A format could declare that some or all LSBs in a component are padding
bits by setting a non-0 AVComponentDescriptor.shift value. This means we
would interpret it incorrectly, because until now we always assumed all
regular formats have the padding in the MSBs.
Not a single format that does this actually exists, though. But a NV12
variant will be added later in FFmpeg.
This removes the need to define IMGFMT_GBRAP, which fixes compilation
with the current Libav release.
This also makes it automatically pick up a GBRP format with the same bit
width. (Unfortunately, it seems libswscale does not support conversion
to AV_PIX_FMT_GBRAP16, so our code falls back to 8 bit, removing
precision for video covered by subtitles in cases this code is used.)
Also, when the source video is e.g. 10 bit YUV, upsample to 16 bit.
Whether this is good or bad, it fixes behavior with alpha. Although I'm
not sure if the alpha range is really correct ([0,2^16-1] vs.
[0,255*256]). Keep in mind that libswscale doesn't even agree with the
way we do it.
The computation of the tex_mul variable was broken in multiple ways.
This variable is used e.g. by debanding for moving expansion of 10 bit
fixed-point input to normalized range to another stage of processing.
One obvious bug was that the rgb555 pixel format was broken. This format
has component_bits=5, but obviously it's already sampled in normalized
range, and does not need expansion. The tex_mul-free code path avoids
this by not using the colormatrix. (The code was originally designed to
work around dealing with the generally complicated pixel formats by only
using the colormatrix in the YUV case.)
Another possible bug was with 10 bit input. It expanded the input by
bringing the [0,2^10) range to [0,1], and then treating the expanded
input as 16 bit input. I didn't bother to check what this actually
computed, but it's somewhat likely it was wrong anyway. Now it uses
mp_get_csp_mul(), and disables expansion when computing the YUV matrix.
PAL8 is the only format that is RGB, has only 1 component, is byte-
aligned. It was accidentally detected by the GBRP case as planar RGB.
(It would have been ok if it were gray; what ruins it is that it's
actually paletted, and the color values do not correspond to colors (but
palette entries).
Pseudo-pal formats are ok; in fact AV_PIX_FMT_GRAY is rightfully marked
as MP_IMGFLAG_YUV_P.
Adds support for AV_PIX_FMT_GBRP9, AV_PIX_FMT_GBRP10, AV_PIX_FMT_GBRP12,
AV_PIX_FMT_GBRP14, AV_PIX_FMT_GBRP16, AV_PIX_FMT_GBRAP, and
AV_PIX_FMT_GBRAP16.
(Not that it matters, because nobody uses these anyway.)
VideoToolbox is preferred. Now that FFmpeg released 2.8, there's no
reason to support VDA anymore. In fact, we had a bug that made VDA not
useable with older FFmpeg versions in some newer mpv releases.
VideoToolbox is supported even on slightly older OSX versions, and if
not, you still can run mpv without hw decoding.
These were normalized and are saner now. We want to use the new fields,
and also get rid of the deprecation warnings, so use them. There's no
release yet which uses these, so some ifdeffery is unfortunately needed.
VDA is being deprecated in OS X 10.11 so this is needed to keep hwdec working.
The code needs libavcodec support which was added recently (to FFmpeg git,
libav doesn't support it).
Signed-off-by: Stefano Pigozzi <stefano.pigozzi@gmail.com>
Simply clamp off the U/V components in the colormatrix, instead of doing
something special in the shader.
Also, since YA8/YA16 gave a plane_bits value of 16/32, and a colormatrix
calculation overflowed with 32, add a component_bits field to the image
format descriptor, which for YA8/YA16 returns 8/16 (the wrong value had
no bad consequences otherwise).
If video output and VO don't support the same format, a conversion
filter needs to be insert. Since a VO can support multiple formats, and
the filter chain also can deal with multiple formats, you basically have
to pick from a huge matrix of possible conversions.
The old MPlayer code had a quite naive algorithm: it first checked
whether any conversion from the list of preferred conversions matched,
and if not, it was falling back on checking a hardcoded list of output
formats (more or less sorted by quality). This had some unintended side-
effects, like not using obvious "replacement" formats, selecting the
wrong colorspace, selecting a bit depth that is too high or too low, and
more.
Use avcodec_find_best_pix_fmt_of_list() provided by FFmpeg instead. This
function was made for this purpose, and should select the "best" format.
Libav provides a similar function, but with a different name - there is
a function with the same name in FFmpeg, but it has different semantics
(I'm not sure if Libav or FFmpeg fucked up here).
