This commit adds an --audio-channel=auto-safe mode, and makes it the
default. This mode behaves like "auto" with most AOs, except with
ao_alsa. The intention is to allow multichannel output by default on
sane APIs. ALSA is not sane as in it's so low level that it will e.g.
configure any layout over HDMI, even if the connected A/V receiver does
not support it. The HDMI fuckup is of course not ALSA's fault, but other
audio APIs normally isolate applications from dealing with this and
require the user to globally configure the correct output layout.
This will help with other AOs too. ao_lavc (encoding) is changed to the
new semantics as well, because it used to force stereo (perhaps because
encoding mode is supposed to produce safe files for crap devices?).
Exclusive mode output on Windows might need to be adjusted accordingly,
as it grants the same kind of low level access as ALSA (requires more
research).
In addition to the things mentioned above, the --audio-channels option
is extended to accept a set of channel layouts. This is supposed to be
the correct way to configure mpv ALSA multichannel output. You need to
put a list of channel layouts that your A/V receiver supports.
mixer.c didn't really deserve to be separate anymore, as half of its
contents were unnecessary glue code after recent changes. It also
created a weird split between audio.c and af.c due to the fact that
mixer.c could insert audio filters. With the code being in audio.c
directly, together with other code that unserts filters during runtime,
it will be possible to cleanup this code a bit and make it work like the
video filter code.
As part of this change, make the balance code work like the volume code,
and add an option to back the current balance value. Also, since the
balance semantics are unexpected for most users (panning between the
audio channels, instead of just changing the relative volume), and there
are some other volumes, formally deprecate both the old property and the
new option.
Drop the code for switching the volume options and properties between
af_volume and AO volume controls. interface-changes.rst mentions the
changes in detail.
Do this because this was exceedingly complex and had other problems as
well. It was also very hard to test. It's just not worth the trouble.
Some leftovers like AOCONTROL_HAS_PER_APP_VOLUME will be removed at a
later point.
Fixes#3322.
We have a warning mechanism for removed and for replaced options, but
none yet for options which have been simply deprecated.
For the following commit.
(Fun fact: just adding the m_option field increases binary size by
14KB.)
Instead of having 9 different properties, requiring 18 different
VOCTRLs to read them all, they are now exposed as a single property.
This is not only cleaner (since they're all together) but also allows
querying all 9 of them with only a single VOCTRL (by using
mp.get_property_native).
(The extra factor of 2 was due to an extra query being needed to get the
type, which is now also unnecessary)
This makes it much easier to access performance metrics from within a
lua script, and also makes it easier to just show a readable, formatted
version via show-text.
Enable m_sub_options_copy() to copy nested sub-options, and also enable
it to create an option struct from defaults. We can get rid of most of
the crap in assign_options() now.
Calling handle_scaler_opt() to get a static allocation for scaler name
is still needed. It's moved to reinit_scaler(), which seems to be a
better place for it. Without it, dangling pointers could be created when
options are changed. (And in fact, this fixes possible dangling pointers
for window.name.) In theory we could create a dynamic copy, but that
seemed even more messy.
Chance of regressions.
Center window position after applying W and H parameters of the --geometry
option. Passing valid X and Y values will still override the position.
Fixes#2397.
This uses the normal autoprobing rules like "auto", but rejects anything
that isn't flagged as copying data back to system memory.
The chunk in command.c was dead code, so remove it instead of updating
it.
Add --taskbar-progress command line option and property which controls taskbar
progress indication rendering in Windows 7+. This option is on by default and
can be toggled during playback.
This option does not affect the creation process of ITaskbarList3. When the
option is turned off the progress bar is just hidden with TBPF_NOPROGRESS.
Closes#2535
Options/properties that are choices, and which include "yes" or "no"
values (or both) can now be read and written as MPV_FORMAT_FLAG.
For write access, rejecting flags in these cases was obnoxiously
unintuitive and inconvenient.
For read access, the value of this is less convincing, and actually it's
a major API change. At this point I probably have to admit that the
finer details of the client API are very unstable.
