The MPlayer style syntax ("-mf fps=10:type=png") was removed a while
ago, and now only the flat variants ("--mf-fps=10" etc.) work.
CC: @mpv-player/stable
This adds a thread to the demuxer which reads packets asynchronously.
It will do so until a configurable minimum packet queue size is
reached. (See options.rst additions.)
For now, the thread is disabled by default. There are some corner cases
that have to be fixed, such as fixing cache behavior with webradios.
Note that most interaction with the demuxer is still blocking, so if
e.g. network dies, the player will still freeze. But this change will
make it possible to remove most causes for freezing.
Most of the new code in demux.c actually consists of weird caches to
compensate for thread-safety issues (with the previously single-threaded
design), or to avoid blocking by having to wait on the demuxer thread.
Most of the changes in the player are due to the fact that we must not
access the source stream directly. the demuxer thread already accesses
it, and the stream stuff is not thread-safe.
For timeline stuff (like ordered chapters), we enable the thread for the
current segment only. We also clear its packet queue on seek, so that
the remaining (unconsumed) readahead buffer doesn't waste memory.
Keep in mind that insane subtitles (such as ASS typesetting muxed into
mkv files) will practically disable the readahead, because the total
queue size is considered when checking whether the minimum queue size
was reached.
These consult the vertical resolution, matching against 576 for
PAL and 480/486 for NTSC. The documentation has also been updated.
Signed-off-by: wm4 <wm4@nowhere>
Notably, we now conform to SMPTE 428-1-2006 when decoding XYZ12 input,
and we can support rendering intents other than colorimetric when
converting between BT.709 and BT.2020, like with :srgb or :icc-profile.
This add support for reading primary information from lavc, categorized
into BT.601-525, BT.601-625, BT.709 and BT.2020; and passes it on to the
vo. In vo_opengl, we always generate the 3dlut against the wider BT.2020
and transform our source into this colorspace in the shader.
For remarks, pretty much see the manpage additions. Could help with
network streams that require too much seeking (maybe), or might be
extended to help with the use case of watching and downloading a file
at the same time.
In general, it might be a useless feature and could be removed again.
Also clarify the semantics.
It seems --idx didn't do anything. Possibly it used to change how the
now removed legacy demuxers like demux_avi used to behave. Or maybe
it was accidental.
--forceidx basically becomes --index=force. It's possible that new
index modes will be added in the future, so I'm keeping it
extensible, instead of e.g. creating --force-index.
Similar to previous commits.
This also renames --doubleclick-time to --input-doubleclick-time, and
--key-fifo-size to --input-key-fifo-size. We could keep the old names,
but these options are very obscure, and renaming them seems better for
consistency.
Additionally to removing the global variables, this makes the options
more uniform. --ssf-... becomes --sws-..., and --sws becomes --sws-
scaler. For --sws-scaler, use choices instead of magic integer values.
Pretty much nothing changes, but using -tv-scan with suboptions doesn't
work anymore (instead of "-tv-scan x" it's "-tv scan-x" now). Flat
options ("-tv-scan-x") stay compatible.
Convert all these commands to properties. (Except tv_last_channel, not
sure what to do with this.) Also, internally, don't access stream
details directly, but dispatch commands with stream ctrls.
Many of the new properties are a bit strange, because they're write-
only. Also remove some OSD output these commands produced, because I
couldn't be bothered to port these.
In general, this makes everything much cleaner, and will also make it
easier to e.g. move the demuxer to its own thread.
Don't bother updating input.conf, but changes.rst documents how old
commands map to the new ones.
Mostly untested, due to lack of hardware.
Basically, this allows gapless playback with similar files (including
the ordered chapter case), while still being robust in general.
The implementation is quite simplistic on purpose, in order to avoid
all the weird corner cases that can occur when creating the filter
chain. The consequence is that it might do not-gapless playback in
more cases when needed, but if that bothers you, you still can use
the normal gapless mode.
Just using "--gapless-audio" or "--gapless-audio=yes" selects the old
mode.
