The code assumed that the value of the profile-restore field is
"default" for such profiles, but the C implementation is such
that the field is intentionally omitted in such case.
This resulted in incorrectly trying to restore such profiles. However,
there are no stored values with profile-restore=default, so it only
resulted in a harmless warning, but otherwise behaved correctly (i.e.
nothing is restored).
Fix the condition by taking into account that missing field means
"default", so that it doesn't try to restore in such case, and
avoid the warning.
This reverts commit 04f0b0abe4.
It's not a good idea to unify the names only for visibility, while
keeping secondary-* for everything else.
This needs a bit more thought before we allow secondary sub to be
visible on its own.
Adds --sub-visibility choices 'primary-only' for only displaying the
primary subtitle track, and 'secondary-only' for only displaying
secondary subtitle track.
Removes --secondary-sub-visibility and displays a message telling the
user to use --sub-visibility=yes/primary-only instead.
These changes make it so that the default 'sub-visibility' bind 'v'
cycles through all the 'sub-visibility' choices, 'no', 'yes',
'primary-only', and 'secondary-only'.
Was tripping -Wparantheses as the && after the || was not explicitly
wrapped. However, due to operator precedence the intended effect was
still correct.
This commit is mainly for correcting the previous commit message.
The previous commit fixed an issue where [un]registering events above
the first event ID "hole" is not requested from libmpv, and that's
indeed true.
However, this had nearly zero impact in practice, because libmpv
enables all events by default anyway (except TICK).
Therefore, above the first ID "hole" [un]register requests are not
sent to libmpv, and the events just keep arriving.
But the callback functions are still added/removed correctly (at
defaults.js), and so the script is not called back even if unregister
did not actually happen with libmpv.
The only event which was affected is TICK - which is not enabled by
default as it's deprecated, and before the previous commit could not
be enabled.
So the fix is more a general correctness fix now that the IDs array
can have "holes", but with effctively no impact in practice.
Commit 63205981 removed some events but left all other event IDs at
their original values, which created "holes" at the events IDs array.
The JS backend for mp.register_event maps a name to an ID by scanning
all IDs and stopping when the name was found or a NULL name was
returned. Lua does the same except that it doesn't stop on NULL name.
Previously it was not possible to have a NULL name before the end of
the array, but now it is possible due to the enumeration holes.
Fix by skipping missing names, like lua does.
Not all deprecated symbols were removed. Only three events were removed for now
since these are not used internally.
This bumps the library version to 2.0.
Allow --keep-open=always to work with --loop-playlist, where
before this patch it would work only on the last playthrough of the
playlist. This patch allows it to work on all playthroughs.
Fixes#9470.
Previously OSD was always displayed on {ch,pl}_{next,prev} left-click,
and seekbar-hover-chapter was always enabled and with fixed format.
Now it can be controlled with:
- chapters_osd, playlist_osd: yes/no (only affects left-click).
- chapter_fmt: lua string.format template, or "no" to disable.
Fixes#4675
youtube-dl and yt-dlp both support --sub-langs and --srt-lang in
addition to --sub-lang for defining languages of subtitles. This hook
only checked for sub-lang in --ytdl-raw-options and inserted --all-subs
in its absence.
Nearly all the code base correctly references the data as constant. But
a couple of instances - fix those.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
This seems to work on gcc, clang and mingw as-is, but I made it
conditional on __GNUC__ just in case, even though I can't figure out
which compilers we care about that don't export this define.
Also replace all instances of assert(0) in the code by MP_UNREACHABLE(),
which is a strict improvement.
The problem with the previous code - which used mp.get_user_path, is
that it returns a path even with --no-config, and even if the file
doesn't exist.
This is why we tested the "config" property, and also used
mp.utils.file_info to check that the file exists.
mp.find_config_file doesn't return a path with no-cofig and doesn't
return a path if the file doesn't exists. It's simpler and better.
Normally there was no issue, but when the code converted a deeply
nested table into an mpv node - it didn't ensure the stack has room.
Lua doesn't check stack overflow when invoking lua_push* functions,
and leaves this responsibility to the (c) user via lua_checkstack.
