Commit a1315c76 broke this slightly. Frame drops got counted multiple
times, and also vo.c was actually trying to "render" the dropped frame
over and over again (normally not a problem, since frames are always
queued "tightly" in display-sync mode, but could have caused 100% CPU
usage in some rare corner cases).
Do not repeat already dropped frames, but still treat new frames with
num_vsyncs==0 as dropped frames. Also, strictly count dropped frames in
the VO. This means we don't count "soft" dropped frames anymore (frames
that are shown, but for fewer vsyncs than intended). This will be
adjusted in the next commit.
vo_frame.num_vsyncs can be != 1 in some cases in normal sync mode too.
This is not a very exact fix, but in exchange it's robust. (These
vo_frame flags are way too tricky in combination with redrawing and
such.)
There were occasional shader compilation and rendering failures if FBOs
were unavailable. This is caused by the FBO caching code getting active,
even though FBOs are unavailable (i.e. dumb-mode).
Boken by commit 97fc4f.
Fixes#2432.
Fixes linker failure. How did this ever work? Apparently it did most of
the time, but apparently we just got the first case where it didn't.
Fixes#2433.
av_free_packet() got finally deprecated. Use av_packet_unref() instead,
which has almost the same semantics, has existed for a while, and is
available in all FFmpeg and Libav versions we support.
This was not very reliable.
In the normal vo_opengl case, this didn't deal well enough with vsync
jitter. Vsync timings can jitter quite extremely, up to a whole vsync
duration, in which case the "missed" frame counter keeps growing, even
though nothing is wrong. This behavior also messes up the A/V difference
calculation, but as long as it's within tolerance, it won't provoke
extra frame dropping/repeating. Real misses are harder to detect, and I
might add such detection later.
In the vo_opengl_cb case, this was additionally broken due to the
asynchronity between renderer and VO threads.
This speeds up redraws considerably (improving eg. <60 Hz material on a 60 Hz
monitor with display-sync active, or redraws while paused), but slightly
slows down the worst case (eg. video FPS = display FPS).
The IME is not useful for key-bindings. Handle the base ASCII chars
instead and don't show the IME window. For the sake of libmpv users, the
IME should only be disabled on mpv's GUI thread and not application-
wide.
No IME on the GUI thread should also mean that VK_PROCESSKEY will never
have to be handled, so the logic for that can be removed as well.
Older systems have certain EGL extension definitions missing. We
redefine them to make the build system easier, and because it's trivial.
But we forgot to define the EGL_LINUX_DMA_BUF_EXT identifier. (I hope
it's the only missing one.)
The equalizer code as it exists in vo_opengl works perfectly fine. The
situation in vo_opengl_cb is pretty different. The playback thread can't
communicate with the renderer thread synchronously (essentially to give
the API user more flexibility). So the equalizer communication has to be
done in an asynchronous way too.
There were two problems. First, the eq capabilities can change with the
pixel format, and the renderer initializes them on config only. This
means equalizers were disabled on the first config run, and options like
--video-output-levels or --brightness would not work. So we just
initialize the caps with a known superset. The player will not correctly
indicate when setting an eq doesn't work, but we're fine with it, as it
is a relatively cosmetic issue.
Second, it copied back the eq settings in the "wrong" moment (what
for?), which overwrote the settings in some cases.
Third, the eq was not reset correctly on vo init. This is needed to make
it behave the same as vo_opengl.
It's great that the new algorithm supports multiple placebo iterations
and all, but it's really not necessary and hurts performance in the
general case for the sake of the 0.1% that actually pause the screen
and look for minute differences.
Signed-off-by: wm4 <wm4@nowhere>
This reverts commit c10fb4ce9f.
This is already done in vo_wayland.c:resize,324 doing it here makes the window bigger before the video resizes showing a black area while dragging the border.
The previous commit moved the av_frame_unref() after the got_picture
check. This accidentally also deferred the software fallback
reinitialization to until a software picture was decoded (instead of the
exact time of the fallback), which is not ideal.
Just rely on the fact that calling av_frame_unref() on a frame is ok
even if nothing was decoded.
Commit 12cd48a8 started setting the hwdec_failed field even if hwdec was
not active, and because it also checked this field even if hwdec was not
active, broke decoding forever.
Fix this, and also avoid a memory leak or API misuse by releasing the
decoded picture. Passing an unreleased frame to the decoder has as far
as I know no defined effects.
