This uses a different method to piece segments together. The old
approach basically changes to a new file (with a new start offset) any
time a segment ends. This meant waiting for audio/video end on segment
end, and then changing to the new segment all at once. It had a very
weird impact on the playback core, and some things (like truly gapless
segment transitions, or frame backstepping) just didn't work.
The new approach adds the demux_timeline pseudo-demuxer, which presents
an uniform packet stream from the many segments. This is pretty similar
to how ordered chapters are implemented everywhere else. It also reminds
of the FFmpeg concat pseudo-demuxer.
The "pure" version of this approach doesn't work though. Segments can
actually have different codec configurations (different extradata), and
subtitles are most likely broken too. (Subtitles have multiple corner
cases which break the pure stream-concatenation approach completely.)
To counter this, we do two things:
- Reinit the decoder with each segment. We go as far as allowing
concatenating files with completely different codecs for the sake
of EDL (which also uses the timeline infrastructure). A "lighter"
approach would try to make use of decoder mechanism to update e.g.
the extradata, but that seems fragile.
- Clip decoded data to segment boundaries. This is equivalent to
normal playback core mechanisms like hr-seek, but now the playback
core doesn't need to care about these things.
These two mechanisms are equivalent to what happened in the old
implementation, except they don't happen in the playback core anymore.
In other words, the playback core is completely relieved from timeline
implementation details. (Which honestly is exactly what I'm trying to
do here. I don't think ordered chapter behavior deserves improvement,
even if it's bad - but I want to get it out from the playback core.)
There is code duplication between audio and video decoder common code.
This is awful and could be shareable - but this will happen later.
Note that the audio path has some code to clip audio frames for the
purpose of codec preroll/gapless handling, but it's not shared as
sharing it would cause more pain than it would help.
Slightly helps with timeline stuff, like EDL. There is no need to keep
network (or even just disk I/O) busy for all segments at the same time,
because 1. the data won't be needed any time soon, and 2. will probably
be discarded anyway if the stream is seeked when segment is resumed.
Partially fixes#2692.
This is mainly a refactor. I'm hoping it will make some things easier
in the future due to cleanly separating codec metadata and stream
metadata.
Also, declare that the "codec" field can not be NULL anymore. demux.c
will set it to "" if it's NULL when added. This gets rid of a corner
case everything had to handle, but which rarely happened.
This slightly changes behavior when seeking with external audio/subtitle
tracks if transport streams and mpeg files are played, as well as
behavior when seeking with such external tracks.
get_main_demux_pts() is evil because it always blocks on the demuxer (if
there isn't already a packet queued). Thus it could lock up the player,
which is a shame because all other possible causes have been removed.
The reduced "precision" when seeking in the ts/mpeg cases (where
SEEK_FACTOR is used, resulting in byte seeks instead of timestamp seeks)
might lead to issues. We should probably drop this heuristic. (It was
introduced because there is no other way to seek in files with PTS
resets with libavformat, but its value is still questionable.)
Slightly change how it is decided when a new packet should be read.
Switch to demux_read_packet_async(), and let the player "wait properly"
until required subtitle packets arrive, instead of blocking everything.
Move distinguishing the cases of passive and active reading into the
demuxer, where it belongs.
The demuxer infrastructure was originally single-threaded. To make it
suitable for multithreading (specifically, demuxing and decoding on
separate threads), some sort of tripple-buffering was introduced. There
are separate "struct demuxer" allocations. The demuxer thread sets the
state on d_thread. If anything changes, the state is copied to d_buffer
(the copy is protected by a lock), and the decoder thread is notified.
Then the decoder thread copies the state from d_buffer to d_user (again
while holding a lock). This avoids the need for locking in the
demuxer/decoder code itself (only demux.c needs an internal, "invisible"
lock.)
Remove the streams/num_streams fields from this tripple-buffering
schema. Move them to the internal struct, and protect them with the
internal lock. Use accessors for read access outside of demux.c.
Other than replacing all field accesses with accessors, this separates
allocating and adding sh_streams. This is needed to avoid race
conditions. Before this change, this was awkwardly handled by first
initializing the sh_stream, and then sending a stream change event. Now
the stream is allocated, then initialized, and then declared as
immutable and added (at which point it becomes visible to the decoder
thread immediately).
This change is useful for PR #2626. And eventually, we should probably
get entirely of the tripple buffering, and this makes a nice first step.
All of these are supported by FFmpeg now. It was disabled by default
too (with FFmpeg).
If compiled against Libav, mpv will lose the ability to read some
subtitle formats (but the most important ones, srt and ass, still should
work).
Most of this is explained in the DOCS additions.
This gives us slightly more sanity, because there is less interaction
between the various parts. The goal is getting rid of the video_offset
entirely.
The simplification extends to the user API. In particular, we don't need
to fix missing parts in the API, such as the lack for a seek command
that seeks relatively to the start time. All these things are now
transparent.
(If someone really wants to know the real timestamps/start time, new
properties would have to be added.)
This loaded external .ass files via libass. libavformat's .ass reader is
now good enough, so use that instead.
Apparently libavformat still doesn't support fonts embedded into text
.ass files, but support for this has been accidentally broken in mpv for
a while anyway. (And only 1 person complained.)
This makes the bitrate properties unavailable, instead of
returning 0 when:
1. No track is selected, or
2. Not enough packets have been read to have a bitrate estimate yet
Make handling of metadata slightly more generic, and add reading of the
"PERFORMER" fields. There are some more fields, but for now let's leave
it at this.
TRACK-specific PERFORMER fields have to be read from the per-chapter
metadata (somewhat obscure).
Fixes#2328.
This works similar to the existing .rar support, but uses libarchive.
libarchive supports a number of formats, including zip and (most of)
rar.
