seen with: git diff f2dcdca...ccaed5e
All authors of the current code have agreed (as far as this commit
requires).
options.c/options.h will take more effort, because it contains all the
option declarations, and thus is touched extremely often.
m_option.c is technically still GPL, because of commit 2c82d5a1d8
(michael has agreed to LGPL, but only once the core of mpv is LGPL).
The geometry parsing code in m_option.c was originally by someone who
could not be reached. However, it was heavily rewritten anyway, and only
the syntax remains (i.e. not copyright-relevant).
parse_commandline.c contains a change by "adland" (commit 1d0ac71ae8),
who could not be reached - this this specific part is GPL only.
Fortunately, it matters only for DVD (and even then is more like a hack,
but whatever).
There are some other relevant changes, but they have all been reverted,
moved somewhere else, deleted, or replaced.
"@name:!" becomes simply "@name". This is actually slightly more complex
to parse, but makes for a much simpler syntax and will be less weird to
the user. Suggested by haasn.
The old syntax is now rejected with an error.
Also add some more explicit error checks, instead of e.g. allowing empty
filter names and erroring only when it's not found.
It should default to true, but setting the filter list via mpv_node
(relevant for client API and Lua scripting) left it to false.
Also "document" the flag.
Basically, see the example in input.rst.
This is better than the "old" vf-toggle method, because it doesn't
require the user to duplicate the filter string in mpv.conf and
input.conf.
Some aspects of this changes are untested, so enjoy your alpha testing.
Remove more stuff that was needed only for legacy suboptions.
One user-visible change is that parent-options like --tv are now not
visible anymore. They lead to a special error message when used before,
but now they're simply not part of the option list anymore.
Long planned. Leads to some sanity.
There still are some rather gross things. Especially g_groups is ugly,
and a hack that can hopefully be removed. (There is a plan for it, but
whether it's implemented depends on how much energy is left.)
There were multiple values under M_OPT_EXIT (M_OPT_EXIT-n for n>=0).
Somehow M_OPT_EXIT-n either meant error code n (with n==0 no error?), or
the number of option valus consumed (0 or 1). The latter is MPlayer
legacy, which left it to the option type parsers to determine whether an
option took a value or not. All of this was changed in mpv, by requiring
the user to use explicit syntax ("--opt=val" instead of "-opt val").
In any case, the n value wasn't even used (anymore), so rip this all
out. Now M_OPT_EXIT-1 doesn't mean anything, and could be used by a new
error code.
vo_opengl sub-option were always rather annoying to handle. It seems
better to make them global options instead. This is simpler and easier
to use. The only disadvantage we are aware of is that it's not clear
that many/all of these new global options work with vo_opengl only.
--vo=opengl-hq is also deprecated.
There is extensive compatibility with the old behavior. One exception is
that --vo-defaults will not apply to opengl-hq (though with opengl it
still works). vo-cmdline is also dysfunctional and will be removed in a
following commit.
These changes also affect opengl-cb.
The update mechanism is still rather inefficient: it requires syncing
with the VO after each option change, rather than batching updates.
There's also no granularity (video.c just updates "everything", and if
auto-ICC profiles are enabled, vo_opengl.c will fetch them on each
update).
Most of the manpage changes were done by Niklas Haas <git@haasn.xyz>.
Positional parameters cause problems because they can be ambiguous with
flag options. If a flag option is removed or turned into a non-flag
option, it'll usually be interpreted as value for the first sub-option
(as positional parameter), resulting in very confusing error messages.
This changes it into a simple "option not found" error.
I don't expect that anyone really used positional parameters with --vo
or --ao. Although the docs for --ao=pulse seem to encourage positional
parameters for the host/sink options, which means it could possibly
annoy some PulseAudio users.
--vf and --af are still mostly used with positional parameters, so this
must be a configurable option in the option parser.
Instead, add a hacky OPT_ASPECT option type, which only exists to accept
a "no" parameter, which in combination with the "--no-..." handling code
makes --no-video-aspect work again.
We can also remove the code in m_config.c, which only existed to make
"--no-aspect" (a deprecated alias) to work.
This is basically dead code, and even the commit that added this code 4
years ago said that this should be for debugging only.
(Though it is possible that the clamp callback was used for something
else, and then unused again. Also, some of the clamping code remains and
is used for internal checking, e.g. clamp_double().)
It's actually redundant with whether m_option_type.free is set. Some
option types were flagged inconsistently. Its only use was for running
an additional sanity check without any real functionality.