(The old "force" choice of that option is renamed to "force-default".)
This allows overriding native ASS script subtitle styles with the style
provided by the --sub-text-* options (like --sub-text-font etc.). This
is disabled by default, and needs to be explicitly enabled with the
--ass-style-override=force option and input property.
This uses in fact exactly the same options (--sub-text-*) and semantics
as the ones used to configure unstyled text subtitles.
It's recommended to combine this with this in the mpv config file:
ass-force-style="ScaledBorderAndShadow=1" # work around dumb libass behavior
Also, adding a key binding to toggle this behavior should be added,
because overriding can easily break:
L cycle ass-style-override
This would cycle override behavior on Shift+L and allows quickly
disabling/enabling style overrides.
Note: ASS should be considered a vector format rather than a subtitle
format. There is no easy or reliable way to determine whether the style
of a given subtitle event can be changed without destroying visuals or
not. This patch relies on a simple heuristic, which often works and
often breaks.
This simply writes the file name as a comment to the top of the watch later
config file.
It can be useful to the user for determining whether a watch later config file
can be manually removed (e.g. in case the corresponding media file has been
deleted) or not.
If a single person complains, I will readd it. But I don't expect that
this will happen.
The main reason for removing this is that it's some of the most unclean
code remaining, it's unmaintained, and I've never ever heard of someone
using it.
Commit e2e450f9 started making use of luaL_register(), but OF COURSE
this function disappeared in Lua 5.2, and was replaced with a 5.2-only
alternative, slightly different mechanism.
So just NIH our own function. This is actually slightly more correct,
since it forces the user to call "require" to actually make the module
visible for builtin C-only modules other than "mp". Fix autoload.lua
accordingly.
We need this only because Lua's stdlib is so scarce. Lua doesn't intend
to include a complete stdlib - they confine themselves to standard C,
both for portability reasons and to keep the code minimal. But standard
C does not provide much either.
It would be possible to use Lua POSIX wrapper libraries, but that would
be a messy (and unobvious) dependency. It's better to implement the
missing functions ourselves, as long as they're small in number.
stream.start_pos was needed for optical media only, and (apparently) not
for very good reasons. Just get rid of it.
For stream_dvd, we don't need to do anything. Byte seeking was already
removed from it earlier.
For stream_cdda and stream_vcd, emulate the start_pos by offsetting the
stream pos as seen by the rest of mpv.
The bits in discnav.c and loadfile.c were for dealing with the code
seeking back to the start in demux.c. Handle this differently by
assuming the demuxer is always initialized with the stream at start
position, and instead seek back if initializing the demuxer fails.
Remove the --sb option, which worked by modifying stream.start_pos. If
someone really wants this option, it could be added back by creating a
"slice" stream (actually ffmpeg already has such a thing).
The quit command has an optional argument that is used as exit code.
Extend that to the quit_watch_later command. Actually, unify the
implementations of the two commands.
Requested in #798.
Some options change from percentages to number of kilobytes; there are
no cache options using percentages anymore.
Raise the default values. The cache is now 25000 kilobytes, although if
your connection is slow enough, the maximum is probably never reached.
(Although all the memory will still be used as seekback-cache.)
Remove the separate --audio-file-cache option, and use the cache default
settings for it.
Try to get the "new" code path (using NetWM/EWMH) free of hacks done for
the sake of old WMs or the no-WM case.
Implement --fs-screen using _NET_WM_FULLSCREEN_MONITORS.
VapourSynth won't just filter multiple frames at once on its own. You
have to request multiple frames at once manually. This is what this
commit introduces: a sub-option controls how many frames will be
requested at once. This also changes the semantics of the maxbuffer sub-
option, now renamed to buffered-frames.
The situation has changed a bit since the days of mplayer2, so we can
use more/less diplomatic wording. Merge the two sections listing
changes from MPlayer and mplayer2. Mention the client API and Lua
scripting as alternatives to slave mode.
