Before this, we merely printed a message to the terminal. Now the API
user can determine this properly. This might be important for API users
which somehow maintain complex state, which all has to be invalidated if
(state-changing) events are missing due to an overflow.
This also forces the client API user to empty the event queue, which is
good, because otherwise the event queue would reach the "filled up"
state immediately again due to further asynchronous events being added
to the queue.
Also add some minor improvements to mpv_wait_event() documentation, and
some other minor cosmetic changes.
Fixes#1472.
(Maybe these options should have been named --autofit-max and
--autofit-min, but since --autofit-larger already exists, use
--autofit-smaller for symmetry.)
The "\\" escape was rendered as "\" on the website. I'm hoping quoting
this in ``...`` will render it correctly.
Also add an example for show_text, which awkwardly does not require
escaping the "\".
After finding out more about how video mastering is done in the real
world it dawned upon me why the "hack" we figured out in #534 looks so
much better.
Since mastering studios have historically been using only CRTs, the
practice adopted for backwards compatibility was to simulate CRT
responses even on modern digital monitors, a practice so ubiquitous that
the ITU-R formalized it in R-Rec BT.1886 to be precisely gamma 2.40.
As such, we finally have enough proof to get rid of the option
altogether and just always do that.
The value 1.961 is a rounded version of my experimentally obtained
approximation of the BT.709 curve, which resulted in a value of around
1.9610336. This is the closest average match to the source brightness
while preserving the nonlinear response of the BT.1886 ideal monitor.
For playback in dark environments, it's expected that the gamma shift
should be reproduced by a user controlled setting, up to a maximum of
1.224 (2.4/1.961) for a pitch black environment.
More information:
https://developer.apple.com/library/mac/technotes/tn2257/_index.html
The Qt example already does this. I hoped this was restricted to
QApplication only, but apparently Qt repeated this mistake with
QGuiApplication (QGuiApplication was specifically added for QtQuick at a
much later point, even though QApplication inherits from it).
Seems to work with GtkSocket and passing the gtk_socket_get_id() value
via "wid" option to mpv.
One caveat is that using <tab> to move input focus from mpv to GTK does
not work. It seems we would have to interpret <tab> ourselves in this
case. I'm not sure if we really should do this - it would probably
require emulating some other typical conventions too. I'm not sure if an
embedder could do something about this on the toolkit level, but in
theory it would be possible, so leave it as is for now.
Remove the "all" special-behavior, and instead interpret trailing "*"
characters. --display-tags=all is replaced by --display-tags=* as a
special-case of the new behavior.
See #1404.
Note that the most straight-forward value for matchlen in the normal
case would be INT_MAX, because it should be using the entire string.
I used keylen+1 instead, because glibc seems to handle this case
incorrectly:
snprintf(buf, sizeof(buf), "%.*s", INT_MAX, "hello");
The result is empty, instead of just containing the string argument.
This might be a glibc bug; it works with other libcs (even MinGW-w64).
Make their meaning more exact, and don't pretend that there's a
reasonable definition for "bits-per-pixel". Also make unset fields
unavailable.
average_depth still might be inconsistent: for example, 10 bit 4:2:0 is
identified as 24 bits, but RGB 4:4:4 as 12 bits. So YUV formats
seemingly drop the per-component padding, while RGB formats do not.
Internally it's consistent though: 10 bit YUV components are read as
16 bit, and the padding must be 0 (it's basically like an odd fixed-
point representation, rather than a bitfield).
bpp(bits-per-pixel) and depth(bit-depth for color component) can
be calculated from pixelformat technically but it requires massive
informations to be implemented in client side.
These subproperties are provided for convenience.
We still keep the window pointer, because we want to call
QQuickWindow::resetOpenGLState() (which runs on the rendering thread
only). Interesting mess...
This avoids issues when upscaling directly in linear light, and is the
recommended way to upscale images according to imagemagick.
The default slope of 6.5 offers a reasonable compromise between
ringing artifacts eliminated and ringing artifacts introduced by
sigmoid-upscaling. Same goes for the default center of 0.75.
The previous implementation of opengl-cb kept only latest flipped frame.
This can cause massive frame drops because rendering is done asynchronously
and only the latest frame can be rendered.
This commit introduces frame queue and releated options to opengl-cb.
frame-queue-size: the maximum size of frame queue (1-100, default: 1)
frame-drop-mode: behavior when frame queue is full (pop, clear, default: pop)
The frame queue holds delayed frames and drops frames if the frame queue is
overflowed with next method:
'pop' mode: drops all the oldest frames overflown.
'clear' mode: drops all frames in queue and clear it.
With default options(frame-queue-size=1:frame-drop-mode=pop),
opengl-cb behaves in the same way as previous implementation effectively.
For frame-queue-size > 1, opengl-cb tries to calls update() without waiting
next flip_page() in order to consume queued frames.