Normally that's not an issue because when a lua (or autofree) function
is called, it's guaranteed at least LUA_MINSTACK (20) pushes.
However, pushnode and makenode are recursive, and each iteration can
add few values at the stack (which are popped when the recursion
unwinds), so checkstack must be used on (recursive) entry.
pushnode already checked the stack, makenode did not.
This commit checks the stack at makenode as well. The value of 6
(stack places to reserve) is with some room to spare, and in pratice
each iteration needs 2-3 at most (pushnode also leaves room).
Example which could previously corrupt the stack:
utils.format_json({d1={d2={<8 more times>}}}
This uses makenode to convert the lua table into an mpv node which
the json writer uses as input, and if the depth is 10 or more then
corruption could occur. mp.command_native is also affected, as well as
any other mp/utils command which takes a lua table as input.
While at it, fix the error string which pushnode used (luaL_checkstack
uses the provided string with "Stack overflow (%s)", so the user
message only needs to be additional info).
The speedup is due to moving big part of the autofree runtime overhead
(new lua c closure) to happen once on init at af_pushcclosure, instead
of on every call. This also allows supporting upvalues trivially, even
if mpv doesn't use it currently, and is more consistent with lua APIs.
While x2 infrastructure speedup is meaningful - and similar between
lua 5.1/5.2/jit, in practice it's a much smaller improvement because
the autofree overhead is typically small compared to the "real" work
(the actual functionality, and talloc+free which is needed anyway).
So with this commit, fast functions improve more in percentage.
E.g. utils.parse_json("0") is relatively fast and is now about 25%
faster, while a slower call like mp.command_native("ignore") is now
about 10% faster than before. If we had mp.noop() which does nothing
(but still "needs" alloc/free) - it would now be about 50% faster.
Overall, it's a mild performance improvements, the API is now more
consistent with lua, and without increasing code size or complexity.
mpv doesn't have other dot files in its config dir, and it also
shouldn't be "invisible".
The new name ~~/init.js now replaces ~~/.init.js
While mpv usually deprecates things before outright removing them,
in this case the old (dot) name is replaced without deprecation:
- It's a bad idea to execute hidden scripts, even if at a config dir,
and we don't want to do that for the next release cycle too.
- We warn if the old (dot) name exists and the new name doesn't,
which should be reasonably visible for affected users.
- It's likely niche enough to not cause too much pain.
If for some reason both names are needed, e.g. when using also an old
mpv versions, then the old name could be symlinked to the new one, or
simply have one line: `require("~~/init")` to load the new name, while
a new mpv version will load (only) the new name without warning.
This behavior is more convenient and allows profile conditions like:
[video]
profile-cond=get('current-tracks/video/image') == false
[image]
profile-cond=get('current-tracks/video/image')
Otherwise, these profiles have to be manually applied and restored in a
script.
The note about discouraging the use of current-tracks in scripts is
removed, because it makes people avoid using this convenient property.
It was added in 720bcd79d0 without leaving an explanation of why you
shouldn't use it, and the only reason seems to be that it doesn't work
with lavfi-complex, but this commit changes that.
This exposes whether a video track is detected as an image, which is
useful for profile conditions, property expansion and lavfi-complex.
The lavf demuxer sets image to true when the existing check detects an
image.
When the lavf demuxer fails, the mf one guesses if the file is an image
by its extension, so sh->image is set to true when the mf demuxer
succeds and there's only one file.
The mkv demuxer just sets image to true for any attached picture.
The timeline demuxer just copies the value of image from source to
destination. This sets image to true for attached pictures, standalone
images and images added with !new_stream in EDL playlists, but it is
imperfect since you could concatenate multiple images in an EDL playlist
(which should be done with the mf demuxer anyway). This is good enough
anyway since the comment of the modified function already says it is
"Imperfect and arbitrary".
The custom init script should be considered a configuration file, and
as such it should be ignored when the user wants vanilla mpv - and now
it is ignored with --no-config.
Before this commit, animation-end was handled at render(), however,
it's not called on idle, which resulted in state.anitype ~= nil, with
nothing to reset it during idle, which caused in an infinite tick()
loop (starts on first mouse move).
