since there are different views on what ontop is, we make the ontop
window level modifiable. at the moment only support for macOS was added.
the default for macOS was changed from 'system' to 'window' since this
fixes an unwanted behaviour in fullscreen and in general causes less
issues with expected behaviour.
Fixes#2376#3974
To make it easier for the eyes, multi line subtitles should
be left justified (for most languages).
This adds an option to define how subtitles are to be justified
inpendently of how they are aligned.
Also add option to enable --sub-justify to be applied on ASS subtitles.
This was excessively useless, and I want my time back that was needed to
explain users why they don't want to use it.
It captured the byte stream only, and even for types of streams it was
designed for (like transport streams), it was rather questionable.
As part of the removal, un-inline demux_run_on_thread() (which has only
1 call-site now), and sort of reimplement --stream-dump to write the
data directly instead of using the removed capture code.
(--stream-dump is also very useless, and I struggled coming up with an
explanation for it in the manpage.)
vo_opengl used to have it as sub-option, which made it very hard to pass
down option values to backends in a generic way (even if these options
were completely backend-specific). For --opengl-dcomposition we used a
VOFLAG to deal with this. Fortunately, sub-options are gone, and we can
just add it as global option.
Move the option to context_angle.c and add it as global option. I
thought about adding a mechanism to let backends declare options, which
would get magically picked up my m_config instead of having to add them
to the global option list manually (similar to VO vo_driver.options),
but decided against this complexity just for 1 or 2 backends. Likewise,
it could have been added as a single option to avoid the boilerplate of
an option struct, but then again there are probably going to be more
angle suboptions, and it's cleaner.
Since for mpv CLI, the player state is a singleton, full prefetching is
a bit tricky. We do it only on the demuxer layer.
The implementation reuses the old "open thread". This means there is
significant potential for regressions even if the new option is not
used. This is made worse by the fact that I barely tested this code.
The generic mpctx_run_reentrant() wrapper is also removed - this was its
only user, and its remains become part of the new implementation.
Introduce the --opengl-hwdec-interop option, which replaces
--hwdec-preload. The new option allows explicit selection of the interop
backend.
This is relatively complex, and I would have preferred not to add this,
but it's probably useful to debug certain problems. In exchange, the
"new" option documents that pretty much any but the simplest use of it
will not be forward compatible.
Remove ad_spdif from the normal codec list, and select it explicitly.
One goal was to decouple this from the normal codec selection, so
they're less entangled and the decoder selection code can be simplified
in the far future. This means spdif codec selection is now done
explicitly via select_spdif_codec(). We can also remove the weird
requirements on "dts" and "dts-hd" for the --audio-spdif option, and it
can just do the right thing.
Now both video and audio codecs consist of a single codec family each,
vd_lavc and ad_lavc.
this replaces the old fullscreen with the native
macOS fullscreen. additional the
--fs-black-out-screens was removed since the new
API doesn't support it in a way the old one did.
it can possibly be re-added if done manually.
Fixes#2857#3272#1352#2062#3864
Long planned. Leads to some sanity.
There still are some rather gross things. Especially g_groups is ugly,
and a hack that can hopefully be removed. (There is a plan for it, but
whether it's implemented depends on how much energy is left.)
Deactivating this options makes it possible to
circumvent the default OS X behavior of using
points. Windows on HiDPI resolutions won't open
in double the size anymore and videos are display
in their native resolution when windowed.
Fixes#3716
Just that actually changing it at runtime won't do anything.
This deals with a nasty initialization order issue with encoding.
Encoding is initialized after options have initialized, but before
--load-scripts is checked and executed. Encoding initialization accesses
FFmpeg API, thus it has to run after FFmpeg is initialized (which also
implies it's initialized after options/logging init). On the other hand,
it sets the encoding builtin profile, which possibly sets --load-scripts
to "no". That failed at this point because --load-scripts was marked as
fixed.
Just marking it as not fixed gets rid of the headache, even if it's not
perfectly orthodox.
At this point, all other hwaccels provide -copy modes, and vdpau is the
exception with not having one. Although there is vf_vdpaurb, it's less
convenient in certain situations, and exposes some issues with the
filter chain code as well.
- Change connector selection to accept human readable names (such as
eDP-1, HDMI-A-2) rather than arbitrary numbers.
- Change GPU selection to accept GPU number rather than device paths.
- Merge connector and GPU selection into one --drm-connector.
- Add support for --drm-connector=help.
- Add support for --drm-* in EGL backend.
- Refactor KMS; reduce state sharing across drm_common.
Don't require special property code for handling updates, and simply use
the UPDATE_AUDIO flag instead. Also make runtime changes to
--audio-client-name take effect.
Rename the text subtitle options from --sub-text- to --sub-
and --ass- options to --sub-ass-.
The intention is to common sub options to prefixed --sub-
and special ASS option be seen as a special version of sub options.
The OSD options that work like the --sub- options are still named
--osd-.
Man page updated including a short note about renamed --sub-text-*
and --ass-* options to --sub-* and --sub-ass-*.
Move the screensaver enable/disable determination to a central place,
and call it if the stop-screensaver property is changed.
Also, do not stop the screensaver when in idle mode (i.e. no file is
loaded).
Fixes#3615.
I'm not sure if this option affects anything or if it's a placebo,
especially since the VO thread is now registered with MMCSS. Still, I
think --priority=high may have helped back when I used mplayer2 on a
netbook. It's also possible that encoding-mode users would want to set
--priority=idle.
Anyway, it was one of the last M_OPT_FIXED options, so fix that.
The intention of M_OPT_FIXED is to make options not runtime-changeable,
so trying to set them at runtime will always error. This is not wanted
for --profile and --include, for which there is no reason to block them
at runtime.