The "fs-only" choice sets the _NET_WM_BYPASS_COMPOSITOR to 1 if the
window is fullscreened, and 0 otherwise. (0 is specified to be the
implicit default - i.e. no change is requested in windowed mode.)
In particular, change the default to "fs-only".
Fixes#2582.
Flag that is set by default. Reseting it will result in mpv trying to fit
client area with video instead of the whole window with border and
decorations on the screen.
Marked as (Windows only) for now until it's implemented on other platforms.
--sub-ass=no / --ass=no still work, but --ass-style-override=strip is
preferred now. With this change, --ass-style-override can control all
the types of style overriding.
This uses ID3D11VideoProcessor to convert the video to a RGBA surface,
which is then bound to ANGLE. Currently ANGLE does not provide any way
to bind nv12 surfaces directly, so this will have to do.
ID3D11VideoContext1 would give us slightly more control about the
colorspace conversion, though it's still not good, and not available
in MinGW headers yet.
The video processor is created lazily, because we need to have the coded
frame size, of which AVFrame and mp_image have no concept of. Doing the
creation lazily is less of a pain than somehow hacking the coded frame
size into mp_image.
I'm not really sure how ID3D11VideoProcessorInputView is supposed to
work. We recreate it on every frame, which is simple and hopefully
doesn't affect performance.
Commit a9bd4535 generally changed properties are set to string values.
This actually broke the fallback for non-string properties, because the
set string action was redirected directly to the property, instead of
the generic handler and its fallback code.
If a mpv_node wrapped a string, the behavior was different from calling
mpv_set_property() with MPV_FORMAT_STRING directly. Change this.
The original intention was to be strict about types if MPV_FORMAT_NODE
is used. But I think the result was less than ideal, and the same change
towards less strict behavior was made to mpv_set_option() ages ago.
It's pretty "unfriendly" and causes too many issues. (Probably. At least
they're more obvious to a user than e.g. broken frame timing.)
Potentially we could apply heuristics like applying this only on
fullscreen, but let's not. It's up to the user to configure this to
get best results.
Fixes#2997.
This commit adds the d3d11va-copy hwdec mode using the ffmpeg d3d11va
api. Functions in common with dxva2 are handled in a separate decode/d3d.c
file. A future commit will rewrite decode/dxva2.c to share this code.
JSON IPC works on Windows now, and although the transports for each
plaform have similar characteristics, they unfortunately have different
names (Unix domain sockets on Linux/Unix vs. named pipes on Windows.)
Hopefully this change better reflects the purpose of the option too,
since with --input-ipc-server, mpv acts as an IPC server that can
service many simultaneous clients (as opposed to --input-file, which can
only do one-to-one IPC.)
See --lavfi-complex option.
This is still quite rough. There's no support for dynamic configuration
of any kind. There are probably corner cases where playback might freeze
or burn 100% CPU (due to dataflow problems when interaction with
libavfilter).
Future possible plans might include:
- freely switch tracks by providing some sort of default track graph
label
- automatically enabling audio visualization
- automatically mix audio or stack video when multiple tracks are
selected at once (similar to how multiple sub tracks can be selected)
This is probably the 3rd time the user-visible behavior changes. This
time, switch back because not normalizing seems to be the more expected
behavior from users.
Too many problems. Well, actually it's just Linux audio systems which
cause problems, and exclusive audio access on other platforms.
In any case, it seems you have to do some manual configuration if you
want multichannel audio output.
This is labeled as "name of the service in broadcasting (channel name)"
and exported as a generic tag by avformat-demuxers, notably lavf
when handling mpegts-streams from DVB.
If you do "mpv /bla/", and then branch out into sub-directories using
playlist navigation, and then used quit and watch later, then playing
the same directory did not resume from the previous point. This was
because resuming is based on the path hash, so a path prefix can't be
detected when resuming the parent directory.
Solve this by writing each path prefix when playing directories is
involved. (This includes all parent paths, so interestingly, "mpv /"
would also resume in the above example.)
Something like this was requested multiple times, and I want it too.
Requested. It works like --sub-paths. This will also load audio files
from a "audio" sub directory in the config file (because the same code
as for subtitles is used, and it also had such a feature).