This also removes handling of VFCAP_CSP_SUPPORTED vs.
VFCAP_CSP_SUPPORTED_BY_HW, which has no meaning anymore, except possibly
for filter chains with multiple scale filters.
Fixes#1494.
Make their meaning more exact, and don't pretend that there's a
reasonable definition for "bits-per-pixel". Also make unset fields
unavailable.
average_depth still might be inconsistent: for example, 10 bit 4:2:0 is
identified as 24 bits, but RGB 4:4:4 as 12 bits. So YUV formats
seemingly drop the per-component padding, while RGB formats do not.
Internally it's consistent though: 10 bit YUV components are read as
16 bit, and the padding must be 0 (it's basically like an odd fixed-
point representation, rather than a bitfield).
This is a rather radical change: instead of maintaining a whitelist of
FFmpeg formats we support, we automatically support all formats.
In general, a format which doesn't have an explicit IMGFMT_* name will
be converted to a known format through libswscale, or will be handled
by code which can treat pixel formats in a generic way using the pixel
format description, like vo_opengl.
AV_PIX_FMT_UYYVYY411 is a special-case. It's packed YUV with chroma
subsampling by 4 in both directions. Its component order is documented
as "Cb Y0 Y1 Cr Y2 Y3", meaning there's one UV sample for 4 Y samples.
This means each pixel uses 1.5 bytes (4 pixels have 1 UV sample, so
4 bytes + 2 bytes). FFmpeg can actually handle this format with its
generic mechanism in an extremely awkward way, but it doesn't work for
us. Blacklist it, and hope no similar formats will be added in the
future.
Currently, the AV_PIX_FMT_*s allowed are limited to a numeric value of
500. More is not allowed, and there are some fixed size arrays that need
to contain any possible format (look for IMGFMT_END dependencies).
We could have this simpler by replacing IMGFMT_* with AV_PIX_FMT_*
through the whole codebase. But for now, this is better, because we
can compensate for formats missing in Libav or older FFmpeg versions,
like AV_PIX_FMT_RGB0 and others.
FFmpeg has only a AV_PIX_FMT_FLAG_BE flag, not a LE one, which causes
problems for us: we want to have the LE flag too, so code can actually
detect whether a format is non-native endian. Basically, we want to
reconstruct the LE/BE suffix all AV_PIX_FMT_*s have.
Doing this is hard due to the (messed up) way AVPixFmtDescriptor works.
The worst is AV_PIX_FMT_RGB444: this group of formats describe an
endian-independent access (since no component actually spans 2 bytes,
you only need byte accesses with a fixed offset), so we have to go
through some pain.
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
This affects packed RGB formats up to 16 bits per pixel. The old mplayer
names used LSB-to-MSB order, while FFmpeg (and some other libraries) use
MSB-to-LSB.
Nothing should change with this commit, i.e. no bit order or endian bugs
should be added or fixed. In some cases, the name stays the same, even
though the byte order changes, e.g. RGB8->BGR8 and BGR8->RGB8, and this
affects the user-visible names too; this might cause confusion.
These suffixes are annoying when they're redundant, so strip them
automatically. On little endian machines, always strip the "le" suffix,
and on big endian machines vice versa (although I don't think anyone
ever tried to run mpv on a big endian machine).
Since pixel format strings are returned by a certain function and we
can't just change static strings, use a trick to pass a stack buffer
transparently. But this also means the string can't be permanently
stored by the caller, so vf_dlopen.c has to be updated. There seems
to be no other case where this is done, though.
Integrate it with the existing surface allocator in vdpau.c. The changes
are a bit violent, because the vdpau API is so non-orthogonal: compared
to video surfaces, output surfaces use a different ID type, different
format types, and different API functions.
Also, introduce IMGFMT_VDPAU_OUTPUT for VdpOutputSurfaces wrapped in
mp_image, rather than hacking it. This is a bit cleaner.
The most user visible change is that "420p" is now displayed as
"yuv420p". This is what FFmpeg uses (almost), and is also less confusing
since "420p" is often confused with "420 pixels vertical resolution".
In general, we return the FFmpeg pixel format name. We still use our own
old mechanism to keep a list of exceptions to provide compatibility for
a while.
Also, never return NULL for image format names. If the format is unset
(0/IMGFMT_NONE), return "none". If the format has no name (probably
never happens, FFmpeg seems to guarantee that a name is set), return
"unknown".