Now tick resets the animation on idle, and also, as a safety measure,
if we're past 1s after the animation deadline.
The safety measure is because the osc states are complex, and it's
easier to detect a "we really shouldn't be animating now" at tick()
itself rather than detecting the exact states where animation should
be reset. Generally, the safety mmeasure is not needed.
Unfortunately, this functionality in large part based on a struct
member that was made private in FFmpeg/FFmpeg@7489f63281
in May. Unfortunately, this was not noticed during review.
This reverts commit 0862664ac9.
This exposes whether a video track is detected as an image. This is
useful for profile conditions, property expansion and lavfi-complex, and
is more accurate than any detection even Lua scripts can perform, since
they can't differentiate between images and videos without container-fps
and audio and with duration 1 (which is the duration set by the mf
demuxer with the default --mf-fps=1).
The lavf demuxer image check is moved to where the number of frames is
available for comparison, and is modified to check the number of frames
and duration instead of the video codec. This doesn't misdetect videos
in a codec commonly used for images (e.g. mjpeg) as images, and can
detect images in a codec commonly used for videos (e.g. 1-frame gifs).
pix files are also now detected as images, while before they weren't
since the condition was checking if the AVInputFormat name ends with
_pipe, and alias_pix doesn't.
Both nb_frames and codec_info_nb_frames are checked because nb_frames is
0 for some video codecs (hevc, av1, vc1, mpeg1video, vp9 if forcing
--demuxer=lavf), and codec_info_nb_frames is 1 for others (mpeg, mpeg4,
wmv3).
The duration is checked as well because for some uncommon codecs and
containers found in FFMpeg's FATE suite, libavformat returns nb_frames =
0 and codec_info_nb_frames = 1. For some of them it even returns
duration = 0, so they are blacklisted in order to never be considered
images.
The extra codecs that would have to be blacklisted without checking the
duration are AV_CODEC_ID_4XM, AV_CODEC_ID_BINKVIDEO,
AV_CODEC_ID_DSICINVIDEO, AV_CODEC_ID_ESCAPE130, AV_CODEC_ID_MMVIDEO,
AV_CODEC_ID_NUV, AV_CODEC_ID_RL2, AV_CODEC_ID_SMACKVIDEO and
AV_CODEC_ID_XAN_WC3, while the containers are film-cpk, ivf and ogg.
The lower limit for duration is 10 because that's the duration of
1-frame gifs.
Streams with codec_info_nb_frames 0 are not considered images because
vp9 and av1 have nb_frames = 0 and codec_info_nb_frames = 0, and we
can't rely on just the duration to detect them because they could be
livestreams without an initial duration, and actually even if we could
for these codecs libavformat returns huge negative durations like
-9223372036854775808.
Some more images in the FATE suite that are really frames cut from a
video in an uncommon codec and container, like cine/bayer_gbrg8.cine,
could be detected by allowing codec_info_nb_frames = 0, but then any
present and future video codec with nb_frames = 0 and
codec_info_nb_frames = 0 would need to be added to the blacklist. Some
even have duration > 10, so to detect these images the duration check
would have to be removed, and all the previously mentioned extra codecs
and containers would have to be added added to the blacklists, which
means that images that use them (if they exist anywhere) will never be
detected. These FATE images aren't detected as such by mediainfo either
anyway, nor can a Lua script reliably detect them as images since they
have container-fps and duration > 0 and != 1, and you probably will
never see files like them anywhere else.
For attached pictures the lavf demuxer always set image to true, which
is necessary because they have duration > 10. There is a minor change in
behavior for which audio with attached pictures now has mf-fps as
container-fps instead of unavailable, but this makes it consistent with
external cover art, which was already being assigned mf-fps.
When the lavf demuxer fails, the mf one guesses if the file is an image
by its extension, so sh->image is set to true when the mf demuxer
succeds and there's only one file.
Even if you add a video's file type to --mf-type and open it with the mf
protocol, only the first frame is used, so setting image to true is
still accurate.
When converting an image to the extensions listed in demux/demux_mf.c,
tga and pam files are currently the only ones detected by the mf demuxer
rather than lavf. Actually they are detected with the image2 format, but
it is blacklisted; see d0fee0ac33.