I'm calling MPlayer code "horrible". This is not meant as an offense,
but after turning around almost every line of MPlayer code, I believe
I have a right to say this. Sorry. I would say that MPlayer has a
surprisingly sane and simple architecture (for what it is), but much
of it drowned under a load of evil hacks or not-cleaned-up-yet code.
These are now equivalent to combining commands with the "cycle pause" or
"set pause" commands, and thus are not needed anymore. They were also
obscure and undocumented.
The many "boxes" in this entry were causing rst2pdf to fail because it
couldn't figure out where to break the page. Make the boxes smaller by
removing semi-redundant examples. Also try and make surrounding text a
little shorter by rewording.
This is done after filters, so things like framerate-doubling
deinterlacing is accounted for.
Unfortunately, framedropping can cause inaccuracies (especially after
precise seeks), and we can't really know when that happens. Even though
we know that the decoder might drop a frame if we request it to do so,
we don't know when the dropped frame will start or stop affecting the
video filter chain. Video filters can have frames buffered, and we
can't tell at which point the dropped frame would have been output.
It's not even possible to mark a discontinuity after seek, because
again we don't know if the filter chain still has the discontinuity
within its buffers.
So we have to live with the fact that the output of this property can
be completely broken after seek, unless --no-hr-seek-framedrop is used.
This allows disabling of decoder framedrop during hr-seek.
It's basically another useless option, but it will help exploring
whether this framedropping really makes seeking faster, or whether
disabling it helps with precise seeking (especially frame backstepping).
Also remove MSGL_SMODE and friends.
Note: The indent in options.rst was added to work around a bug in
ReportLab that causes the PDF manual build to fail.
This affects the return value of mp.script_name, the "client name"
(what's returned by mpv_client_name()) and all associated features, as
well as the mpv terminal output module prefix when scripts print
something.
As discussed in #748.
Set _DurationNum/_DurationDen on each VS frame, instead of
_AbsoluteTime. The duration is the difference between the timestamp of
the frame and the next frame, and when receiving filtered VS frames, we
convert them back to an absolute PTS by summing them.
We pass the timestamps with microsecond resolution. mpv uses double for
timestamps internally, so we don't know the "real" timebase or FPS. VS
on the other hand uses fractions for frame durations. We can't pass
through the numbers exactly, but microseconds ought to be enough to be
even safe from accumulating rounding errors.
This allows client API users and Lua scripts to side-step the pretty
horrible video filter string "language" (although it's back and can't be
avoided when using libavfilter).
This couldn't rotate by 180°. Add this, and also make the parameter in
degrees, instead of magic numbers.
For now, drop the flipping stuff. You can still flip with --vf=flip or
--vf=mirror. Drop the landscape/portrait stuff - I think this is
something almost nobody will use. If it turns out that we need some of
these things, they can be readded later.
Make it use libavfilter. Its vf_transpose implementation looks pretty
simple, except that it uses slice threading and should be much faster.
Often, user configs set options that are not suitable for encoding.
Usually, playback and encoding are pretty different things, so it makes
sense to keep them strictly separate. There are several possible
solutions. The approach taken by this commit is to basically ignore the
default config settings, and switch to an [encoding] config profile
section instead. This also makes it impossible to have --o in a config
file, because --o enables encode mode.
See github issue #727 for discussion.
This is for the sake of multi-key combinations (see github issue #718).
Now a multi-key sequence isn't matched if any of the previous keys were
actually mapped.
The window close button is usually mapped to the CLOSE_WIN pseudo-key.
Until now, --input-test treated this pseudo-key like any other key (like
the rest of the input handling code), so you couldn't close the window
in this mode. The manpage had silly instructions and warnings how to
deal with this.
Just always quit when CLOSE_WIN is received, and improve the
instructions.
The input code always supported combinations of multiple keys (even in
MPlayer, although there the code was active really only for mouse
buttons). This was arcance and also made the code more complicated. I
only know of a single person who ever made use of this feature.