Fixes#2632.
This is only for specific Hauppage cards. According to the comments in
who is actively using this feature. Get it out of the way.
Anyone who still wants to use this should complain. Keeping this code
would not cause terribly much additional work, and it could be restored
again. (But not if the request comes months later.)
Most of this is explained in the DOCS additions.
This gives us slightly more sanity, because there is less interaction
between the various parts. The goal is getting rid of the video_offset
entirely.
The simplification extends to the user API. In particular, we don't need
to fix missing parts in the API, such as the lack for a seek command
that seeks relatively to the start time. All these things are now
transparent.
(If someone really wants to know the real timestamps/start time, new
properties would have to be added.)
They are evil and should be eradicated. Some of these were pretty dumb
anyway.
There are probably some more around in platform specific code or other
code not enabled by default on Linux.
Update msg.c state immediately if a terminal or logging setting is set.
Until now, this was delayed until mp[v]_initialize() was called. When
using the client API, you could easily miss logged error messages, even
when logging was initialized early on by calling
mpv_request_log_messages().
(Properties can't be used for this either, because properties do not
work before mpv_initialize().)
Thanks to rcombs, ffmpeg now properly supports DASH and we can
remove our hacks for it and use it by default whenever
available. If you don't like this for whatever reason, you
can get the "normal" streams back with --ytdl-format=best .
Closes#579Closes#1321Closes#2359
Useless. Sometimes it might be useful to make some extremely broken
files work, but on the other hand --no-correct-pts is sufficient for
these cases.
While we still need some of the code for AVI, the "auto" mode in
particular inflated the size of the code.
The manpage entry explains this.
(Maybe this option could be always enabled and removed. I don't quite
remember what valid use-cases there are for just disabling audio
entirely, other than that this is also needed for audio decoder init
failure.)
The vf_format suboption is replaced with --video-output-levels (a global
option and property). In particular, the parameter is removed from
mp_image_params. The mechanism is moved to the "video equalizer", which
also handles common video output customization like brightness and
contrast controls.
The new code is slightly cleaner, and the top-level option is slightly
more user-friendly than as vf_format sub-option.
VideoToolbox is preferred. Now that FFmpeg released 2.8, there's no
reason to support VDA anymore. In fact, we had a bug that made VDA not
useable with older FFmpeg versions in some newer mpv releases.
VideoToolbox is supported even on slightly older OSX versions, and if
not, you still can run mpv without hw decoding.
The "PWD" enviornment variable is described by POSIX. We don't go to
length to verify its contents, but just trust it.
This affects the logic for resuming playback.
This was completely broken. It was checked manually in some config
loading paths, so it appeared to work. But the intention was always to
completely disable reading from the normal config dir. This logic was
broken in commit 2263f37d.
The manual checks are actually redundant, and are not needed if
--no-config is implemented properly - remove them.
Additionally, the change to load the libmpv defaults from an embedded
profile also failed to set "config=no". The option is marked as not
being settable by a config file, and the libmpv default profile is
parsed as a config file, so this option was rejected. Fix it by removing
the CONF_NOCFG flag. (Alternatively, m_config_set_profile() could be
changed not to set the "config file" flag by default, but I'm not
bothering with this.)
If this mode is enabled, the player tries to strictly synchronize video
to display refresh. It will adjust playback speed to match the display,
so if you play 23.976 fps video on a 24 Hz screen, playback speed is
increased by approximately 1/1000. Audio wll be resampled to keep up
with playback.
This is different from the default sync mode, which will sync video to
audio, with the consequence that video might skip or repeat a frame once
in a while to make video keep up with audio.
This is still unpolished. There are some major problems as well; in
particular, mkv VFR files won't work well. The reason is that Matroska
is terrible and rounds timestamps to milliseconds. This makes it rather
hard to guess the framerate of a section of video that is playing. We
could probably fix this by just accepting jittery timestamps (instead
of explicitly disabling the sync code in this case), but I'm not ready
to accept such a solution yet.
Another issue is that we are extremely reliant on OS video and audio
APIs working in an expected manner, which of course is not too often
the case. Consequently, the new sync mode is a bit fragile.