The mkv demuxer just sets image to true for any attached picture.
The timeline demuxer just copies the value of image from source to
destination. This sets image to true for attached pictures, standalone
images and images added with !new_stream in EDL playlists, but it is
imperfect since you could concatenate multiple images in an EDL playlist
(which should be done with the mf demuxer anyway). This is good enough
anyway since the comment of the modified function already says it is
"Imperfect and arbitrary".
Previously, loading ~~/.init.js was inside a try block, in order to
quietly ignore errors if the file doesn't exist.
However, that also prevented any real errors from showing up even when
the file does exist, and the script continued as if everything is OK,
while in fact the custom init script didn't complete correctly.
Now we first check if the file exists, and then load it without
try/catch, so that any error shows up normally (and abort the script).
Because youtube-dl is inactive and the yt-dlp fork is becoming more
popular, make mpv use yt-dlp without any extra configuration.
yt-dlp is ordered before youtube-dl because it's more obscure, so users
who have yt-dlp installed are more likely to want to use it rather than
youtube-dl.
Fixes#9208.
The "cycle" command _declaration_ enables repeatability by default,
however, the command handler applies additional logic to augment it,
based on the property which is being cycled - using some guesswork.
Specifically, properties with discrete values are not repeatable
(like sub or osd-level), while continuous properties are repeatable
(like volume).
Previously, the "repeatable" prefix could not override this additional
logic.
This commit changes the behavior so that the logic affects only the
default repeatability (still based on the property like before),
however, the "repeatable" prefix is now allowed to override it.
When changing video track with subtitles with unknown duration, they
aren't shown until you seek, cycle sub back and forth, or apply a video
filter. This is caused by reinit_video_chain_src() calling
reset_subtitle_state() -> sub/sd_ass.c:reset() -> ass_flush_events()
when ctx->duration_unknown is true.
The ass_flush_events() call was added in a714f8e so subs with unknown
duration wouldn't multiply on seek, i.e. when reset_subtitle_state() is
called from reset_playback_state(). So keep calling it from there, and
in reinit_video_chain_src() use just term_osd_set_subs(mpctx, NULL)
instead to clear any subtitles printed to the terminal. The
reset_subtitle_state() call was added in c1ac97b to "reset the state
correctly when switching between video/no-video", but with it removed I
no longer notice any issue doing that.
29e15e6248 prefixed youtube-dl's subs url with an edl prefix to not
download them until they're selected, which is useful when there are
many sub languages. But this prefix broke the alignment of secondary
subs, which would overlap the primary subs instead of always being
placed at the top. This can be tested with
--sub-file='edl://!no_clip;!delay_open,media_type=sub;secondary_sub.srt'
When a sub is added, sub.c:reinit_sub() is called. This calls in
init_subdec() -> dec_sub.c:sub_create() -> init_decoder() ->
sd_ass:init(). Then reinit_sub() calls
sub_control(track->d_sub, SD_CTRL_SET_TOP, &(bool){!!order}) which sets
sd_ass_priv.on_top = true for secondary subs.
But for EDL subs the real sub is initialized again when in
dec_sub.c:sub_read_packets() is_new_segment() returns true and
update_segment() is called, or when sub_get_bitmaps() calls
update_segment(). update_segment() then calls init_decoder(), which
calls sd_ass:init(), so sd_ass_priv is reinitialized, and its on_top
property is left false. This commit sets it to true again.
For URLs that need to be downloaded it seems that the update_segment()
call that reinitializes sd_ass_priv is always the one in
sub_read_packets(), but with local subs sub_get_bitmaps() is usually
called earlier (though there shouldn't be a reason to use the EDL URL
for local subs), so I added the order parameter to sub_create(), rather
than adding it to all of update_segment(), sub_read_packets() and
sub_get_bitmaps().
Also removes the cast to bool in the other sub_control call, since
sub/sd_ass.c:control already casts arg to bool when cmd is
SD_CTRL_SET_TOP.