They were used by ancient libavcodec versions. This also removes the
need to distinguish vdpau image formats at all (since there is only
one), and some code can be simplified.
Image formats used to be FourCCs, so unsigned int was better. But now
it's annoying and the only difference is that unsigned int is more to
type than int.
Libav 9 still uses the unprefixed PIX_FMT_... symbols, but they will
probably be removed some time in the future.
There are some other deprecations we have yet to take care of, but
there are no clear replacements yet.
We got a crash in libavutil when encoding with Y8 (GRAY8). The reason
was that libavutil was copying an Y8 image allocated by us, and expected
a palette. This is because GRAY8 is a PSEUDOPAL format. It's not clear
what PSEUDOPAL means, and it makes literally no sense at all. However,
it does expect a palette allocated for some formats that are not
paletted, and libavutil crashed when trying to access the non-existent
palette.
PIX_FMT_* -> AV_PIX_FMT_* (except some pixdesc constants)
enum PixelFormat -> enum AVPixelFormat
Losen some version checks in certain newer pixel formats.
av_pix_fmt_descriptors -> av_pix_fmt_desc_get
This removes support for FFmpeg 1.0.x, which is even older than
Libav 9.x. Support for it probably was already broken, and its
libswresample was rejected by our build system anyway because it's
broken.
Mostly untested; it does compile with Libav 9.9.
PIX_FMT_VDA_VLD and PIX_FMT_VAAPI_VLD were never used anywhere. I'm not
sure why they were even added, and they sound like they are just for
compatibility with XvMC-style decoding, which sucks anyway.
Now that there's only a single vaapi format, remove the
IMGFMT_IS_VAAPI() macro. Also get rid of IMGFMT_IS_VDA(), which was
unused.
These formats are helpful for distinguishing surfaces with and without
alpha. Unfortunately, Libav and older version of FFmpeg don't support
them, so code will break. Fix this by treating these formats specially
on the mpv side, mapping them to RGBA on Libav, and unseting the alpha
bit in the mp_imgfmt_desc struct.
Decoding H264 using Video Decode Acceleration used the custom 'vda_h264_dec'
decoder in FFmpeg.
The Good: This new implementation has some advantages over the previous one:
- It works with Libav: vda_h264_dec never got into Libav since they prefer
client applications to use the hwaccel API.
- It is way more efficient: in my tests this implementation yields a
reduction of CPU usage of roughly ~50% compared to using `vda_h264_dec` and
~65-75% compared to h264 software decoding. This is mainly because
`vo_corevideo` was adapted to perform direct rendering of the
`CVPixelBufferRefs` created by the Video Decode Acceleration API Framework.
The Bad:
- `vo_corevideo` is required to use VDA decoding acceleration.
- only works with versions of ffmpeg/libav new enough (needs reference
refcounting). That is FFmpeg 2.0+ and Libav's git master currently.
The Ugly: VDA was hardcoded to use UYVY (2vuy) for the uploaded video texture.
One one end this makes the code simple since Apple's OpenGL implementation
actually supports this out of the box. It would be nice to support other
output image formats and choose the best format depending on the input, or at
least making it configurable. My tests indicate that CPU usage actually
increases with a 420p IMGFMT output which is not what I would have expected.
NOTE: There is a small memory leak with old versions of FFmpeg and with Libav
since the CVPixelBufferRef is not automatically released when the AVFrame is
deallocated. This can cause leaks inside libavcodec for decoded frames that
are discarded before mpv wraps them inside a refcounted mp_image (this only
happens on seeks).
For frames that enter mpv's refcounting facilities, this is not a problem
since we rewrap the CVPixelBufferRef in our mp_image that properly forwards
CVPixelBufferRetain/CvPixelBufferRelease calls to the underying
CVPixelBufferRef.
So, for FFmpeg use something more recent than `b3d63995` for Libav the patch
was posted to the dev ML in July and in review since, apparently, the proposed
fix is rather hacky.
This is based on the MPlayer VA API patches. To be exact it's based on
a very stripped down version of commit f1ad459a263f8537f6c from
git://gitorious.org/vaapi/mplayer.git.
This doesn't contain useless things like benchmarking hacks and the
demo code for GLX interop. Also, unlike in the original patch, decoding
and video output are split into separate source files (the separation
between decoding and display also makes pixel format hacks unnecessary).
On the other hand, some features not present in the original patch were
added, like screenshot support.
VA API is rather bad for actual video output. Dealing with older libva
versions or the completely broken vdpau backend doesn't help. OSD is
low quality and should be rather slow. In some cases, only either OSD
or subtitles can be shown at the same time (because OSD is drawn first,
OSD is prefered).