Signed-off-by: wm4 <wm4@nowhere>
mpv can be built natively on a Windows machine using MSYS2. Add detailed
instructions on how to build and merge them with the existing
instructions for cross-compilation.
This one avoids use of a FBO. It's less flexible, because it uses works
around the whole QML rendering API. It seems to be the only way to get
OpenGL rendering without any indirections, though.
Parts of this example were insipired by Qt's "Squircle" example.
Also add a README file with a short description of each example, to
reduce the initial confusing.
This used to be required to workaround PulseAudio bugs. Even later, when
the bugs were (partially?) fixed in PulseAudio, I had the feeling the
hacks gave better behavior. On the other hand, I couldn't actually
reproduce any bad behavior without the hacks lately. On top of this, it
seems our hacks sometimes perform much worse than PulseAudio's native
implementation (see #1430).
So disable the hacks by default, but still leave the code and the option
in case it still helps somewhere. Also, being able to blame PulseAudio's
code by using its native API is much easier than trying to debug our own
(mplayer2-derived) hacks.
Was already possible before by injecting the magic PID
8192 into channels.conf, the flag makes this much more
useable and we also have it documented.
Useful not only for debugging, but also for incomplete
channels.conf (mplayer format...), multi-channel
recording, or channels which do dynamic PID switchng.
full-transponder is also useful for channels which switch PIDs on-the-fly.
ffmpeg can handle this, but it needs the full stream with all PIDs.
--sub-scale-by-window=no attempts to keep subs always at the same pixel
size.
The implementation is a bit all over the place, because it compensates
already done scaling by an inverse scale factor, but it will probably do
its job.
Fixes#1424. (The semantics and name of --sub-scale-with-window are
kept, and this adds a new option - the name is confusingly similar, but
it's actually analogue to --osd-scale-by-window.)
This adds an "auto" choice to the concurrent-frames suboption, and makes
it the default.
I'm not so sure about making this the default, though. It could lead to
excessive buffering with large CPU counts. But we'll see.
Options which take colors accept two variants. The first is "r/g/b/a",
the second is "#AARRGGBB". Since they put alpha at different places,
it's probably better to document the second variant explicitly. (It's a
bit strange that they put alpha in different places, but on the other
hand, it's kind of natural. The second variant should probably be
considered deprecated.)
This is basically a hack; but apparently a needed one, since many
vapoursynth filters insist on having a FPS set.
We need to apply the FPS override before creating the filters. Also
change some terminal output related to the FPS value.
While there's no actual need to get rid of these, I want to make sure
nobody actually needs this stuff, and removing it is the best way to
get to know this. We still can revert this commit if it turns out there
is a significant need for this stuff.
The final goal is removing vo_opengl_old entirely. Add a warning, which
basically announces this intention.
The examples simple.c and cocoabasic.m can be compiled without
installing libmpv. But also, they didn't use the correct include path
libmpv programs normally use, so they couldn't be built with a properly
installed system-libmpv. That's pretty bad for examples, which are
supposed to show how to use libmpv correctly.
So do some bullshit that symlinks libmpv to a "mpv" include directory
under the build directory. This name-mismatch is a direct consequence of
the bullshit done in 499a6758 (requested in #539 for dumb reasons). (We
don't want to name the client API headers directory "mpv", because that
would be too unspecific, and clashes with having the mpv binary in the
same directory.)
If you have spaces or other "unusual" characters in your paths, the
build will break, because I couldn't find out where waf hides its
function to escape shell parameters (or a way to invoke programs
without involving the shell). Neither does such a thing to be
documented, nor do they seem to have a clear way to do this in
their code.
This also doesn't compile the Qt examples, because everything becomes
even more terrible from there on.
C++ is the worst language ever, and allows throwing any type, even if it
doesn't make sense. In this case, we were throwing char*, which the
runtime typically treats as opaque, instead of printing it as message if
such an exception was not caught.
Do so by using mp_subprocess(). Although this uses completely different
code on Unix too, you shouldn't notice a difference. A less ncie thing
is that this reserves an entire thread while the command is running
(which wastes some memory for stack, at least). But this is probably
still the simplest way, and the fork() trick is apparently not
implementable with posix_subprocess().
This may or may not be useful for client API users.
Fold this API extension into the previous API bump. The previous bump
was only yesterday, so it's ok.
Until now, calling mpv_opengl_cb_uninit_gl() at a "bad moment" could
make the whole thing to explode. The API user was asked to avoid such
situations by calling it only in "good moments". But this was probably a
bit too subtle and could easily be overlooked.
Integrate the approach the qml example uses directly into the
implementation. If the OpenGL context is to be unitialized, forcefully
disable video, and block until this is done.
Use queued signals instead of QEvent for the wakeup notification. This
is slightly nicer, and reduces the chance that the event (QEvent::User)
could clash with other code using the same event.
Also switch to modern connect() syntax.
