This improves upon the previous commit, and partially rewrites it (and
other code). It does:
- disable the seeking within cache by default, and add an option to
control it
- mess with the buffer estimation reporting code, which will most likely
lead to funny regressions even if the new features are not enabled
- add a back buffer to the packet cache
- enhance the seek code so you can seek into the back buffer
- unnecessarily change a bunch of other stuff for no reason
- fuck up everything and vomit ponies and rainbows
This should actually be pretty usable. One thing we should add are some
properties to report the proper buffer state. Then the OSC could show a
nice buffer range. Also configuration of the buffers could be made
simpler. Once this has been tested enough, it can be enabled by default,
and might replace the stream cache's byte ringbuffer.
In addition it may or may not be possible to keep other buffer ranges
when seeking outside of the current range, but that would be much more
complex.
More the ignore_eof field to the internal demux_stream struct. This is
relatively messy, because the internal struct exists only once the
stream is created, and after that setting the ignore_eof flag is a race
condition. We could bother with adding demux_add_sh_stream() parameters
for this, but let's not. So in theory a tiny race condition is
introduced, which can never be triggered since all demux API functions
are called by the playback thread only anyway.
Fix that ts_offset is accessed without log (this was introduced much
earlier by myself).
Introduce an alternative way of avoiding the annoying EOF reached
messages by not resetting the EOF flags for CC streams when a CC packet
is added. This makes the second commit in the PR which added the
original fix unnecessary.
As another cosmetic change merge the check in cached_demux_control()
into a single if().
In the future, the CC pseudo-stream should probably be replaced with an
entire pseudo-demuxer or such, which would avoid some of the messiness
(or maybe not, we don't know yet).
In the extreme case, reading 1 byte would wake up the cache to make the
cache thread read 1 byte. This would be extremely inefficient. This will
not normally happen in our cache implementation, but it's still present
to some lesser degree. Normally you'd set a predefined "cache too low"
boundary, after which you would restart reading. For some reason
something like this is already present using a hardcoded value
(FILL_LIMIT - I don't even know the deeper reason why this exists). So
use that to reduce wakeups.
This doesn't fix redundant wakeups on EOFs, which is especially visible
should something keep retrying reading on EOF (like in an endless loop).
Regression since ec6e8a31e0. Removal of the explicit else case
always applies the conversion to premultiplied alpha in the else branch.
We want to scale with multiplied alpha, but we don't want to multiply
with alpha again on top of it.
Fixes#4983, hopefully.
This should be functionally identical to rgba16f, since the formats only
differ in their representation on the CPU, but it could be useful for RA
backends that don't expose rgba16f, like Vulkan. It's definitely useful
for the WIP D3D11 backend.
With video paused, changing the brightness controls (or similar) would
sometimes not rerender the video frame. So the OSD would redraw, but the
video wouldn't change. This is caused by output caching, and a redraw
request is free to return the cached frame. Change it such to invalidate
the cached frame if any of the options or the equalizer change.
In theory, gl_video_reset_surfaces() could be called if the equalizer
changes - this would apparently force interpolatzion to redraw all
frames. But this looks kind of crappy when changing the equalizer during
playback. It'll "eventually" use the correct settings anyway, and when
paused interpolation is off.
This was phased out, and was used only by vdpau by now. Drop the
mechanism and the vdpau special code, which means screenshots won't
include the vf_vdpaupp processing anymore. (I don't care enough about
vdpau, it's on its way out.)
The mechanism introduced in b135af6842 assumed AVHWFramesContext would
be enough. Apparently it's not - the intended use with Rockchip (not
Rokchip btw.) requires accessing actual frame data in order to access
the AVDRMFrameDescriptor struct.
Just pass the entire mp_image to the new function. This is more
flexible, although it slightly worries me that it will be less reusable
for things which require setting up mp_image_params before any real
frames are processed (such as filters).
The same should happen with any other side data that matters to mpv,
otherwise filters will drop it.
(No, don't try to argue that mpv should use AVFrame. That won't work.)
ffmpeg_garbage() is copy&paste from frame_new_side_data() in FFmpeg
(roughly feed201849b8f91), because it's not public API. The name
reflects my opinion about FFmpeg's API.
In mp_image_to_av_frame(), change the too-fragile
*new_ref = (struct mp_image){0};
into explicitly zeroing out the fields that are "transferred" to the
created AVFrame.
Merge mp_image_copy_fields_to_av_frame() into mp_image_from_av_frame(),
same for the other direction.
There isn't any good reason to keep them separate, and the refcounting
handling makes it only more awkward.
It seems this will be useful for Rokchip DRM hwcontext integration.
DRM hwcontexts have additional internal structure which can be different
depending on the decoder, and which is not part of the generic hwcontext
API. Rockchip has 1 layer, which EGL interop happens to translate to a
RGB texture, while VAAPI (mapped as DRM hwcontext) will use multiple
layers. Both will use sw_format=nv12, and thus are indistinguishable on
the mp_image_params level. But this is needed to initialize the EGL
mapping and the vo_gpu video renderer correctly.
We hope that the layer count is enough to tell whether EGL will
translate the data to a RGB texture (vs. 2 texture resembling raw nv12
data). For that we introduce MP_IMAGE_HW_FLAG_OPAQUE.