Fixes#3581.
Seems like this confused users quite often.
Instead of --profile=pseudo-gui, --player-operation-mode=pseudo-gui now
has to be used to invoke pseudo GUI mode. The old way still works, and
still behaves in the old way.
If one of the audio output format options is set, brually reinit the
audio chain.
Since the audio-channels property is still mapped to the deprecated
read-only property, "options/audio-channels" currently has to be used,
e.g. "cycle-values options/audio-channels 2 7.1".
With the merging of options and properties, the mpv_set_option()
function is close to being useless, and mpv_set_property() can be used
for everything instead. There are certain conflicts remaining, which are
explained in depth in the docs. For now, none of this should affect
existing code using the client API.
Make mpv_set_property() redirect to mpv_set_option() before
initialization.
Remove some options marked as M_OPT_FIXED. The "pause" and "speed"
options cannot be written anymore without the playloop being notified by
it, so the M_OPT_FIXED does nothing. For "vo-mmcss-profile", the problem
was lack of synchronization, which has been added. I'm not sure what the
problem was with "frames" - I think it was only marked as M_OPT_FIXED
because changing it during playback will have no effect. Except for
pause/speed, these changes are needed to make them writable as
properties after mpv_initialize().
Also replace all remaining uses of CONF_GLOBAL with M_OPT_FIXED.
Use the new mechanism, instead of wrapped properties. As usual, extend
the update handling to some options that were forgotten/neglected
before. Rename video_reset_aspect() to video_reset_params() to make it
more "general" (and we can amazingly include write access to
video-aspect as well in this).
A recent change merged the window-scaler option and property, but forgot
that the option is float for some reason, while the property uses
double. This led to undefined behavior. Fix it by changing the option
to double too.
Setting the osc or ytdl properties will now load/unload the associated
scripts. (For ytdl this does not mean the currently played URL will be
reloaded.)
Also add a changelog entry for this, which also covers the preceding
work for --terminal.
Remove wrapper properties for OSD and video position updates, use the
new mechanism for them. We can mark the options directly. Update
behavior will work for more options (since I've casually marked more
affected options than the old less direct mechanism covered).
So client API users don't have to care about whether to set this before
or after mpv_initialize().
We still don't enable terminal at any point before mpv_initialize(),
because reasons.
This also subtly changes some behavior how terminal options are applied
while parsing. This essentially reverts the behavior as it was reported
in issue #2588. Originally, I was hoping to get rid of the pre-parse
option pass, but it seems this is absolutely not possible due to the way
config and command line parsing are entangled. Command line options take
priority over configfile options, so they have to be applied later - but
we also want to apply logging and terminal options as specified on the
command-line, but _before_ parsing the config files. It has to be this
way to see config file error messages on the terminal, or to hide them
if --no-terminal is used. libmpv considerations also factor into this.
Extend the flag-based notification mechanism that was used via
M_OPT_TERM. Make the vo_opengl update mechanism use this (which, btw.,
also fixes compilation with OpenGL renderers forcibly disabled).
While this adds a 3rd mechanism and just seems to further the chaos, I'd
rather have a very simple mechanism now, than actually furthering the
mess by mixing old and new update mechanisms. In particular, we'll be
able to remove quite some property implementations, and replace them
with much simpler update handling. The new update mechanism can also
more easily refactored once we have a final mechanism that handles
everything in an uniform way.
--quiet can be always set - the playloop checks it whenever rendering
the status line. Nothing special about it.
The ytdl- options are simply refetched by the Lua script every time a
stream is opened, so it makes sense to be able to change them at runtime
as well.
The VO options don't have a real reason to be marked with it anymore.
Some properties had a different type from their equivalent options (such
as mute, volume, deinterlace, edition). This wasn't really sane, as raw
option values should be always within their bounds. On the other hand,
these properties use a different type to reflect runtime limits (such as
range of available editions), or simply to improve the "UI" (you don't
want to cycle throuhg the completely useless "auto" value when cycling
the "mute" property).
Handle this by making them always return the option type, but also
allowing them to provide a "constricted" type, which is used for UI
purposes. All M_PROPERTY_GET_CONSTRICTED_TYPE changes are related to
this.
One consequence is that you can set the volume property to arbitrary
high values just like with the --volume option, but using the "add"
command it still restricts it to the --volume-max range.
Also deprecate --chapter, as it is grossly incompatible to the chapter
property. We pondered renaming it to --chapters, or introducing a more
powerful --range option, but concluded that --start --end is actually
enough.
These changes appear to take care of the last gross property/option
incompatibilities, although there might still be a few lurking.
Conflicts with the "playlist-pos" property. They're really a bit too
different, and since the --playlist-pos option is relatively new and
obscure, just rename it to get this out of the way.
This meant "cannot be used as per-file option" (wrt. playlist items).
Doesn't make too much sense anymore, especially given how obscure
per-file options are.
This also lets you just do "mpv --hwdec file.mkv", with the minor caveat
that the legacy syntax "--hwdec val" or "-hwdec val" (without "=") does
not work as expected anymore.
Move the embedded string with the builtin profiles to a separate
builtin.conf file. This makes it easier to read and edit, and you can
also check it for errors with --include=etc/builtin.conf. (Normally
errors are hidden intentionally, because there's no way to output error
messages this early, and because some options might not be present on
all platforms or with all configurations.)
The cuvid decoder already knows how to copy back to system memory
if NV12 frames are requested, and this will happen if the decoder
is used without the hwdec.
For convenience, let's add a wrapper hwdec so people don't have
to explicitly pick the cuvid decoder if they want this behaviour.
