Move multiple GL-specific things from the renderer to other places like
vo_opengl.c, vo_opengl_cb.c, and ra_gl.c.
The vp_w/vp_h parameters to gl_video_resize() make no sense anymore, and
are implicitly part of struct fbodst.
Checking the main framebuffer depth is moved to vo_opengl.c. For
vo_opengl_cb.c it always assumes 8. The API user now has to override
this manually. The previous heuristic didn't make much sense anyway.
The only remaining dependency on GL is the hwdec stuff, which is harder
to change.
Further work removing GL dependencies from the actual video renderer,
and moving them into ra backends.
Use of glInvalidateFramebuffer() falls away. I'd like to keep this, but
it's better to readd it once shader runs are in ra.
This was attempted before in fc9695e63b, but it was reverted in
1b7ce759b1 because it caused conflicts with other software watching
the same keys (See #2041.) It seems like some PCs ship with OEM software
that watches the volume keys without consuming key events and this
causes them to be handled twice, once by mpv and once by the other
software.
In order to prevent conflicts like this, use the WM_APPCOMMAND message
to handle media keys. Returning TRUE from the WM_APPCOMMAND handler
should indicate to the operating system that we consumed the key event
and it should not be propogated to the shell. Also, we now only listen
for keys that are directly related to multimedia playback (eg. the
APPCOMMAND_MEDIA_* keys.) Keys like APPCOMMAND_VOLUME_* are ignored, so
they can be handled by the shell, or by other mixer software.
This currently only works when using lcms-based color management
(--icc-profile-*).
In principle, we could also support using lcms even when the user has
not specified an ICC profile, by generating the profile against a fixed
reference (--target-prim/--target-trc) instead. I still might do that
some day, simply because 3dlut provides a higher quality conversion than
our simple gamut mapping does for stuff like BT.2020, and also because
it's now needed to enable embedded ICC profiles. But that would be a
separate change, so preserve the status quo for now.
(Besides, my opinion is still that you should be using an ICC profile if
you care about colors being accurate _at all_)
This broke float textures, which were actually used by some shaders.
There were probably some other bugs as well.
Lots of code can be avoided by using ra_tex_params directly, so do that.
The main change is that COMPONENT/FORMAT are replaced by a single FORMAT
directive, which takes different parameters now. Due to the mess with
16/32 bit float textures, and because we want to support other APIs than
just GL in the future, it's not really clear how this should be handled,
and the nice component/type separation makes things actually harder. So
just jump the gun and use the ra_format.name names, which were
originally meant mostly for debugging. (This is probably something that
will be regretted later.)
Still only superficially tested, but seems to work.
Fixes#4708.
Since this code was already written for HDR, and is now per-channel
(because it works better for HDR as well), we can actually reuse this to
get very high quality gamut mapping without clipping. The only required
change is to move the tone mapping from before the gamut map to after
the gamut map. Additonally, we need to also account for changes in the
signal range as a result of applying the CMS when we compute ref_peak,
which is fortunately pretty easy because we only need to consider the
case of primaries mapping to themselves.
Since `HDR` no longer really makes sense as a label, rename it to
`--tone-mapping` in general. Also fits better with
`--tone-mapping-desat` etc.
Arguably we could also rename `--hdr-compute-peak`, but that option is
basically only useful for HDR content anyway because we don't need
information about the signal range for gamut mapping.
This (finally!) gives us reasonably high quality gamut mapping even in
the absence of an ICC profile / 3DLUT.
Parsing the texture data as raw strings makes the textures the most
portable and self-contained. In order to facilitate different types of
shaders, the parse_user_shader interaction has been changed to instead
have it loop through blocks and call the passed functions for each valid
block parsed. This is more modular and also cleaner, with better code
separation.
Closes#4586.
Two changes, compounded into one since they affect the same logic:
1. Never use linearization for HDR downscaling
2. Always use linearization for interpolation
Instead of fixing p->use_linear at the beginning of pass_render_frame,
we flip it on "dynamically" as needed. I plan on killing this
p->use_linear frame (along with other per-pass metadata) and moving them
into their own struct for tracking the "current" state of the video, but
that's a separate/upcoming refactor.