Remove this feature, and repurpose some of the support code (e.g.
parsing, display of key combinations, etc.) to handle such multi-
combinations as sequences, instead of keys to be pressed at the same
time. This is much simpler and implements the feature requested in
github issue #718.
This commit will probably cause a bunch of regressions, since the input
handling code has some weird corner cases. I couldn't find any problems
when testing, though.
This collects statistics and other things. The option dumps raw data
into a file. A script to visualize this data is included too.
Litter some of the player code with calls that generate these
statistics.
In general, this will be helpful to debug timing dependent issues, such
as A/V sync problems. Normally, one could argue that this is the task of
a real profiler, but then we'd have a hard time to include extra
information like audio/video PTS differences. We could also just
hardcode all statistics collection and processing in the player code,
but then we'd end up with something like mplayer's status line, which
was cluttered and required a centralized approach (i.e. getting the data
to the status line; so it was all in mplayer.c). Some players can
visualize such statistics on OSD, but that sounds even more complicated.
So the approach added with this commit sounds sensible.
The stats-conv.py script is rather primitive at the moment and its
output is semi-ugly. It uses matplotlib, so it could probably be
extended to do a lot, so it's not a dead-end.
And slightly adjust the semantics of MPV_EVENT_PAUSE/MPV_EVENT_UNPAUSE.
The real pause state can now be queried with the "core-idle" property,
the user pause state with the "pause" property, whether the player is
paused due to cache with "paused-for-cache", and the keep open event can
be guessed with the "eof-reached" property.
This property is set to "yes" if playback was paused due to --keep-open.
The change notification might not always be perfect; maybe that should
be improved.
Currently this is (probably) equivalent to "paused-for-cache", but the
latter is a bit special, while this new property is a bit more general.
One case where they might actually be different is dvdnav menus, but I
haven't checked.
Also add property change notifications for these two properties.
This re-allows the previous behaviour of being able to reencode with
metadata removed, which is useful when encoding "inconsistently" tagged
data for a device/player that shows file names when tags are not
present.
Before this commit, the filter attempted to keep the vsscript state
(p->se) even when the script was reloaded. Change it to destroy the
script state too on reloading. Now no workaround for LoadPlugin is
necessary, and this also fixes a weird theoretical race condition when
destroying and recreating the mpv source filter.
This is a read-only property that uses VFCTRL_GET_METADATA
to retrieve mp_tags metadata from a filter specified by label
Signed-off-by: wm4 <wm4@nowhere>
This is needed if you want to reimplement the status line in lua
I could only test drop-frame-count because I didn't find an easy way to
trigger paused-for-cache and total-avsync-change
Signed-off-by: wm4 <wm4@nowhere>
Mainly meant to apply simple VapourSynth filters to video at runtime.
This has various restrictions, which are listed in the manpage.
Additionally, this actually copies video frames when converting frame
references from mpv to VapourSynth, and a second time when going from
VapourSynth to mpv. This is inefficient and could probably be easily
improved. But for now, this is simpler, and in fact I'm not sure if
we even can references VapourSynth frames after the core has been
destroyed.
The only tricky part is keeping the cache contents, which is made simple
by allocating the new cache while still keeping the old cache around,
and then copying the old data.
To explain the "Don't use this when playing DVD or Bluray." comment: the
cache also associates timestamps to blocks of bytes, but throws away the
timestamps on seek. Thus you will experience strange behavior after
resizing the cache until the old cached region is exhausted.
Now they can be paused and resumed.
Since pausing and disabling the timer is essentially the same underlying
operation, we also just provide one method for it.
mp.cancel_timer probably still works, but I'm considering this
deprecated, and it's removed from the manpage. (We didn't have a release
with this function yet, so no formal deprecation.)
This commit adds support for automatic selection of color profiles based on
the display where mpv is initialized, and automatically changes the color
profile when display is changed or the profile itself is changed from
System Preferences.
@UliZappe was responsible with the testing and implementation of a lot of this
commit, including the original implementation of `cocoa_get_icc_profile_path`
(See #594).