Since we're on the topic of consistency, I've seen multiple users
complain about the presence of this period, which does not really match
other programs' behavior.
Add --demuxer-max-packets and --demuxer-max-bytes, which control the
maximum size of the packet queue. These can be helpful to avoid
excessive memory usage.
Memory usage is the reason why there's a limit in the first place. If a
file is more or less broken, and audio and video don't line up, the
decoders will fill up the packet queue trying to read more audio or
video, and the maximum sizes are required to avoid unbounded memory
allocation. Being able to override the maximum sizes is useful; either
for restricting memory usage further, or enlarging the sizes when
attempting to play various broken files.
Remove --demuxer-readahead-packets and --demuxer-readahead-bytes. These
were a bit useless. They could force a minimum packet queue size, but
controlling the queue size with --demuxer-readahead-secs is much nicer.
It's fairly certain nobody ever used these options.
VDA is being deprecated in OS X 10.11 so this is needed to keep hwdec working.
The code needs libavcodec support which was added recently (to FFmpeg git,
libav doesn't support it).
Signed-off-by: Stefano Pigozzi <stefano.pigozzi@gmail.com>
Allow setting an arbitrary amount, instead of the fixed 50%.
This is nto striclty backwards compatible. The defaults don't change,
but the --cache/--cache-default options now set the readahead portion.
So in practice, users who configured this until now will see the
double amount of cache being used, _plus_ the 75MB default backbuffer
will be in use.
Probably makes users happy who want bitmap subtitles to show up in the
screen margins, and stops them from doing idiotic crap with vf_expand.
Fixes#2098.
Until now, if a stream wasn't seekable, but the stream cache was enabled
(--cache), we've enabled seeking anyway. The idea was that at least
short seeks would typically fall within the cache. And if not, the user
was out of luck and terrible things happened. In other words, it was
unreliable.
Be stricter about it and remove this behavior. Effectively, this will
for example disable seeking in piped data.
Instead of trying to be clever, add an --force-seekable option, which
will always enable seeking if the user really wants it.
See manpage additions. This is mainly useful for vo_opengl_cb, but can
also be applied to vo_opengl.
On a side note, gl_hwdec_load_api() should stop using a name string, and
instead always use the IDs. This should be cleaned up another time.
Now there's a "canonical" table for mapping the names, that other code
can use, without having to rely too much on option code magic.
Also, use the central HWDEC constants, instead of magic values. (There
used to be semi-ok reasons to do this, but now it makes no sense
anymore.)
This flags stuff tried to be too clever - if there are overlapping flags
(e.g. exclusive or combined flags), the one matching with most bits has
to be chosen.
This fixes logging of the seek command. E.g. "relative" and "absolute"
overlap to make them exclusive, but "relative" was always printed as it
happened to match first.
This provides a new method for enabling spdif passthrough. The old
method via --ad (--ad=spdif:ac3 etc.) is deprecated. The deprecated
method will probably stop working at some point.
This also supports PCM fallback. One caveat is that it will lose at
least 1 audio packet in doing so. (I don't care enough to prevent this.)
(This is named after the old S/PDIF connector, because it uses the same
underlying technology as far as the higher level protoco is concerned.
Also, the user should be renamed that passthrough is backwards.)
This brings the volume control closer to what is percepted as linear
volume change.
Adjust the --softvol-max default to roughly the old maximum (roughly
doubles the gain).
Now --volume takes an absolute volume, meaning it doesn't depend on
--softvol-max. 0 is still silence, and 100 now always means unchanged
volume. The OSD and the "volume" property are changed accordingly.
Also raise the minimum value of --softvol-max. A value below 100 makes
no sense and breaks the OSD.
Adding a "yes" choice makes the option parser consider this option as a
multi-state flag option, and without argument "yes" is implicitly
selected. "yes" is made an alias for "inf", so it will loop infinitely.
As a negative side effect, the old syntax "-loop inf" does not work
anymore. Since this is ambiguous, the option parser prefers interpreting
the "inf" as filename.