As a small bonus, reduce some code duplication in the interpolation
logic.
Fixes#4631
I've found more test cases where hwdec=cuda shits itself, even
hwdec=cuda-copy. So the whole “copyback is no worse than swdec” is
simply not true. Also, in the light of 10 bit media files and APIs
silently truncating to 8 bit, the warnings need to be generalized a bit.
It's no longer safe to say that “doesn't convert to RGB” means “perfect
playback”.
I've also added a very strong disclaimer to the whole hwdec scenario
clarifying why hwdec is usually a bad idea unless absolutely needed,
because I've seen issue after issue that is resolved by disabling hwdec.
This is done via compute shaders. As a consequence, the tone mapping
algorithms had to be rewritten to compute their known constants in GLSL
(ahead of time), instead of doing it once. Didn't affect performance.
Using shmem/SSBO atomics in this way is extremely fast on nvidia, but it
might be slow on other platforms. Needs testing.
Unfortunately, setting up the SSBO still requires OpenGL calls, which
means I can't have it in video_shaders.c, where it belongs. But I'll
defer worrying about that until the backend refactor, since then I'll be
breaking up the video/video_shaders structure anyway.
Can be enabled via --vd-lavc-dr=yes. See manpage additions for what it
does.
This reminds of the MPlayer -dr flag, but the implementation is
completely different. It's the same basic concept: letting the decoder
render into a GPU buffer to avoid a copy. Unlike MPlayer, this doesn't
try to go through filters (libavfilter doesn't support this anyway).
Unless a filter can work in-place, DR will be silently disabled. MPlayer
had very complex semantics about buffer types and management (which
apparently nobody ever understood) and weird restrictions that mostly
limited it to mpeg2 style codecs. The mpv code does not do any of this,
and just lets the decoder allocate an arbitrary number of untyped
images. (No MPlayer code was used.)
Parts of the code based on work by atomnuker (starting point for the
generic code) and haasn (some GL definitions, some basic PBO code, and
correct fencing).
Remove this code because it could be argued that it contains GPL-only
code (see commit 642e963c86 for details).
The remaining aspect methods appear to work just as well, are
potentially more compatible to other players, and the code becomes much
simpler.
Performance seems pretty much unchanged but I no longer get nasty spikes
on NUMA systems, probably because glBufferSubData runs in the driver or
something.
As a simplification of the code, we also just size the PBO to always
have the full size, even for cropped textures. This seems slower but not
by relevant amounts, and only affects e.g. --vf=crop. It also slightly
increases VRAM usage for textures with big strides.
This new code path is especially nice because it no longer depends on
GL_ARB_map_buffer_range, and no longer uses any functions that can
possibly fail, thus simplifying control flow and seemingly deprecating
the manpage's claim about possible image corruption.
In theory we could also reduce NUM_PBO_BUFFERS since it doesn't seem
like we're streaming uploads anyway, but leave it in there just in
case some drivers disagree...
It used to use the "encoding" section. Change this to the default
section to remove another small special case. encoding-profiles.conf
didn't use this by default anyway. The previous revert could mitigate
potential impacts of this a little.
This is more of a niche usecase than --ytdl-format and --ytdl-raw-options,
so a simple script option should be enough.
Either create lua-settings/ytdl_hook.conf with
'exclude=example.com,sub.example.com' option or
"--script-opts=ytdl_hook-exclude=example.com,sub.example.com"
This just indicates a fixed linear coefficient to multiply into the
signal, similar to the old option --target-brightness (but the inverse
thereof). Good for testing purposes, which is why I added it. (This also
corresponds somewhat to what zimg does)
It's now possible to request non-dumb mode as a user, even when not
using any non-dumb features. This change is mostly intended for testing,
so I can easily switch between dumb and non-dumb mode on default
settings. The default behavior is unaffected.
Was at least somewhat broken, and is misleading. I don't really have an
idea why FFmpeg has two AVOptions here anyway. We don't need to care,
and I'm only aware of 1 user trying this option ever.
See #4579.
This is exposed so that bjin/mpv-prescalers can use textureGatherOffset
for performance.
