Makes sure that seeking to a given time position shows the subtitle at
that position. This can fail if the subtitle packet is not close enough
to the seek target. Always enabled for hr-seeks, and can be manually
enabled for normal seeks with --mkv-subtitle-preroll.
This helps displaying subtitles correctly with ordered chapters. When
switching ordered chapter segments, a seek is performed. If the subtitle
is timed slightly before the start of the segment, it normally won't be
demuxed. This is a problem with all seeks, but in this case normal
playback is affected. Since switching segments always uses hr-seeks,
the code added by this commit is always active in this situation.
If no subtitles are selected or the subtitles come from an external
file, the demuxer should behave exactly as before this commit.
In the last cleanup round, this was accidentally changed from a store
option to int, and the option value was passed as flag value.
(Not that anyone needs/uses/cares about this option...)
The main problem with video PTS was that it wasn't very useful when
playing audio files with cover art. Using the audio time instead was an
obvious solution. Unfortunately, this leads to "inexact" reporting of
the playback time in paused mode, and audio is always ahead by small,
essentially random amounts of time ahead. This is possibly because the
times reported by AOs are not entirely accurate when paused (see commit
9b3bf76).
Switch back to video PTS, and use a simpler way to deal with the cover
art case: if the video has ended, use the audio PTS.
Also see commit f9a259e (and the commits referenced from there).
Trying to step over a segment boundary didn't work, and the video was
stuck at the end of the current chapter. At this point, both video and
audio of the segment has ended, and the segment switching code is going
to call seek() to go to the next segment (the part of the code in
run_playloop that uses end_is_chapter). However, this seek() is not
called if playback is paused, and the framestepping code always paused
before this code is run.
Move the framestepping code below the chapter switching code. The added
restart_playback condition makes sure the code is called only after at
least one video frame has been shown. Also don't reset the framestep
counter after seek. It's not needed, and removing it prevents full
unpausing when stepping over a segment boundary.
This also terminates playback when frame stepping at the end of the
file. The --keep-open option can be used to get the old behavior.
The OSX part of the Apple Remote was unmaintained for a long time and was not
working anymore. I tried to update the cookies to what the current versions of
OS X expect without much luck. I decided to remove it since Apple is not
including the IR receiver anymore in new hardware and it's clear that wifi
based remotes are the way to go.
A third party iOS app should be used in it's place. In the future we could look
into having a dedicated iOS Remote Control app like VLC and XBMC do.
The Linux side (`appleir.c`) was relatively tidy but it looks like LIRC can be
configured to work with any version of Apple Remote [1] and is more maintained.
[1] LIRC Apple Remote configs: http://lirc.sourceforge.net/remotes/apple/
Drawing the bar with vector drawings (instead with characters from the
OSD font) offers more flexibility and looks better. This also adds
chapter marks to the OSD bar, which are visible as small triangles on
the top and bottom inner border of the bar.
Change the default position of the OSD bar below the center of the
screen. This is less annoying than putting the bar directly into the
center of the view, where it obscures the video. The new position is
not quite on the bottom of the screen to avoid collisions with
subtitles.
The old centered position can be forced with ``--osd-bar-align-y=0``.
Also make it possible to change the OSD bar width/height with the new
--osd-bar-w and --osd-bar-h options.
It's possible that the new OSD bar renders much slower than the old
one. There are two reasons for this: 1. the character based bar
allowed libass to cache each character, while the vector drawing forces
it to redraw every time the bar position changes. 2., the bar position
is updated at a much higher granularity (the bar position is passed
along as float instead of as integer in the range 0-100, so the bar
will be updated on every single video frame).
gl_video.c contains all rendering code, gl_lcms.c the .icc loader and
creation of 3D LUT (and all LittleCMS specific code). vo_opengl.c is
reduced to interfacing between the various parts.
Makes the code a bit simpler to follow, at least in the "modern"
decoding path (update_video_nocorrect_pts() is used with old demuxers,
which don't return proper packets and need further parsing, so this code
looks less simple now).
There were complaints that ${fps} was printed as e.g. "23.98" instead of
"23.976". Since there's no way to format floats exactly _and_ in a user-
friendly way, just change the default precision for printing floats.
This way it's possible to retrieve correct information about video, like
actual width/height, which in general are available only after at least
one frame has been sent to the video output, such as dwidth/dheight.
mpv_identify.sh becomes a bit slower, because we let it decode enough
audio and video to fill the audio buffers and to send one frame to the
video output. Also, --playing-msg isn't shown anymore with --frames=0
(could be fixed by special-casing it, should this break any use cases).
