A ton of code and drm-specific abstractions can be dropped with this.
One important thing to note is that the usage of sbc is completely
dropped here. The utility of that is not particularly clear since the
sbc value was manually incremented before the flip and it's not as if
the drm page flip event gives it to us like it does with the msec and
ust. It can be reintroduced later if there is a need. For drm, we also
add a present_sync_clear_values helper since all presentation feedback
needs to be cleared on pause/resume for it.
when vo_drm_init() fails inside of preinit(), uninit() will be called as
part of cleanup with vo->drm being NULL and thus `drm->fd` would lead to
null dereference.
and since vo_drm_uninit() closes drm->fd, destroy_framebuffer() ends up
using a closed fd.
according to the drm-gem manpage [0]:
> If you close the DRM file-descriptor, all open dumb-buffers are
> automatically destroyed.
so remove the destroy_framebuffer() loop entirely, which fixes both the
issues.
[0]: https://www.systutorials.com/docs/linux/man/7-drm-gem/
A longstanding pain point of the drm VOs is the relative lack of state
sharing. While drm_common does provide some sharing, it's far less than
other platforms like x11 or wayland. What we do here is essentially copy
them by creating a new vo_drm_state struct and using it in vo_drm and
context_drm_egl. Much of the functionality that was essentially
duplicated in both VOs/contexts is now reduced simple functions in
drm_common. The usage of the term 'kms' was also mostly eliminated since
this is libdrm nowadays from a userspace perspective.
The legacy DRM API adds some complexity to the DRM code. There
are only 4 drivers that do not support the DRM Atomic API:
1. radeon (early GCN amd cards)
2. gma500 (ancient intel GPUs)
3. ast (ASPEED SoCs)
4. nouveau
Going forward, new DRM drivers will be guaranteed to support the atomic
API so this is a safe removal.
The ioctls were disabled a while back since they error out and allegedly
cause problem with X running in another VT.
Omitting the ioctls is not cool, even as a workaround.
If they fail, the user is supposed to fallback appropriately - use a suid
wrapper, logind-like daemon or otherwise.
As of kernel 5.10, they should just work in nearly all cases, so let's
just reinstate the calls.
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
For some reason, this never existed before. Add VOCTRL_GET_DISPLAY_RES
and use it to obtain the current display's resolution from each
vo/windowing backend if applicable. Users can then access the current
display resolution as display-width and display-height as per the client
api. Note that macOS/cocoa was not attempted in this commit since the
author has no clue how to write swift.
The image w and h members must match params.w and params.h, so
should not be changed directly. The helper function mp_image_set_size
is designed for this purpose, so just use that instead.
This prevents an assertion error with the rewritten draw_bmp.
Fixes#7721.
drmModeAddFB is legacy, and might not pick the pixel format you
expect, depending on your driver. Use drmModeAddFB2 which specifies
this explicitly using a fourcc.
Seems like some drivers only increment msc every other page flip when
running in interlaced mode (I'm looking at you nouveau). I.e. it seems
to be incremented at the frame rate, rather than the field rate.
Obviously we can't work with this, so shame the driver and bail.
On intel this isn't an issue, as msc is incremented at field rate
there.
This means presentation feedback won't work correctly in interlaced
modes with those drivers, but who in their right mind uses an
interlaced mode these days, anyway?
Purpose uncertain. I guess it's slightly better, maybe.
The move of the sws/zimg options from VO opts (vo_opt_list) to the
top-level option list is tricky. VO opts have some helper code in vo.c,
that sends VOCTRL_SET_PANSCAN to the VO on every VO opts change. That's
because updating certain VO options used to be this way (and not just
the panscan option). This isn't needed anymore for sws/zimg options, so
explicitly move them away.
Turns out clearing all frambuffers in reconfig isn't such a great idea
when you also end up here when setting pan/scan.
I guess this is just a leftover from a previous iteration of vo_drm
where doing this made sense.
Swapchain depth currently hard-coded to 3 (4 buffers).
As we now avoid redrawing on repeat frames (we simply requeue the same fb
again), this should give a nice performance boost when playing videos with a
lower FPS than the display FPS in video-sync=display-resample mode.