Since there are now quite a lot of parameters where it isn't quite clear
why they're all defined, add a paragraph to the man page that explains
them a bit.
This helps prevent unnaturally, weirdly colorized blown out highlights
for direct images of the sunlit sky and other way-too-bright HDR
content. I was debating whether to set the default at 1.0 or 2.0, but
went with the more conservative option that preserves more detail/color.
This is more efficient on my machine (nvidia), but only when applied to
groups of exactly 4 texels. So we switch to the more efficient
textureGather for groups of 4. Some notes:
- textureGatherOffset seems to be faster than textureGather by a
non-negligible amount, but for some reason, textureOffset is still
slower than a straight-up texture
- textureGather* requires GLSL 400; and at least on nvidia, this
requires actually allocating a GL 4.0 context.
- the code in opengl/common.c that clamped the GLSL version to 330 is
deprecated, because the old user shader style has been removed
completely in the meantime
- To combat the growing complexity of the polar sampling code, we drop
the antiringing functionality from EWA shaders completely, since it
never really worked well for EWA to begin with. (Horrific artifacting)
This allows filter functions to be prematurely cut off once their
contributions start becoming insignificant. This effectively prevents
wasted GPU time sampling from parts of the function that are essentially
reduced to zero by the window function, providing anywhere from a 10% to
20% speedup. (5700μs -> 4700μs for me)
This is more confusing than it helps, and forces escaping more stuff.
For example, for string lists we could remove all need for escaling with
-add and -pre.
The user can simply use multiple of those options.
This replaces `vo-performance` by `vo-passes`, bringing with it a number
of changes and improvements:
1. mpv users can now introspect the vo_opengl passes, which is something
that has been requested multiple times.
2. performance data is now measured per-pass, which helps both
development and debugging.
3. since adding more passes is cheap, we can now report information for
more passes (e.g. the blit pass, and the osd pass). Note: we also
switch to nanosecond scale, to be able to measure these passes
better.
4. `--user-shaders` authors can now describe their own passes, helping
users both identify which user shaders are active at any given time
as well as helping shader authors identify performance issues.
5. the timing data per pass is now exported as a full list of samples,
so projects like Argon-/mpv-stats can immediately read out all of the
samples and render a graph without having to manually poll this
option constantly.
Due to gl_timer's design being complicated (directly reading performance
data would block, so we delay the actual read-back until the next _start
command), it's vital not to conflate different passes that might be
doing different things from one frame to another. To accomplish this,
the actual timers are stored as part of the gl_shader_cache's sc_entry,
which makes them unique for that exact shader.
Starting and stopping the time measurement is easy to unify with the
gl_sc architecture, because the existing API already relies on a
"generate, render, reset" flow, so we can just put timer_start and
timer_stop in sc_generate and sc_reset, respectively.
The ugliest thing about this code is that due to the need to keep pass
information relatively stable in between frames, we need to distinguish
between "new" and "redrawn" frames, which bloats the code somewhat and
also feels hacky and vo_opengl-specific. (But then again, this entire
thing is vo_opengl-specific)
The changes to path list options is basically getting rid of the need to
pass multiple paths to a single option. Instead, you can use the option
multiple times. The old behavior can be used by using the -set suffix
with the option.
Change some options to path lists. For example --script is now append by
default, and if you use --script-set, you need to use ":"/";" as
separator instead of ",".
--sub-paths/--audio-file-paths is a deprecated alias now, and will break
if the user tries to pass multiple paths to it. I'm assuming that if
these are used, most users will pass only 1 path anyway.
--opengl-shaders has more compatibility handling, since it's probably
rather common that users pass multiple options to it.
Also document all that in the manpage.
I'll probably regret this later, as it somewhat increases the complexity
of the option parser, rather than increasing it.
I noticed that the previous default, bitstream, actually breaks with
some shitty anamorphic DVD rips that signal square pixel aspect in the
bitstream. So I think the "container" method is a better default.
You could do mpv_set_option(h, "no-fs", ""), which would behave like
"--no-fs" on the command line. At one point, this had to be emulated for
compatibility, and printed a deprecation warning. This was almost a year
ago, so remove it.