Note that in some corner cases, like when the demuxer for some reason
returns lots of audio packets but no video packets at the start, but
video actually starts later, the --playing-msg will still be output
before video starts.
This has the same (useless) definition as frame stepping in audio-only
mode: one frame means one playloop iteration. (It's relatively useless,
because one playloop iteration has a random duration. But it makes
--frames=1 work, which is useful again.)
Add new properties "dwidth" and "dheight", which contain the video
size as known by the VO (not necessarily what the VO makes out of them,
i.e. without window scaling and panscan).
Some time ago, all old special-cased commands (like "volume 1" to change
volume by one) have been removed. These commands are still emulated
using simple text replacement. This emulation is done to not break
everyone's input.conf, especially because the input.conf provided by
standard mplayer* still uses the old commands.
Every use of a deprecated command prints a replacement warning, which
was visible only with -v. Make these warnings visible by default.
There's actually not much reason to do this, but since commands like
"volume 5 1" don't work anymore, it's better to be verbose about this.
Also simplify the replacement for "vo_fullscreen".
Normal text was set to gray foreground color. This didn't work for
terminals with white background.
Instead of setting a color for normal text, reset the color attributes.
This way, only errors and warnings are formatted differently.
Also change the default color for MSGL_HINT from bold white to yellow.
A recent change accidentally set the flags options to -1 (probably
confusing it with the defasult value?), which mistakenly set all flags
and rejected all option values (except 0).
We consider FFmpeg 1.x and Libav 0.9.x releases compatible. Support
for FFmpeg 0.9.x and Libav 0.8.x is considered infeasible and has been
dropped in the previous commits. The bits that break compatibility are
mainly the CodecID renaming (trivial, but would require nasty hacks
everywhere), the avcodec_encode_video2() function (missing in older
releases, mandatory in newer ones), and the resampler changes (older
releases miss lib{av,sw}resample, newer versions removed the
libavcodec resampler).
Remove some other compatibility bits that were needed to for releases
for which we drop support.
The comment about Libav 0.9 in compat/libav.h is incorrect and should
have been 0.8 (the symbol is present in Libav 0.9).
The old names have been deprecated a while ago, but were needed for
supporting older ffmpeg/libav versions. The deprecated identifiers
have been removed from recent Libav and FFmpeg git.
This change breaks compatibility with Libav 0.8.x and equivalent
FFmpeg releases.
Move them into per-instance structs. This should get rid of all global
variables in mplayer.c (not counting those referenced by cfg-mplayer.h).
In core/input/ar.c, just remove checking the slave_mode variable. I'm
not sure what this code was supposed to achieve, but slave mode is
broken, slave mode is actually infeasible on OSX (ar.c is completely OSX
specific), and the correct way of doing this would be to disable this
input device per command line switch.
Missing entries cause avcodec_descriptor_get() to return NULL, and in
turn mp_codec_from_av_codec_id() will return NULL. This shouldn't
happen, and avcodec_descriptor_get() returning NULL for a valid codec is
clearly a bug.
But make it more robust anyway, and use the decoder's name if this
happens, because I doubt maintainance of the AVCodecDescriptor table
in ffmpeg/Libav will always be perfect and reliable.
Latest nvidia drivers ignore the application setting, so this switch
makes even less sense than before. It's still possible to control this
with VO specific suboptions.
Separate the video output options from the big MPOpts structure and also only
pass the new mp_vo_opts structure to the vo backend.
Move video_driver_list into mp_vo_opts
The spdif decoder was hardcoded to assume that the spdif output is
capable of accepting high (>1.5Mbps) bitrates. While this is true
for modern HDMI spdif interfaces, the original coax/toslink system
cannot deal with this and will fail to work.
This patch adds an option --dtshd which can be enabled if you use
a DTS-capable receiver behind a HDMI link.
Removes almost every global variabel in vo.h and puts them in a special struct
in MPOpts for video output related options.
Also we completly remove the options/globals pts and refresh rate because
they were unused.
When paused, --cursor-autohide worked with a precision of 500ms, which
is the main loop's default sleep time when paused. Cursor hiding is
polled in x11_common, and the main loop never called the X11 code at
the right time. Fix this by allowing the VO to set a time when it
should be called next.