This commit adds an --audio-channel=auto-safe mode, and makes it the
default. This mode behaves like "auto" with most AOs, except with
ao_alsa. The intention is to allow multichannel output by default on
sane APIs. ALSA is not sane as in it's so low level that it will e.g.
configure any layout over HDMI, even if the connected A/V receiver does
not support it. The HDMI fuckup is of course not ALSA's fault, but other
audio APIs normally isolate applications from dealing with this and
require the user to globally configure the correct output layout.
This will help with other AOs too. ao_lavc (encoding) is changed to the
new semantics as well, because it used to force stereo (perhaps because
encoding mode is supposed to produce safe files for crap devices?).
Exclusive mode output on Windows might need to be adjusted accordingly,
as it grants the same kind of low level access as ALSA (requires more
research).
In addition to the things mentioned above, the --audio-channels option
is extended to accept a set of channel layouts. This is supposed to be
the correct way to configure mpv ALSA multichannel output. You need to
put a list of channel layouts that your A/V receiver supports.
Center window position after applying W and H parameters of the --geometry
option. Passing valid X and Y values will still override the position.
Fixes#2397.
Options/properties that are choices, and which include "yes" or "no"
values (or both) can now be read and written as MPV_FORMAT_FLAG.
For write access, rejecting flags in these cases was obnoxiously
unintuitive and inconvenient.
For read access, the value of this is less convincing, and actually it's
a major API change. At this point I probably have to admit that the
finer details of the client API are very unstable.
If a mpv_node wrapped a string, the behavior was different from calling
mpv_set_property() with MPV_FORMAT_STRING directly. Change this.
The original intention was to be strict about types if MPV_FORMAT_NODE
is used. But I think the result was less than ideal, and the same change
towards less strict behavior was made to mpv_set_option() ages ago.
This flags stuff tried to be too clever - if there are overlapping flags
(e.g. exclusive or combined flags), the one matching with most bits has
to be chosen.
This fixes logging of the seek command. E.g. "relative" and "absolute"
overlap to make them exclusive, but "relative" was always printed as it
happened to match first.
Useful for dealing with libavfilter's terrible graph syntax.
Not strictly backwards compatible (for example "[a[b]" fails now - the
"[" within the quote is interpreted now). But hopefully it's obscure
enough not to warrant any kind of compatibility hacks.
It was ignored before. Passing an argument makes no sense, and might be
mistaken for some form of --vf-del, so complain about it.
This also affects --af-clr and the vf/af commands.
Use OPT_CHOICE_C() instead of the custom parser. The functionality is
pretty much equivalent.
(On a side note, it seems --video-stereo-mode can't be removed, because
it controls whether to "reduce" stereo video to mono, which is also the
default. In fact I'm not sure how this should be handled at all.)
Remove the colorspace-related top-level options, add them to vf_format.
They are rather obscure and not needed often, so it's better to get them
out of the way. In particular, this gets rid of the semi-complicated
logic in command.c (most of which was needed for OSD display and the
direct feedback from the VO). It removes the duplicated color-related
name mappings.
This removes the ability to write the colormatrix and related
properties. Since filters can be changed at runtime, there's no loss of
functionality, except that you can't cycle automatically through the
color constants anymore (but who needs to do this).
This also changes the type of the mp_csp_names and related variables, so
they can directly be used with OPT_CHOICE. This probably ended up a bit
awkward, for the sake of not adding a new option type which would have
used the previous format.
Pretty messy, which is why it wasn't done at first. (Also, I'd really
like to have simpler syntax and semantics for this damn option, but who
knows when this will happen.)
Fixes#1705.
In the past it happened quite often that flag options (yes/no) were
changed to choice options (yes/no/some more). The problem with this was
that while flag options don't need a parameter, this wasn't the case
with choice options. A hack was introduced to compensate for this:
setting M_OPT_OPTIONAL_PARAM on the option, and an empty string ("") was
added as choice, so that the choice could be used like a flag. So, for
example, "--mute" would set the choice "".
Fix this by 1. not requiring a parameter if there's a "yes" choice, and
2. redirect an empty parameter to "yes". The effect is that a choice
option with the choices ["yes", "no"] is pretty much equivalent to a
flag option.
Make it accept "," as separator, instead of only ":". Do this by using
the key-value-list parser. Before this, the option was stored as a
string, with the option parser verifying that the option value as
correct. Now it's stored pre-parsed, although the log levels still
require separate verification and parsing-on-use to some degree (which
is why the msg-level option type doesn't go away).
Because the internal type changes, the client API "native" type also
changes. This could be prevented with some more effort, but I don't
think it's worth it - if MPV_FORMAT_STRING is used, it still works the
same, just with a different separator on read accesses.