Adds support for AV_PIX_FMT_GBRP9, AV_PIX_FMT_GBRP10, AV_PIX_FMT_GBRP12,
AV_PIX_FMT_GBRP14, AV_PIX_FMT_GBRP16, AV_PIX_FMT_GBRAP, and
AV_PIX_FMT_GBRAP16.
(Not that it matters, because nobody uses these anyway.)
This VA_FOURCC isn't even defined by latest drivers, so I'm just
assuming it doesn't exist and never existed. For planar 4:2:0,
VA_FOURCC_YV12 is normally preferred, and there's even a VA_FOURCC_IYUV
for 4:2:0 with unswapped planes.
0.34 and 0.35 don't have the buffer API, such as vaAcquireBufferHandle.
This is only needed for the EGL interop, but why bother staying
compatible for such old things (0.36 was released over a year ago).
We also can drop some minor compatibility ifdeffery.
When seeking, the current frame will have the wrong timestamp, until the
seek is done and a new frame from the seek target is shown. We still use
the "old" frame for redrawing during seeks. This frame has to be
explicitly marked with still=true in order not to confuse the
interpolation queue. If this is not done, it will ignore frames until a
frame with approximately the same timestamp as the "old" frame is
reached. (Does this mean interpolation handles timestamp resets
incorrectly? I have no idea.)
Of course we also have to clear possibly queued frames on seeks.
Also, in pausing, explicitly let the frame redraw.
Newer nVidia drivers support EGL, but they seem to work badly,
apparently don't support some needed features or not in a form we want
(such as swap control), and vdpau interop is not available. Disable it
by default, because I'm tired of explaining this issue.
Can be reverted as soon as nVidia release working drivers.
The libavcodec h264 decoder contains some idiotic code with unknown
purpose (no sample or explanation known that necessitates its
existence), that causes the AVCodecContext.get_format callback to be
invoked at a time when hwaccels can't be initialized. By definition, the
get_format callback is supposed to initialize hwaccels (another idiotic
thing now part of the API, but different story). This causes hwdec
initialization sometimes to fail (WolfensteinTwitch.mp4): the first
get_format callback will mark it as failed, so the second get_format
(the "proper" normal one) will not bother restoring the state, and hwdec
init fails.
While this should be fixed in libavcodec (good luck with that), it's
quite easy to workaround.
This fixes a regression since commit f4d62da8. The original code run
vo_cocoa_config_window() once without creating the window, which had the
effect that the last part of the function was run at least once before
the actual window was created. Fix the regression by moving it to before
the window is created.
The regression itself is hard to describe. One test case: start mpv from
a fullscreened terminal window. It should switch to another desktop,
with the mpv window visible. This didn't happen anymore.
Use the first encountered packet PTS/DTS as base, instead of the last
one. This does not add the amount of frames buffered in the codec to the
PTS offset, and thus is better.
Also, don't add the frame time if there was no decoded frame yet. The
first frame should obviously have the timestamp of the first packet
(going by this heuristic).
While b-frame reordering limits the maximum required number to around
16, the number of additionally buffered frames can be much higher.
Guess when this actually matters? (For the libavcodec MMAL wrapper.)
Useless. Sometimes it might be useful to make some extremely broken
files work, but on the other hand --no-correct-pts is sufficient for
these cases.
While we still need some of the code for AVI, the "auto" mode in
particular inflated the size of the code.
This can't be handled correctly at all. Other cases when the decoder
might drop a frame (such as completely failing to decode a frame) will
shift timestamps by a frame, and it can't be avoided.
While we could maybe find a better way to handle this with libavcodec's
main decoders, this seems to be much harder if it should work with
certain HW decoders, which don't passthrough the DTS field (such as
MMAL). Another problem are .avi files with b-frames. So just leave it
as it is.
This was used only by the timestamp sorting code, which is a fallback
for avi files (as well as avi-muxed mkv files). This was supposed to
prevent accumulating timestamps in case the decoder consumes more
packets than it outputs frames (i.e. frames are dropped). This didn't
work very well (timestamps could be off by a large amount), the
estimation of the delay was fragile, and the interdependencies with the
decoder were annoying, so kill it.
This parameter has been unused for years (the last flag was removed in
commit d658b115). Get rid of it.
This affects the general VO API, as well as the vo_opengl backend API,
so it touches a lot of files.
The VOFLAGs are still used to control OpenGL context creation, so move
them to the OpenGL backend code.