Fixes#1970.
mp_find_config_file() will print the filename lookup and its result in
verbose mode. This is wanted, but gets inconvenient when it is done for
every playlist entry (for resuming).
Lookup the watch_later subdir only once and cache the result instead.
This drops the logic for loading the resume file from other locations,
which should generally be unnecessary, though might lead to confusion if
the user has mixed old and new config paths (which the user shouldn't).
Also add a mp_find_user_config_file() function for a more
straightforward and reliable way to get actual local configpaths,
instead of possibly global and unwritable locations.
Also, for symmetry, check the resume option in mp_load_playback_resume()
just like mp_check_playlist_resume() does.
Share most of the implementation of config file lookup between
mp_find_all_config_files() and mp_find_config_file().
Also move the check for config path overrides to mp_get_platform_path()
directly. From the point of view of config file lookup, this is a bit
stupid, but on the other hand increases consistency, as user path
resolution exposes the mp_get_platform_path() functionality directly to
the user.
This creates the window before the first file is loaded. This was
requested a bunch of times, but on the other hand a change to make this
behavior the default was reverted some time ago, because other users
hated it.
Since commit 7381db60, strings like "~desktop/" were expanded as
platform-specific paths by mpv. Apparently this similarity to standard
Unix shell expansion caused confusion, so change it to "~~desktop/". The
shell doesn't expand this, so it should be better.
So that the user realizes where they come from, or can find them at all.
This was a common complaint, and this is the most lazy solution. Better
suggestions for a default template are welcome.
Somewhat less ifdeffery, higher flexibility. Now there are 3 separate
config file resolvers for 3 platforms (unix, win, osx), and they can
still interact with each other somewhat. For example, OSX for now uses
most of Unix, but adds the OSX bundle path.
This can be extended to resolve very specific platform paths, such as
location of the desktop.
Most of the Unix specific code moves to path-unix.c.
The behavior should be the same - if not, it is likely a bug.
If the --ytdl-format option is not used, force the "best" format. Do
this because youtube-dl is going to change its default format to one
that will trigger the (partially broken) DASH support in our own code.
Fixes#1867.
This was traditionally needed to silence terminal output from errors
during command line parsing preparsing. Preparsing is done so that
options controlling the terminal and config files are parsed and applied
first, with a second command line parsing pass applying all other
options, _and_ printing error messages for the preparsed ones.
But the hack silencing log output during the preparse pass is actually
not needed anymore, since the terminal is enabled only after preparsing
is finished. update_logging() in main.c does this.
So as long as update_logging() is called before
m_config_preparse_command_line(), this will work.
The options don't change, but they're now declared and used privately by
demux_mkv.c. This also brings with it a minor refactor of the subpreroll
seek handling - merge the code from playloop.c into demux_mkv.c. The
change in demux.c is pretty much equivalent as well.
Useful for dealing with libavfilter's terrible graph syntax.
Not strictly backwards compatible (for example "[a[b]" fails now - the
"[" within the quote is interpreted now). But hopefully it's obscure
enough not to warrant any kind of compatibility hacks.
It seems this choice was never documented. "always" is actually older
than "yes", so just declare it a compatibility value for "yes". (Also
move it before "always" in the C code to make this clear.)
It was ignored before. Passing an argument makes no sense, and might be
mistaken for some form of --vf-del, so complain about it.
This also affects --af-clr and the vf/af commands.
The format doesn't change. Some details are different, though. For
example, it will now accept option values with spaces even if they're
not quoted. (I see no reason why the user should be forced to add
quotes.)
The code is now smaller and should be much easier to extend. It also
can load config from in-memory buffers, which might be helpful in the
future.
read_file() should eventually be replaced with stream_read_complete().
But since the latter function may access options under various
circumstances, and also needs access to the mpv_global struct, there
is a separate implementation for now.
Use OPT_CHOICE_C() instead of the custom parser. The functionality is
pretty much equivalent.
(On a side note, it seems --video-stereo-mode can't be removed, because
it controls whether to "reduce" stereo video to mono, which is also the
default. In fact I'm not sure how this should be handled at all.)
Remove the colorspace-related top-level options, add them to vf_format.