Fixes#594
Change the type of the property from a string list (alternating
key/value entries) to a map. Using the client API, this will return
MPV_FORMAT_NODE_MAP, while Lua mp.get_property_native returns a
dictionary-like table.
Change script_message to broadcast the message to all clients. Add a new
script_message_to command, which does what the old script_message
command did.
This is intended as simplification, although it might lead to chaos too.
They're strictly DVD-only, so it's better to mark them as such. This
also documentes the "title" (now renamed to "dvd-title") property.
This also avoids collision with the --title option. (Technically, there
was no problem. But it might be confusing for users, since we have a
policy of naming properties and options the same if they refer to the
same underlying functionality.)
Maybe this should be default. On the other hand, this filter does
something even if the volume is neutral: it clips samples against the
allowed range, should the decoder or a previous filter output garbage.
This adds the options replaygain-track and replaygain-album. If either is set,
the replaygain track or album gain will be automatically read from the track
metadata and the volume adjusted accordingly.
This only supports reading REPLAYGAIN_(TRACK|ALBUM)_GAIN tags. Other formats
like LAME's info header would probably require support from libav.
This commit:
- Changes some of the #define and variable names for clarification and
adds comments where appropriate.
- Unifies :srgb and :icc-profile, making them fit into the same step of
the decoding process and removing the weird interactions between both
of them.
- Makes :icc-profile take precedence over :srgb (to significantly reduce
the number of confusing and useless special cases)
- Moves BT709 decompanding (approximate or actual) to the shader in all
cases, making it happen before upscaling (instead of the old 0.45
gamma function). This is the simpler and more proper way to do it.
- Enables the approx gamma function to work with :srgb as well due to
this (since they now share the gamma expansion code).
- Renames :icc-approx-gamma to :approx-gamma since it is no longer tied
to the ICC options or LittleCMS.
- Uses gamma 2.4 as input space for the actual 3DLUT, this is now a
pretty arbitrary factor but I picked 2.4 mainly because a higher pure
power value here seems to produce visually better results with wide
gamut profiles, rather then the previous 1.95 or BT.709.
- Adds the input gamma space to the 3dlut cache header in case we change
it more in the future, or even make it user customizable (though I
don't see why the latter would really be necessary).
- Fixes the OSD's gamma when using :srgb, which was previously still
using the old (0.45) approximation in all cases.
- Updates documentation on :srgb, it was still mentioning the old
behavior from circa a year ago.
This commit should serve to both open up and make the CMS/shader code much
more accessible and less confusing/error-prone and simultaneously also
improve the performance of 3DLUTs with wide gamut color spaces.
I would liked to have made it more modular but almost all of these
changes are interdependent, save for the documentation updates.
Note: Right now, the "3DLUT takes precedence over SRGB" logic is just
coded into gl_lcms.c's compile_shaders function. Ideally, this should be
done earlier, when parsing the options (by overriding the actual
opts.srgb flag) and output a warning to the user.
Note: I'm not sure how well this works together with real-world
subtitles that may need to be color corrected as well. I'm not sure
whether :approx-gamma needs to apply to subtitles as well. I'll need to
test this on proper files later.
Note: As of now, linear light scaling is still intrinsically tied to
either :srgb or :icc-profile. It would be thinkable to have this as an
extra option, :linear-scaling or similar, that could be used with or
without the two color management options.
This removes the ringbuffer management from the code, and uses the
generic code added with the previous commit. The result should be
pretty much the same.
The "estimate" sub-option goes away. This estimation is now always
active. The new code for delay estimation is slightly different, and
follows the claim of the jack framework that callbacks are timed
exactly.
--ass-style-override=force now attempts to override the 'Default' style.
May or may not work. In some situations it will work, but also mess up
seemingly unrelated things like signs typeset with ASS.
The previous version of the gamma suboption was pretty useless. It could
be used to disable delayed gamma enabling, which is a mechanism to avoid
having to adjust gamma in the shader by default.