This commit adds the flag, infrastructure to set it, and an "example"
for D3D11.
The D3D11 addition is quite useless at this point. But later we want to
get rid of d3d11_update_image_attribs() anyway, while we still need a
way to force d3d11vpp filter insertion, so maybe it has some
justification (who knows). In any case it makes testing this easier.
Obviously it also adds some basic support for triggering the opaque
format for decoding, which will use a driver-specific format, but which
is not supported in shaders. The opaque flag is not used to determine
whether d3d11vpp needs to be inserted, though.
Mostly an obscure option for testing. But --videotoolbox-format can be
deprecated, as it becomes redundant.
We rely on the libavutil hwcontext implementation to reject invalid
pixfmts, or not to blow up if they are incompatible.
This was confusing at best. Change it to output the actual choices.
(Seems like in the end it's always me who has to clean up other people's
bullshit.)
Context names were not unique - but they should be, so fix it. The whole
point of the original --opengl-backend option was to side-step the
tricky auto-detection, so you know exactly what you get. The goal of
this commit is to make --gpu-context work the same way. Fix the
non-unique names by appending "vk" to the names.
Keep in mind that this was not suitable for slecting the "UI" backend
anyway, since "x11" would force GLX, whereas people on not-NVIDIA
actually want "x11egl". Users trying to use --gpu-context=x11 to force
the X11 backend would always end up with GLX, which would at least break
VAAPI hardware decoding for them. Basically the idea that this option
could select the "UI" type is completely broken - it selects an
implementation, which implies a UI. Selecting the UI type This would
require a separate mechanism. (Although in theory this separate
mechanism could be part of the --gpu-context option - in any case,
someone would have to implement it.)
To achieve help output that can actually be understood, just duplicate
the code. Most of that code is duplicated anyway, and trying to share
just the list code with the result of making the output unreadable
doesn't make too much sense. If we wanted to save code/effort, we could
just remove the help output altogether.
--gpu-api has non-unique entries, and it would be nice to group them
(e.g. list all OpenGL capable contexts with "opengl"), but C makes this
simple idea too much of a pain, so don't do it.
Also remove a stray tab from the android entry on the manpage.
If the chroma location is missing, vo_gpu will use centered chroma.
Select a better chroma location by default: normally, it will always be
MPEG video chroma location. If full levels are used, use JPEG chroma
location, because that sort of sounds like it could make sense as it
might coincide with JPEG being decoded.
See e.g. #4804.
Unfortunately I'm also adding the full text of the LGPL license text,
because the GPL one was already present in this repository, and I don't
want to imply that the GPL somehow has priority.
Every compositor (including toy compositors) has had support for wl_output v2
since forever, so there's little point in supporting degraded output for 5 year
old releases (especially considering we require zxdg6 which is far more recent).
This adds symbol information to the generated SPIR-V, which shows up in
the SPIR-V assembly dump. It's also useful for potential RA backends
that use SPIRV-Cross, since the symbol information is used in the
generated shader source.
Rename --enable-preliminary-lgpl2 to --enable-gpl. This concludes the
relicensing. Some things are still to do (relicensing some still-GPL
optional code), but we consider the code included by --enable-gpl to be
fully relicensed.
The relicensing was performed by asking every known author for
permission for relicensing it to LGPL version 2.1 "or later". If an
author could not be contacted or permission could not be obtained, and
the contribution was considered relevant for copyright purposes, the
affected code was either excluded from LGPL mode (not built), or removed
or rewritten. This is the standard in open source relicensing processes.
Keep in mind that using LGPL mode is still on the user's own risk. Even
though I claim that the relicensing was pretty clean and thorough
(measured on the standards of the open source community¹), and I
followed the advice of some actual experts, there is still a residual
uncertainty due to the fact that I'm not an all-knowing entity (authors
could have taken someone else's code and pretend it's their own) nor a
lawyer (meaning I might lack associated authority or expertise), and the
fact that the judicial system is far from deterministic. The relicensing
was performed merely to the best of my knowledge. I reject all
responsibility outside of that.
This commit also cleans up the "Copyright" file to reflect the finalized
relicensing process.
¹ Not to imply that the standards of commercial companies are much
higher. Some major tech companies get away with stuff I would not
consider clean.
See #2033.
This should actually cover all of them, if you take into account that
some unchanged GPL source files include header files with such checks.
Also this was done already for the libaf derived code.
This is only for "safety" and to avoid misunderstandings.
It turns out compositors which do scaling scale the cursor as well,
so every single surface needs to get scaled too.
Also, 32 corresponds to the default size for both GTK+ and KDE.
This new interface in libva2 offers a cleaner way to export surfaces
which can then be imported to EGL. In particular, this works with
the Mesa driver, so we can have proper playback without a pointless
download and upload on AMD cards.
This change does nothing with libva1, and will fall back to the
libva1 interface (vaDeriveImage() + vaAcquireBufferHandle()) if
vaExportSurfaceHandle() is not present.
Signed-off-by: wm4 <wm4@nowhere>
Rename --stats to --load-stats-overlay and add an entry to options.rst
over the original commit.
Signed-off-by: wm4 <wm4@nowhere>