Presentation feedback has also been implemented to help counter the
significant amounts of jitter we would otherwise be seeing.
This was implemented by using OPT_STRING_VALIDATE for drm-mode,
instead of OPT_INT. Using a string here also prepares for future
additions to drm-mode that aim to allow specifying a mode by its
resolution.
It is useful when debugging to be able to force atomic off, or as a
workaround if atomic breaks for some user. Legacy modesetting is less
likely to break by virtue of being a less complex API.
This commit bumps the libmpv version to 1.102
drm-osd-plane -> drm-draw-plane
drm-video-plane -> drm-drmprime-video-plane
drm-osd-size -> drm-draw-surface-size
"draw plane", as in the plane that OpenGL draws to, whether it be
video + OSD or just OSD.
"drmprime video plane", as in the plane used for hwdec video imported
via drmprime.
"draw surface size", as in the size of the surface used for the draw plane
The new names are invariant whether or not hwdec_drmprime_drm is being
used or not. The original naming was very confusing, as when doing
regular rendering (swdec or vaapi) the video would be displayed on the
"OSD plane", and the "Video plane" would remain unused.
The previous code did not save enough information about the old state,
and could end up changing what plane the fbcon:s FB got attached to,
or in worse case causing a blank screen (observed in some multi-screen
setups on Sandy Bridge).
In addition refactor the handling of drmModeModeInfo property blobs to
not leak, as well as enable reuse of already created blobs.
We are currently using primary / overlay planes drm objects, assuming that primary plane is osd and overlay plane is video.
This commit is doing two things :
- replace the primary / overlay planes members with osd and video planes member without the assumption
- Add two more options to determine which one of the primary / overlay is associated to osd / video.
- It will default osd to overlay and video to primary if unspecified
crtc_setup gets called on VT reacquire as well as during normal setup. When
called during VT reacquire p->front_buf might not be 0, so the maths was wrong,
and could cause array OOB errors. Use mathematically correct (for negative
numbers) modulo to always pick the farthest away buffer (should work
even for larger values of BUF_COUNT).
When pixels are non-square, the appropriate value of vo->monitor_par is
necessary to determine the destination rectangle, which in turn tells
how to scale the video along the x and y axis. Before this commit, the
drm driver only used --monitorpixelaspect. For example, to play a video
with the right aspect on a 4:3 screen and 640:400 pixels,
--monitorpixelaspect=5:6 had to be given.
With this commit, vo->monitor_par is determined from the size of the
screen in pixels and the --monitoraspect parameter. The latter is
usually easier to determine than --monitorpixelaspect, since it is
simply the proportion between the width and the height of the screen,
in most cases 16:9 or 4:3. If --monitoraspect is not given,
--monitorpixelaspect is used if given, otherwise pixel aspect is
assumed 1:1.
This commit allows for video to be shown with the right aspect even when
pixels are not square in the selected drm mode. For example, if drm mode
5 is "640x400", the right aspect on a 4:3 monitor is obtained by mpv
--vo=drm --drm-mode=5 --monitorpixelaspect=5:6 ...
Other vo's seem to make this parameter change the size of the window,
but in the drm vo this is fixed, being as large as the screen.
The last image is stored in vo->priv->last_input to be used when
redrawing a frame is necessary (control: VOCTRL_REDRAW_FRAME). At the
beginning it is NULL, so a redraw request has no effect since
draw_image ignores calls with image=NULL.
When using --force-window the size of the image may change without the
vo structure being re-created. Before this commit, the size of
vo->priv->last_input could become inconsistent with the cropping
rectangle vo->priv->src_rc, which could trigger an assert in
mp_image_crop_rc(). Even if it did not, the last image of a video
remained on the screen when the next file in the playlist had no video
(e.g., it was an mp3 without an embedded cover).
This commit deallocates and resets to NULL the image
vo->priv->last_input when reconfiguring video.
Before this commit, the drm vo drew the osd over the scaled image, and
then copied the result onto the framebuffer, shifted. This made the
frame centered, but forced the osd to be only as large as the image.