Repurpose the suboption and allow setting an exact gamma value with it.
You can already override gamma with the --gamma option as well as the
gamma input property, but these use a weird curve to create the
impression of a linear perceived brightness change when changing the
value. This suboption now allows setting an exact gamma value.
This used to be absolute colorimetric, but relative colorimetric is a
saner default due to the arguments presented in issue #595.
A short summary: In general it doesn't affect much because our eyes
adapt to the white point either way, but if running in windowed mode it
would make the whites seem inconsistent/tinted. For fullscreen
projection it's also undesirable since it reduces the dynamic range
without much benefit (again, since our eyes adapt either way) and it
also breaks calibration against ambient lighting.
This shouldn't change much, since most profile types that aren't 3DLUTs
aren't capable of either of those transforms, and most displays are
calibrated against D65 (same as BT.709 source) either way.
Not sure about this... might redo.
At least this provides a case of a broadcasted event, which requires
per-event data allocation.
See github issue #576.
There are some complications because the client API distinguishes
between integers and floats, while Lua has only "numbers" (which are
usually floats). But I think this should work now.
This uses the value of 1.95 as an approximation for the exact gamma
curve, which replicates the behavior of popular video software including
anything in the Apple ecosystem, as per issue #534.
MP_CMD_COMMAND_LIST commands (used to implement key bindings with
multiple commands) were not checked for abort commands. Implement it.
Remove the remarks about multi-commands being special from the manpage.
Seek coalescing is handled differently now, and the issue with abort
commands is fixed with this commit.
The old way still works, and is fine to use. Still discourage it,
because it might conflict with other ways to access this property, such
as the one added in the next commit.
This is simply not important enough to warrant so much space, and it's
perhaps also very confusing.
Although I'm not fully sure, since this is about the only way that
allows a user to interact with a script, besides key bindings and static
options.
There was already an undocumented mechanism provided by
mp.set_key_bindings and other functions, but this was relatively
verbose, and also weird. It was mainly to make the OSC happy (including
being efficient and supporting weird corner cases), while the new
functions try to be a bit simpler.
This also provides a way to let users rebind script-provided commands.
(This mechanism is less efficient, because it's O(n^2) for n added key
bindings, but it shouldn't matter.)
Until now, the --no-config was explicitly checked in multiple places to
suppress loading of config files.
Add such a check to the config path code itself, and refuse to resolve
_any_ configuration file locations if the option is set.
osc.lua needs a small fixup, because it didn't handle the situation when
no path was returned. There may some of such cases in the C code too,
but I didn't find any on a quick look.
Instead, chain them.
Note that there's no logic to prevent the other event handlers to be run
from an event handler (like it's popular in GUI toolkits), because I
think that's not very useful for this purpose.
Use a list instead of a table. This makes it easier to provide extended
information about a property, and doesn't require you to fiddle with rhe
RST ASCII-art tables.
Also, extend some property descriptions.
Use of these is "discouraged", but they're there to select these special
cases with the "aspect" property. They really should use some sort of
choice option type, but since it would be some work to make these work
with float values, the simple and dumb alternative was picked.
Try to make it more intuitive by not requiring hex values. The new way
uses float values in the range 0.0-1.0, separated by '/' (':' was
suggested, but that wouldn't allow color options in sub-options).
Example: --osd-color=1.0/0.0/0.0/0.75
Using the range 0.0-1.0 has the advantage that it could be easily
extended to colors beyond 8 bit.
Details see manpage.
Suggestions for alternative syntax or value ranges are welcome, but be
quick with it.
The values set by this new option can be queried by Lua scripts using
the mp.getopt() function. The function takes a string parameter, and
returns the value of the first key that matches. If no key matches, nil
is returned.
The terminal OSD code includes the handling of the terminal status line,
showing player OSD messages on the terminal, and showing subtitles on
terminal (the latter two only if there is no video window, or if
terminal OSD is forced).