Unfortunately, seeking does not work too well. Most libarchive readers
do not support seeking, so it's emulated by skipping data until the
target position. On backwards seek, the file is reopened. This works
fine on a local machine (and if the file is not too large), but will
perform not so well over network connection.
This is disabled by default for now. One reason is that we try
libarchive on every file we open, before trying libavformat, and I'm not
sure if I trust libarchive that much yet. Another reason is that this
breaks multivolume rar support. While libarchive supports seeking in
rar, and (probably) supports multivolume archive, our support of
libarchive (probably) does not. I don't care about multivolume rar, but
vocal users do.
Instead, force everyone to use the metadata struct and set a "title"
field. This is only a problem for the timeline producers, which set up
chapters manually. (They do this because a timeline is a separate
struct.)
This fixes the behavior of the chapter-metadata property, which never
returned a "title" property for e.g. ordered chapters.
Add --demuxer-max-packets and --demuxer-max-bytes, which control the
maximum size of the packet queue. These can be helpful to avoid
excessive memory usage.
Memory usage is the reason why there's a limit in the first place. If a
file is more or less broken, and audio and video don't line up, the
decoders will fill up the packet queue trying to read more audio or
video, and the maximum sizes are required to avoid unbounded memory
allocation. Being able to override the maximum sizes is useful; either
for restricting memory usage further, or enlarging the sizes when
attempting to play various broken files.
Remove --demuxer-readahead-packets and --demuxer-readahead-bytes. These
were a bit useless. They could force a minimum packet queue size, but
controlling the queue size with --demuxer-readahead-secs is much nicer.
It's fairly certain nobody ever used these options.
Instead of opening a stream and then a demuxer, do both at once with
demux_open_url().
This requires some awkward additions to demuxer_params, because there
are some weird features associated with opening the main file. E.g. the
relatively useless --stream-capture features requires enabling capturing
on the stream before the demuxer is opened, but on the other hand
shouldn't be done on secondary files like external subtitles.
Also relatively bad: since demux_open_url() returns just a demuxer
pointer or NULL, additional error reporting is done via demuxer_params.
Still, at least conceptually, it's ok, and simpler than before.
Nobody wanted to restore this, so it gets the boot.
If anyone still wants to volunteer to restore menu support, this would
be welcome. (I might even try it myself if I feel masochistic and like
wasting a lot of time for nothing.) But if it does get restored, it
should be done differently. There were many stupid things about how it
was done. For example, it somehow tried to pull mp_nav_events through
all the layers (including needing to "buffer" them in the demuxer),
which was needlessly complicated. It could be done simpler.
This code was already inactive, so this commit actually changes nothing.
Also keep in mind that normal DVD/BD playback still works.
Until now, if a stream wasn't seekable, but the stream cache was enabled
(--cache), we've enabled seeking anyway. The idea was that at least
short seeks would typically fall within the cache. And if not, the user
was out of luck and terrible things happened. In other words, it was
unreliable.
Be stricter about it and remove this behavior. Effectively, this will
for example disable seeking in piped data.
Instead of trying to be clever, add an --force-seekable option, which
will always enable seeking if the user really wants it.
This reads the "CUESHEET" tag, and attempts to parse it as .cue data. If
any is found, the cue tracks are added as chapters.
This reuses the parser written for demux_cue.c.
Fixes#1957.
The options don't change, but they're now declared and used privately by
demux_mkv.c. This also brings with it a minor refactor of the subpreroll
seek handling - merge the code from playloop.c into demux_mkv.c. The
change in demux.c is pretty much equivalent as well.
On EOF, this stopped reporting the actual cache duration, and just
signalled unknown duration. Fix this and keep reporting whatever is left
in the packet queue.
This reverts commit 5438a8b3. The commit doesn't give a good explanation
as to why it is needed, but I guess it was because the reporting was
imperfect (it switched between unknown or 0, and the correct duration).
This also removes a line added in commit 848546f2. The line is
ds->active = false;
The "active" flag basically says that data from this stream is actively
needed, and it's used to calculate the minimum data that can actually be
played (approximately). If this were ignored, a sparse subtitle stream
would set the cache duration to 0s. The commit message adding the line
says "actually does nothing, but in theory it's cleaner". Well, screw
it.
With a recent cleanup, rar support was stuffed into demux_playlist.c
(because "opening" rar files pretty much just lists archive contents and
adds them to a playlist using a special rar:// protocol, which will
actually access the rar file contents).
Since demux_playlist.c is probed _after_ demux_lavf.c (and should/must
be), libavformat was given the chance to detect DTS streams embedded
within the rar file. This is not really what we want, and a regression
what happened before rar listing was moved to demux_playlist.c.
Fix it by moving the rar listing into its own pseudo-demuxer, and let ir
probe before demux_lavf.c.
(Yes, this feature still has users.)
Check async abort notification. libavformat already do something
equivalent.
Before this commit, the demuxer could enter resync mode (and print silly
warning messages) when the stream stopped returning data because of an
abort.
Includes some logic for not starting the demuxer thread for fully read
subtitles. (Well, the cache will still waste _lots_ of resources, and
the cache always has to be created, because we don't know whether it'll
be needed _before_ opening the file.)
See #1597.
The Matroska timeline code was the only thing which still used the
demuxer.type field. This field explicitly identifies a demuxer
implementation. The purpose of the Matroska timeline code was to reject
files that are not Matroska. But it already forces the Matroska format,
meaning loading will explicitly only use the Matroska demuxer. If the
demuxer can't open the file, no other demuxer will be tried, and thus
checking the field is redundant.
The change in demux_mkv_timeline.c removes the if condition, and
unindents the if body.