Also, libva can't decide whether it accepts straight or premultiplied
alpha for OSD sub-pictures: the vdpau backend seems to assume
premultiplied, while a native vaapi driver uses straight. So I picked
straight alpha. It doesn't matter much, because the blending code for
straight alpha I added to img_convert.c is probably buggy, and ASS
subtitles might be blended incorrectly.
Really good video output with VA API would probably use OpenGL and the
GL interop features, but at this point you might just use vo_opengl.
(Patches for making HW decoding with vo_opengl have a chance of being
accepted.)
Despite these issues, decoding seems to work ok. I still got tearing
on the Intel system I tested (Intel(R) Core(TM) i3-2350M). It was also
tested with the vdpau vaapi wrapper on a nvidia system; however this
was rather broken. (Fortunately, there is no reason to use mpv's VAAPI
support over native VDPAU.)
Move the decoder parts from vo_vdpau.c to a new file vdpau_old.c. This
file is named so because because it's written against the "old"
libavcodec vdpau pseudo-decoder (e.g. "h264_vdpau").
Add support for the "new" libavcodec vdpau support. This was recently
added and replaces the "old" vdpau parts. (In fact, Libav is about to
deprecate and remove the "old" API without deprecation grace period,
so we have to support it now. Moreover, there will probably be no Libav
release which supports both, so the transition is even less smooth than
we could hope, and we have to support both the old and new API.)
Whether the old or new API is used is checked by a configure test: if
the new API is found, it is used, otherwise the old API is assumed.
Some details might be handled differently. Especially display preemption
is a bit problematic with the "new" libavcodec vdpau support: it wants
to keep a pointer to a specific vdpau API function (which can be driver
specific, because preemption might switch drivers). Also, surface IDs
are now directly stored in AVFrames (and mp_images), so they can't be
forced to VDP_INVALID_HANDLE on preemption. (This changes even with
older libavcodec versions, because mp_image always uses the newer
representation to make vo_vdpau.c simpler.)
Decoder initialization in the new code tries to deal with codec
profiles, while the old code always uses the highest profile per codec.
Surface allocation changes. Since the decoder won't call config() in
vo_vdpau.c on video size change anymore, we allow allocating surfaces
of arbitrary size instead of locking it to what the VO was configured.
The non-hwdec code also has slightly different allocation behavior now.
Enabling the old vdpau special decoders via e.g. --vd=lavc:h264_vdpau
doesn't work anymore (a warning suggesting the --hwdec option is
printed instead).
This caused all formats with fewer than 8 bits per component marked as
little endian. (Normally, only some messed up packed RGB formats are
endian-specific in this case.)
Options that take pixel format names now also accept ffmpeg names.
mpv internal names are preferred. We leave this undocumented
intentionally, and may be removed once libswscale stops printing
ffmpeg pixel format names to the terminal (or if we stop passing the
SWS_PRINT_INFO flag to it, which makes it print these).
(We insist on keeping the mpv specific names instead of dropping them
in favor of ffmpeg's name due to NIH, and also because ffmpeg always
appends the endian suffixes "le" and "be".)
This field contained the "average" bit depth per pixel. It serves no
purpose anymore. Remove it.
Only vo_opengl_old still uses this in order to allocate a buffer that is
shared between all planes.
This used to mean that there is more than one plane. This is not very
useful: IMGFMT_Y8 was not considered planar, but it's just a Y plane,
and could be treated the same as actual planar formats. On the other
hand, IMGFMT_NV12 is partially packed, and usually requires special
handling, but was considered planar.
Change its meaning. Now the flag is set if the format has a separate
plane for each component. IMGFMT_Y8 is now planar, IMGFMT_NV12 is not.
As an odd special case, IMGFMT_MONO (1 bit per pixel) is like a planar
RGB format with a single plane.
Remove the strange things the old mp_image_setfmt() code did to the
image format parameters. This includes setting chroma shift to 31 for
gray (Y8) formats and more.
Y8 + vo_opengl_old didn't actually work for unknown reasons (regression
in this branch). Fix this. The difference is that Y8 is now interpreted
as gray RGB (LUMINANCE texture) instead of involving YUV (and levels)
conversion.
Get rid of distinguishing RGB and BGR. There wasn't really any good
reason for this.
Remove mp_get_chroma_shift() and IMGFMT_IS_YUVP16*(). mp_imgfmt_desc
gives the same information and more.