This didn't handle some corner cases correctly. For example, showing an
OSD message on the terminal always cleared the previous line, even if
the line was an important message (or even just the command prompt, if
most other messages were silenced).
Attempt to handle this correctly by keeping track of how many lines the
terminal OSD currently consists of. Since there could be race conditions
with other messages being printed, implement this in msg.c. Now msg.c
expects that MSGL_STATUS messages rewrite the status line, so the caller
is forced to use a single mp_msg() call to set the status line.
Instead of littering print_status() all over the place, update the
status only once per playloop iteration in update_osd_msg(). In audio-
only mode, the status line might now be a little bit off, but it's
perhaps ok.
Print the status line only if it has changed, or if another message was
printed. This might help with extremely slow terminals, although in
audio+video mode, it'll still be updated very often (A-V sync display
changes on every frame).
Instead of hardcoding the terminal sequences, use
terminfo/termcap to get the sequences. Remove the --term-osd-esc option,
which allowed to override the hardcoded escapes - it's useless now.
The fallback for terminals with no escape sequences for moving the
cursor and clearing a line is removed. This somewhat breaks status line
display on these terminals, including the MS Windows console: instead of
querying the terminal size and clearing the line manually by padding the
output with spaces, the line is simply not cleared. I don't expect this
to be a problem on UNIX, and on MS Windows we could emulate escape
sequences. Note that terminal OSD (other than the status line) was
broken anyway on these terminals.
In osd.c, the function get_term_width() is not used anymore, so remove
it. To remind us that the MS Windows console apparently adds a line
break when writint the last column, adjust screen_width in terminal-
win.c accordingly.
Doesn't make any sense anymore. X11 (which was mentioned in the manpage)
autodetects it, and everything else ignored the option values.
Since for incomprehensible reasons the backends and vo.c still need to
exchange information about the screensize using the option fields,
they're not removed yet.
This basically reverts the default as set by commit 812798c5. This seems
to be a matter of taste, but personally I think keeping the pause
setting is better.
This finally gets rid of the LaTeX dependency.
We should actually be using docultils directly here, but I didn't
do this because of all the potential Python 2/3 breakage.
1000ms is a bit insane. It makes behavior on playback speed changes
worse (because the player has to catch up the dropped audio due to
audio-chain reset), and perhaps makes seeking slower.
Note that the problem of playback speed changes misbehaving will be
fixed in the future, but even then we don't want to have a buffer that
large.
Set the flag CODEC_FLAG_OUTPUT_CORRUPT by default. Note that there is
also CODEC_FLAG2_SHOW_ALL, which is older, but this seems to be ffmpeg
only.
Note that whether you want this enabled depends on the user. Some might
prefer that only good frames are output, while others want the decoder
to try as hard as possible to output _anything_. Since mplayer/mpv is
rather the kind of player that tries hard instead of being "clever", set
the new default to override libavcodec's default.
A nice way to test this is switching video tracks. Since mpv doesn't
wait for the next key frame, it'll start feeding the decoder with a
packet from the middle of the stream.
This is relatively hacky, but it's Christmas, so it's ok. This does two
things: 1. allow selecting two subtitle tracks, and 2. include a hack
that renders the second subtitle always as toptitle. See manpage
additions how to use this.
Basically, reimplement --msglevel. Instead of making the new msg code
use the legacy code, make the legacy code use the reimplemented
functionality.
The handling of the deprecated --identify switch changes. It temporarily
stops working; this will be fixed in later commits.
The actual sub-options syntax (like --msglevel-vo=...) goes away, but I
bet nobody knew about this or used this anyway.
Remove these because I'm too lazy to convert them to proper
STREAM_CTRLs. Considering that probably nobody uses radio://, caring
about this is a complete waste of time. I will add these commands back
if someone asks for them, but I don't expect this to happen.
"-" could skip optional arguments. I think this was a pretty bad idea,
because it introduced a weird special case.
I'll remove the special syntax, but keep compatibility for the "seek"
and "screenshot" commands.