This was inconsistent with other vo's, covered the image with the
progress indicator even when a black band was at the top of the screen,
made the progress indicator wrap on narrow videos, etc.
The change is to always use an image as large as the screen. The frame
is copied scaled and shifted to it, and the osd drawn over it. The
result is finally copied to the framebuffer without any shift, since it
is already as large as it.
Technically, cur_frame is an image as large as the screen and
cur_frame_cropped is a dummy reference to it, cropped to the size of
the scaled video. This way, copying the scaled image to
cur_frame_cropped positions the image in the right place in cur_frame,
which can then have the osd added to it and copied to the framebuffer.
mp_sws_set_from_cmdline() has the only purpose to respect the --sws-
command line options. Instead of forcing callers to get the option
struct containing these, let callers pass mpv_global, and get it from
the option core code directly. This avoids minor annoyances later on.
This commit allows to use the AV_PIX_FMT_DRM_PRIME newly introduced
format in ffmpeg that allows decoders to provide an AVDRMFrameDescriptor
struct.
That struct holds dmabuf fds and information allowing zerocopy rendering
using KMS / DRM Atomic.
This has been tested on RockChip ROCK64 device.
When the drm video output is used under VT with a terminal multiplexer
like screen, the VT_SETMODE ioctl call will fail since the controlling
terminal is a pseudoterminal instead of a real one, thus the VT switcher
will be unavailable.
The problem is, the wait_events function inside vo_drm.c will test for
this, and will do nothing if the switcher is not active. Normally, this
would not be noticed, however, when you pause a video, or if you're playing
multiple image files, mpv will suddenly start busy waiting on a single
core.
I confirmed this by building mpv with gprof support, in a few seconds,
wait_events got called about 90 million times.
So I added a fallback, when the VT switcher is not availble, just use the
vo_wait_default function. I tested it and it's working well so far.
I'm not sure what systems have <sys/poll.h> (maybe there are historical
reasons why some would), but POSIX defines <poll.h>. Although this code
is full of highly OS specific calls (like ioctl()), there's no reason
not to use the more standard include path.
Long planned. Leads to some sanity.
There still are some rather gross things. Especially g_groups is ugly,
and a hack that can hopefully be removed. (There is a plan for it, but
whether it's implemented depends on how much energy is left.)
- Change connector selection to accept human readable names (such as
eDP-1, HDMI-A-2) rather than arbitrary numbers.
- Change GPU selection to accept GPU number rather than device paths.
- Merge connector and GPU selection into one --drm-connector.
- Add support for --drm-connector=help.
- Add support for --drm-* in EGL backend.
- Refactor KMS; reduce state sharing across drm_common.
Reduces code duplication between OpenGL backend and DRM VO.
(The control() for OpenGL backend isn't sufficiently similar to the
VO's control() to consider merging it as a whole - I extracted only the
FPS code.)
It was used to determine whether the VO supports VOCTRL_SET_PANSCAN.
With all those changes to property semantics this became unnecessary,
and its only use was dropped at some point.
Until now, this has been either handled over vo.event_fd (which should
go away), or by putting event handling on a separate thread. The
backends which do the latter do it for a reason and won't need this, but
X11 and Wayland will, in order to get rid of event_fd.
Do this to make the license situation less confusing.
This change should be of no consequence, since LGPL is compatible with
GPL anyway, and making it LGPL-only does not restrict the use with GPL
code.
Additionally, the wording implies that this is allowed, and that we can
just remove the GPL part.
MPlayer traditionally always used the display aspect ratio, e.g. 16:9,
while FFmpeg uses the sample (aka pixel) aspect ratio.
Both have a bunch of advantages and disadvantages. Actually, it seems
using sample aspect ratio is generally nicer. The main reason for the
change is making mpv closer to how FFmpeg works in order to make life
easier. It's also nice that everything uses integer fractions instead
of floats now (except --video-aspect option/property).
Note that there is at least 1 user-visible change: vf_dsize now does
not set the display size, only the display aspect ratio. This is
because the image_params d_w/d_h fields did not just set the display
aspect, but also the size (except in encoding mode).