Emulate percentage-seeks (SEEK_FACTOR) as normal time-seeks if possible.
This fixes some issues with (let's call it) low quality implementations
of SEEK_FACTOR (e.g. demux_mkv basically interprets this as byte-seek,
and also seeking to 99.9% makes it seek back to the start).
For weird MPEG formats the demuxer level SEEK_FACTOR is still used.
These formats, which can have timestamp resets, are identified by
setting demuxer->ts_resets_possible to true.
Also, have get_current_pos_ratio() follow the same rules, and calculate
the percentage position with the file position if timestamp resets are
possible.
This actually fixes percentage-seeks in .ts files with demux_lavf.c.
This kind of seek is not really used now, but it will be more important
when we add a progress bar.
Note: seeking in chained ogg files is still completely broken. The main
issue is that ffmpeg doesn't provide a sane API for dealing with
timestamp resets, and trying to do byte seeks with ogg confuses demuxer
and decoder (or something like this) and just does random things.
(Tested with two concatenated flac-in-ogg files).
OPT_BASE_STRUCT defines which struct the OPT_ macros (like OPT_INT etc.)
reference implicitly, since these macros take struct member names but no
struct type. Normally, only cfg-mplayer.h should need this, and other
places shouldn't be bothered with having to #undef it.
(Some files, like demux_lavf.c, still store their options in MPOpts. In
the long term, this should be removed, and handled like e.g. with VO
suboptions instead.)
Change the option definition macros so that they cause compiler warnings
if the type of the referenced option struct member doesn't match the
type implied by the macro. The compiler warning printed isn't very
telling, but it's better than silently invoking undefined behavior by
violating the C strict aliasing rules.
Also fix some minor cases that violate the type rules. For the option
"no-aspect" we have to add a new option type to handle it properly.
Some option types are hard to check, so we don't in these cases.
VFCAP_OSD was used to determine at runtime whether the VO supports OSD
rendering. This was mostly unused. vo_direct3d had an option to disable
OSD (was supposed to allow to force auto-insertion of vf_ass, but we
removed that anyway). vo_opengl_old could disable OSD rendering when a
very old OpenGL version was detected, and had an option to explicitly
disable it as well.
Remove VFCAP_OSD from everything (and some associated logic). Now the
vo_driver.draw_osd callback can be set to NULL to indicate missing OSD
support (important so that vo_null etc. don't single-step on OSD
redraw), and if OSD support depends on runtime support, the VO's
draw_osd should just do nothing if OSD is not available.
Also, do not access vo->want_redraw directly. Change the want_redraw
reset logic for this purpose, too. (Probably unneeded, vo_flip_page
resets it already.)
Use floats instead of integers in the range 0-100. Currently, the OSD
is currently made up of 46 elements so no change should be visible, but
rendering of the bar will be changed later to use vector drawings (using
pixel coordinates) instead of glyphs. This commit is for preparation.
The percent position is used for the OSD, the status line, and for the
OSD bar (shown on seeks). By default, the PTS of the last demuxed packet
was used to calculate it. This led to a "jumpy" display when the
percentage value (casted to int) was changing. The reasons for this were
the presence of video frame reordering (packet PTS is not monotonic), or
getting PTS values from different streams (like audio/subs).
Since these rely on PTS values and correct file durations anyway,
simplify it by calculating it with the current playback position in
mplayer.c instead.
This allowed making the player switch the monitor video mode when
creating the video window. This was a questionable feature, and with
today's LCD screens certainly not useful anymore. Switching to a random
video mode (going by video width/height) doesn't sound too useful
either.
I'm not sure about the win32 implementation, but the X part had several
bugs. Even in mplayer-svn (where x11_common.c hasn't been receiving any
larger changes for a long time), this code is buggy and doesn't do the
right thing anyway. (And what the hell _did_ it do when using multiple
physical monitors?)
If you really want this, write a shell script that calls xrandr before
and after calling mpv.
vo_sdl still can do mode switching, because SDL has native support for
it, and using it is trivial. Add a new sub-option for this.
The message reads: "Screenshot: filename", where the filename is what
mpv passes to fopen(). It will also show error messages when saving the
screenshot fails.
This means a commands like "seek 13:00 absolute" actually behaves like
"--start=13:00", instead of interpreting the argument as fraction as
with normal float options. This is probably slightly closer to what
you'd expect.
As a consequence, the seek argument's type changes from float to double
internally.
