These conflict with options of the same name, and prevent a "full"
unification. Not addressed is the "cache" property, and possibly a few
properties that behave differently from their equivalent options.
Now options are accessible through the property list as well, which
unifies them to a degree.
Not all options support runtime changes (meaning affected components
need to be restarted for the options to take effects). Remove from the
manpage those properties which are cleanly mapped to options anyway.
From the user-perspective they're just options available through the
property interface.
Positional parameters cause problems because they can be ambiguous with
flag options. If a flag option is removed or turned into a non-flag
option, it'll usually be interpreted as value for the first sub-option
(as positional parameter), resulting in very confusing error messages.
This changes it into a simple "option not found" error.
I don't expect that anyone really used positional parameters with --vo
or --ao. Although the docs for --ao=pulse seem to encourage positional
parameters for the host/sink options, which means it could possibly
annoy some PulseAudio users.
--vf and --af are still mostly used with positional parameters, so this
must be a configurable option in the option parser.
Instead, add a hacky OPT_ASPECT option type, which only exists to accept
a "no" parameter, which in combination with the "--no-..." handling code
makes --no-video-aspect work again.
We can also remove the code in m_config.c, which only existed to make
"--no-aspect" (a deprecated alias) to work.
The client API can do this (and there are apparently some libmpv using
projects which rely on this). But it's just unnecessary bloat as it
requires a separate code path from the option parser. It would be better
to remove this code. Formally deprecate it, including API bump and
warning in the API changes file to make it really clear.
Normally, OSD can be disabled with --osd-level=0. But this also disables
terminal OSD, and some users want _only_ the terminal OSD. Add
--video-osd=no, which essentially disables the video OSD.
Ideally, it should probably be possible to control terminal and video
OSD levels independently, but that would require separate OSD timers
(and other state) for both components, so don't do it. But because the
current situation isn't too ideal, add a threat to the manpage that
might be changed in the future.
Fixes#3387.
The --image-display-duration option controls how long an image is
displayed. It's also possible to display the image forever (until manual
user interaction stops playback).
With this, the core drops the old method to "drain" video (i.e. waiting
for the last frame duration on end of playback). Instead, we reuse
MPContext.time_frame. The old mechanism was disabled for non-images
anyway.
Fixes#3425.
This commit adds an --audio-channel=auto-safe mode, and makes it the
default. This mode behaves like "auto" with most AOs, except with
ao_alsa. The intention is to allow multichannel output by default on
sane APIs. ALSA is not sane as in it's so low level that it will e.g.
configure any layout over HDMI, even if the connected A/V receiver does
not support it. The HDMI fuckup is of course not ALSA's fault, but other
audio APIs normally isolate applications from dealing with this and
require the user to globally configure the correct output layout.
This will help with other AOs too. ao_lavc (encoding) is changed to the
new semantics as well, because it used to force stereo (perhaps because
encoding mode is supposed to produce safe files for crap devices?).
Exclusive mode output on Windows might need to be adjusted accordingly,
as it grants the same kind of low level access as ALSA (requires more
research).
In addition to the things mentioned above, the --audio-channels option
is extended to accept a set of channel layouts. This is supposed to be
the correct way to configure mpv ALSA multichannel output. You need to
put a list of channel layouts that your A/V receiver supports.
This requires changing the pixel upload alignment because the odd sizes
might not be aligned to multiples of 4.
Anyway, the restriction has no real benefit and the sizes in between 32
and 64 might be worth using, so just drop it.
Following testing after ebe798a, this is a more than sufficient size to
cover our use case.
The old default was a drop of about 58 dB PSNR using the old code, and
this new default is about 65 dB PSNR, so it's actually an improvement
despite resulting in a smaller size.
There was no outlier whatsoever when comparing sizes around the 64
neighbourhood (with every step corresponding to a PSNR drop of about
0.07 dB), so I picked this since it's a power of two and requires no
change to the current 3dlut-size parsing logic.
I also tested smaller sizes such as 32x32x32 which performed almost as
well on colorful samples, but this results in noticeable black boost in
the dark regions, which is pretty undesirable. Therefore, we should
avoid going much further below 64x64x64.
Either way, this new size is so fast to compute that the 3dlut cache is
almost useless on my end. In fact, it might even be slower to load the
profile from the cache than to recompute it from scratch. (For caches on
a disk. For cache on a tmpfs, it makes no difference)
mixer.c didn't really deserve to be separate anymore, as half of its
contents were unnecessary glue code after recent changes. It also
created a weird split between audio.c and af.c due to the fact that
mixer.c could insert audio filters. With the code being in audio.c
directly, together with other code that unserts filters during runtime,
it will be possible to cleanup this code a bit and make it work like the
video filter code.
As part of this change, make the balance code work like the volume code,
and add an option to back the current balance value. Also, since the
balance semantics are unexpected for most users (panning between the
audio channels, instead of just changing the relative volume), and there
are some other volumes, formally deprecate both the old property and the
new option.
Old-style commands using _ as separator (e.g. show_progress) were still
used in some places, including documentation and configuration files.
This commit updates all such instances to the new style (show-progress)
so that commands are easier to find in the manual.
Since it turns out that knowing what exactly a file was tagged with can
be useful for debugging purposes, expose this as a property so I can
check it more easily.
This is mostly useful for sig-peak (since nom-peak is currently entirely
calculated by us), but I added both for consistency.
Drop the code for switching the volume options and properties between
af_volume and AO volume controls. interface-changes.rst mentions the
changes in detail.
Do this because this was exceedingly complex and had other problems as
well. It was also very hard to test. It's just not worth the trouble.
Some leftovers like AOCONTROL_HAS_PER_APP_VOLUME will be removed at a
later point.
Fixes#3322.
Working towards refcounted sub images, and also for removing bitmap
packers from VOs.
I'm not sure why we even have this overlay-add command. It was sort of
"needed" before opengl-cb was introduced, and before Lua scripts could
put ASS drawings on OSD without conflicting with the OSC. But now trying
to use it doesn't make too much sense anymore.
Still keep it because we're trying to be nice, but throw performance out
of the window. Now image data is copied 2 more times before displaying
it. This also makes using the command a bit simpler.
User request and not that hard. Closes#3157.
Note that FFmpeg doesn't support this and there's no signalling in HEVC
etc., so the only way users can access it is by using vf_format
manually.
Mind: This encoding uses full range values, not TV range.
This is actually not entirely trivial since it involves negative Yxy
coordinates, so the CMM has to be capable of full floating point
operation. Fortunately, LittleCMS is, so we can just blindly implement
it.
Most devices seems to require special signalling (e.g. via HDMI
metadata) to actually decode HDR signals and treat them as such, so it's
probably worth warning the potential user about the fact that mpv pretty
definitely does *not* set any of this metadata signalling.
This HDR function is unique in that it's still display-referred, it just
allows for values above the reference peak (super-highlights). The
official standard doesn't actually document this very well, but the
nominal peak turns out to be exactly 12.0 - so we normalize to this
value internally in mpv. (This lets us preserve the property that the
textures are encoded in the range [0,1], preventing clipping and making
the best use of an integer texture's range)
This was grouped together with SMPTE ST2084 when checking libavutil
compatibility since they were added in the same release window, in a
similar timeframe.