They are rather obscure and not needed often, so it's better to get them
out of the way. In particular, this gets rid of the semi-complicated
logic in command.c (most of which was needed for OSD display and the
direct feedback from the VO). It removes the duplicated color-related
name mappings.
This removes the ability to write the colormatrix and related
properties. Since filters can be changed at runtime, there's no loss of
functionality, except that you can't cycle automatically through the
color constants anymore (but who needs to do this).
This also changes the type of the mp_csp_names and related variables, so
they can directly be used with OPT_CHOICE. This probably ended up a bit
awkward, for the sake of not adding a new option type which would have
used the previous format.
This requires FFmpeg git master for accelerated hardware decoding.
Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav
will also work.
Most things work. Screenshots don't work with accelerated/opaque
decoding (except using full window screenshot mode). Subtitles are
very slow - even simple but huge overlays can cause frame drops.
This always uses fullscreen mode. It uses dispmanx and mmal directly,
and there are no window managers or anything on this level.
vo_opengl also kind of works, but is pretty useless and slow. It can't
use opaque hardware decoding (copy back can be used by forcing the
option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend
is preferred over the X11 ones in case you're trying on X11; but X11
is even more useless on RPI.
This doesn't correctly reject extended h264 profiles and thus doesn't
fallback to software decoding. The hw supports only up to the high
profile, and will e.g. return garbage for Hi10P video.
This sets a precedent of enabling hw decoding by default, but only
if RPI support is compiled (which most hopefully it will be disabled
on desktop Linux platforms). While it's more or less required to use
hw decoding on the weak RPI, it causes more problems than it solves
on real platforms (Linux has the Intel GPU problem, OSX still has
some cases with broken decoding.) So I can live with this compromise
of having different defaults depending on the platform.
Raspberry Pi 2 is required. This wasn't tested on the original RPI,
though at least decoding itself seems to work (but full playback was
not tested).
There's actually no reason why we should assert. It's unexpected and
"should" not happen, but actually there are several ways to make it
happen.
Still, add a check m_config_get_co(), to avoid matching pseudo-entries
with no name.
Pretty messy, which is why it wasn't done at first. (Also, I'd really
like to have simpler syntax and semantics for this damn option, but who
knows when this will happen.)
Fixes#1705.
Why did this exist in the first place? Other than being completely
useless, this even caused some regressions in the past. For example,
there was the case of a laptop exposing its accelerometer as joystick
device, which led to extremely fun things due to the default mappings of
axis movement being mapped to seeking.
I suppose those who really want to use their joystick to control a media
player (???) can configure it as mouse device or so.
I think this is what I alwass missed ever since I found the MPlayer
cache options: a way to enable the cache on local files with the default
settings, whatever they are.
main() being called with argc==0 is probably possible. Fix by skipping
the program name early. (I already changed and reverted this once, but
this time we make sure that it's less likely to confuse the skipped argv
with main()'s argv by naming it "options".)
In the past it happened quite often that flag options (yes/no) were
changed to choice options (yes/no/some more). The problem with this was
that while flag options don't need a parameter, this wasn't the case
with choice options. A hack was introduced to compensate for this:
setting M_OPT_OPTIONAL_PARAM on the option, and an empty string ("") was
added as choice, so that the choice could be used like a flag. So, for
example, "--mute" would set the choice "".
Fix this by 1. not requiring a parameter if there's a "yes" choice, and
2. redirect an empty parameter to "yes". The effect is that a choice
option with the choices ["yes", "no"] is pretty much equivalent to a
flag option.
Now that we have fast stream switching, we can bump these sizes, as the
queues cause no delay in switching anymore.
Of course, the fast stream switching works for mkv and mp4 only. Other
formats will incur a quite terrible delay especially in network mode,
which this commit changes to 10 seconds. Let's see if someone
complains...
This option allows the user to pass non-supported options directly to
youtube-dl, such as "--proxy URL", "--username USERNAME" and
'--password PASSWORD".
There is no sanity checking so it's possible to break things (i.e.
if you pass "--version" mpv exits with random JSON error).
Signed-off-by: wm4 <wm4@nowhere>
