Convert all these commands to properties. (Except tv_last_channel, not
sure what to do with this.) Also, internally, don't access stream
details directly, but dispatch commands with stream ctrls.
Many of the new properties are a bit strange, because they're write-
only. Also remove some OSD output these commands produced, because I
couldn't be bothered to port these.
In general, this makes everything much cleaner, and will also make it
easier to e.g. move the demuxer to its own thread.
Don't bother updating input.conf, but changes.rst documents how old
commands map to the new ones.
Mostly untested, due to lack of hardware.
The window close button is usually mapped to the CLOSE_WIN pseudo-key.
Until now, --input-test treated this pseudo-key like any other key (like
the rest of the input handling code), so you couldn't close the window
in this mode. The manpage had silly instructions and warnings how to
deal with this.
Just always quit when CLOSE_WIN is received, and improve the
instructions.
This might be helpful if we ever want cascading config files. Also, we
will probably need it if we change the default input.conf bindings, and
want to provide compatibility input.conf files.
This is probably useful.
Note that this includes a small, stupid hack to prevent loading of the
config file if vf_lavfi is not available. The profile by default uses
vf_lavfi, and the config parser will output errors if vf_lavfi is not
available.
As another caveat, we install the example profile even if encoding is
disabled (though we don't load it, since this would print errors).
Currently KDE will copy a media file into a temporary folder instead of
trying to stream it if a KIO slave location file is started. This change
will tell KDE to make mpv try to directly play the file. Perhaps the
proper flags should be added according to the individual enabled
features of the build but I suggest that be for the future.
Signed-off-by: wm4 <wm4@nowhere>
This readds a more or less completely new dvdnav implementation, though
it's based on the code from before commit 41fbcee. Note that this is
rather basic, and might be broken or not quite usable in many cases.
Most importantly, navigation highlights are not correctly implemented.
This would require changes in the FFmpeg dvdsub decoder (to apply a
different internal CLUT), so supporting it is not really possible right
now. And in fact, I don't think I ever want to support it, because it's
a very small gain for a lot of work. Instead, mpv will display fake
highlights, which are an approximate bounding box around the real
highlights.
Some things like mouse input or switching audio/subtitles stream using
the dvdnav VM are not supported.
Might be quite fragile on transitions: if dvdnav initiates a transition,
and doesn't give us enough mpeg data to initialize video playback, the
player will just quit.
This is added only because some users seem to want it. I don't intend to
make mpv a good DVD player, so the very basic minimum will have to do.
How about you just convert your DVD to proper video files?
The mpv.desktop file is taken from the Arch package [1]. It appears to
be based on the mplayer2 git mplayer.desktop file (e.g. very similar
MimeType field), with minor modifications applied by Arch package
maintainers.
Note that for now, this doesn't show a terminal (Terminal=false), which
might not always be ideal. For example, if the file is audio only, or
if VO initialization fails for some reason, mpv will run in the
background and play audio without showing a window. But users prefer
running it without terminal, and don't want to play audio files with
it.
Maybe a --force-window option will be added in the future, which would
always create a VO window, and compensate for these issues.
[1] https://aur.archlinux.org/packages/mpv-git/
Remove options which are too obscure and most likely not very useful in
general, or update them to something more modern. Add some comments
about how configuration files work in general.
This affects MOUSE_MOVE and MOUSE_LEAVE. Both are needed internally
(such as for the OSC), but not really useful for input.conf. Since the
warning has the purpose of notifying the user that a key is unmapped and
what key name to use for setting up a binding in input.conf, the warning
is rather useless in this case. It's also annoying in combination with
the
--no-input-default-bindings option, since that removes the default
bindings to "ignore" for these keys.
The png file added to etc/ are taken from the link mentioned in commit
303096b, except that they have been converted to 16 bit, sRGB (with
color profile info dropped, if there was one), and transparent pixels
reset for better compression.
The file x11_icon.bin is generated by gen-x11-icon.sh. I'm adding it to
the git repo directly, because the script requires ImageMagick, and we
don't want to make building even more complicated.
The way how this is done is basically a compromise between effort
required in x11_common.c and in gen-x11-icon.sh. Ideally, x11_icon.bin
would be directly in the format as required by _NET_WM_ICON, but trying
to write the binary width/height values from shell would probably be a
nightmare, so here we go.
The zlib code in x11_common.c is lifted from demux_mkv.c, with some
modifications (like accepting a gzip header, because I don't know how to
make gzip write raw compressed data).
I suspect most users will just copy etc/input.conf when they want to
remap some default bindings. But usually this means the user even copies
bindings he doesn't care about, and it's better if the user maps only
the bindings in his input.conf the user intends to remap.
Comment all bindings in etc/input.conf. Since this file also defines the
builtin defaults and is baked into the mpv binary, we have to do
something to get them anyway, even though they are commented. Do this by
having input.c "uncomment" the bindings in the baked in input.conf. (Of
course this is done only for the builtin config, not configs loaded from
disk.)
I would like to thank Chris Ward (@tenzerothree, http://tenzerothree.com/) for
working on the art for these icons and bringing some eye candy to the project.
The PSDs made by Chris are available on our Dropbox [1], along with the exports
I made to create OSX and Windows icons. The PSDs are almost completly vector
and all the resolutions look really similar, except the 16px favicon which was
handcrafted to look better and more recognizeable on the smaller pixel budget.
For Mac OS X the icons were created using iconutils on the PNGs iconsets
exported from the PSDs. These even support retina resolutions (except 512@2x).
For Windows the .ico file was created with imagemagick. The included images
are 16px, 24px, 32px, 48px 64px, 256px. These are the resolutions listed on
MSDN for supporting Windows XP [2] and Windows versions based on Aero [3].
Only 32bit PNGs were used since it is 2013.
For Linux nothing changed yet, even though @wm4 talked about using the PNGs
directly there. This will probably be dealt with in a later commit.
[1]: https://www.dropbox.com/sh/yelfoj9tbft7o06/A8vOT6JKaG
[2]: http://msdn.microsoft.com/en-us/library/ms997636.aspx
[3]: http://msdn.microsoft.com/en-us/library/aa511280.aspx
Change how the HW decoding stuff is organized, the way it's initialized
in particular. Instead of duplicating the list of supported codecs for
hwaccel decoders, add a probe function which allows each decoder to
report whether it supports a given codec.
Add an "auto" choice to the --hwdec option, which automatically enables
hardware decoding if libavcodec and/or the VO supports it.
What mpv prints on the terminal changes a bit. Now it will just print
a single line whether hw decoding is used or not (and nothing at all if
no hw decoding at all was requested). The pretty violent fallback from
hw decoding to software decoding is still quite verbose and evil-looking
though.
Support horizontal and vertical axes of input devices.
If the input device support precise scrolling with an input value then it
should first be scaled to a standard multiplier, where 1.0 is the default.
The multiplier will then applied to the following commands if possible:
* MP_CMD_SEEK
* MP_CMD_SPEED_MULT
* MP_CMD_ADD
All other commands will triggered on every axis event, without change the
values specified in the config file.
This slightly increases file size due to needless downscaling on the device due
to aspect correction, but keeps quality as is and prevents encoding errors
caused by odd height/width.
Also, implement mouse leave events for X11. But evne on other
platforms, these events will be generated if mouse crosses a section's
mouse area boundaries within the mpv window.