When performing the scaling calculations, the window scale properties do
not bother checking for potential monitor par. The vo keeps track of
this via vo->monitor_par. Simply multiply/divide the video's width or
height depending on the value of monitor_par. We also clamp the values
to avoid the values running away to infinity in extreme cases.
The vo currently handles rotations in 90 degree steps and some VOs set
this via VO_CAP_ROTATE90. When the rotation exactly hits either 90 or
270 degrees, this causes the values of dwidth and dheight to perfectly
swap like one would expect. However, the mp_image_params_get_dsize
function call in both of the window scale functions do not take this
special case into account. So the width/height values returned will be
incorrectly flipped in the 90 and 270 degree cases if the vo driver does
implement VO_CAP_ROTATE90 (like vo=gpu). Fortunately, the
mp_image_params struct keeps track of the rotation for us. So all we
need to do is check if the image is rotated at 90 or 270 degrees and
check that the current vo driver supports VO_CAP_ROTATE90. If so, then
swap vid_w and vid_h to their true, correct values.
Based on a small patch originally written by @avih. Instead of
duplicating the window-scale logic in update_window_scale, just call the
mp_property_current_window_scale function with the M_PROPERTY_SET action
and a NULL property.
The window-scale property mirrors the respective option (not the
effective scale derived from the current window size), and as such
setting its value to the same value it had before has no effect.
Specifically - the window will not resize.
This is consistent as far as property-option bridge behavior goes,
but we do end up with an issue that we can't set an arbitrary scale
and expect the window to always resize accordingly.
We do also have a current-window-scale property which does reflect
the actual window size, however, it's been read-only till now.
This commit makes current-window-scale RW so that it's now always
possible to set an arbitrary scale and expect the window to resize
accordingly (without affecting window-scale - like manual resize).
Also, mention window-scale no-effect-if-not-changed at the docs.
Based on code by @Dudemanguy from commit 873ae0d, with same effect.
This reverts commit 873ae0de2a.
The next commit will restore this functionality, with the
following differences from the reverted commit:
- Smaller and simpler code change.
- On bad scale: use "Invalid value" (compared to "no such property").
- Doesn't combine the docs for window-scale and current-window-scale.
- Doesn't remove the docs for window-scale behavior prior to 0.31.0.
Somewhat confusingly, mpv has both a window-scale option and a
current-window-scale property. The documentation lists window-scale
under properties (and it is technically is one), but at its core it is
actually an option which means it behaves subtly different. Options in
mpv are runtime-configurable, but they only change anything if the value
of the option itself changes. window-scale is an option and not meant to
keep track of the actual scale of the window (intended behavior
introduced by d07b7f0). This causes window-scale to do nothing in
certain cases (ex: the window is manually resized and window-scale is
set to 1.00 again). This is logical and consistent with the behavior of
the rest of the mpv options, but it also makes it a poor candidate for
setting the mpv window scale dynamically.
As a remedy, we can just make current-window-scale writeable instead.
current-window-scale is intended to always report the actual scale of
the window and keep track of any window size changes made by the user.
By making this property also writeable, it allows the user to have more
intuitive behavior (i.e. setting current-window-scale to 1.00 always
sets the window to a scale of 1). Additionally, the default input.conf
is changed to use current-window-scale instead of window-scale. The
window-scale documentation under property list is removed since it is
already documented under options and users should probably set the
current-window-scale property instead in most cases.
Previously we assumed the key-name string occupies strlen(name) cells,
now we count codepoints instead.
This improves alignment of non-english key names. Still not perfect
because we don't know if the key name is single or double width, but
wcwidth not available to scripts, notoriously unreliable (depends on
locale, correct and updated tables, etc), and also not always
available (Windows).
Still, better than nothing, and we err by at most one cell - vs up to
three before this commit (4 bytes keyname codepoint).
In the future we could do the alignment using libass tags, however,
this both complicates the ass-output generation, and also not available
when we output for the terminal, so for now only count codepoints.
Also, if the key name was in a right-to-left language, then previously
the name/command were swapped visually. Now we inject a left-to-right
marker before the name to ensure direction. This works also when
harfbuzz is disabled for libass (--sub-ass-shaper=simple).
