OpenSL ES is used on Android. At the moment only stereo output is
supported. Two options are supported: 'frames-per-buffer' and
'sample-rate'. To get better latency the user of libmpv should pass
values obtained from AudioManager.getProperty(PROPERTY_OUTPUT_FRAMES_PER_BUFFER)
and AudioManager.getProperty(PROPERTY_OUTPUT_SAMPLE_RATE).
This uses a different method to piece segments together. The old
approach basically changes to a new file (with a new start offset) any
time a segment ends. This meant waiting for audio/video end on segment
end, and then changing to the new segment all at once. It had a very
weird impact on the playback core, and some things (like truly gapless
segment transitions, or frame backstepping) just didn't work.
The new approach adds the demux_timeline pseudo-demuxer, which presents
an uniform packet stream from the many segments. This is pretty similar
to how ordered chapters are implemented everywhere else. It also reminds
of the FFmpeg concat pseudo-demuxer.
The "pure" version of this approach doesn't work though. Segments can
actually have different codec configurations (different extradata), and
subtitles are most likely broken too. (Subtitles have multiple corner
cases which break the pure stream-concatenation approach completely.)
To counter this, we do two things:
- Reinit the decoder with each segment. We go as far as allowing
concatenating files with completely different codecs for the sake
of EDL (which also uses the timeline infrastructure). A "lighter"
approach would try to make use of decoder mechanism to update e.g.
the extradata, but that seems fragile.
- Clip decoded data to segment boundaries. This is equivalent to
normal playback core mechanisms like hr-seek, but now the playback
core doesn't need to care about these things.
These two mechanisms are equivalent to what happened in the old
implementation, except they don't happen in the playback core anymore.
In other words, the playback core is completely relieved from timeline
implementation details. (Which honestly is exactly what I'm trying to
do here. I don't think ordered chapter behavior deserves improvement,
even if it's bad - but I want to get it out from the playback core.)
There is code duplication between audio and video decoder common code.
This is awful and could be shareable - but this will happen later.
Note that the audio path has some code to clip audio frames for the
purpose of codec preroll/gapless handling, but it's not shared as
sharing it would cause more pain than it would help.
This is required so that the individual surfaces can pass beyond the dxva2
decoder and be passed to the vo.
This also adds additional data to mp_image->planes[0] for IMGFMT_DXVA2, which is
required for maintaining and releasing the surface even if the decoder code is
uninited.
The IDirectXVideoDecoder itself is encapsulated together with its surface pool
and configuration in a dxva2_decoder structure whose creation and destruction is
managed by talloc.
See --lavfi-complex option.
This is still quite rough. There's no support for dynamic configuration
of any kind. There are probably corner cases where playback might freeze
or burn 100% CPU (due to dataflow problems when interaction with
libavfilter).
Future possible plans might include:
- freely switch tracks by providing some sort of default track graph
label
- automatically enabling audio visualization
- automatically mix audio or stack video when multiple tracks are
selected at once (similar to how multiple sub tracks can be selected)
The complex filter support that will be added makes much more complex
use of libavfilter, and I'm not going to bother with adding hacks to
keep libavfilter optional.
Note that hresult_to_str() (coming from wasapi_explain_err()) is mostly
wasapi-specific, but since HRESULT error codes are unique, it can be
extended for any other use.
It existed for XP-compatibility only. There was also a time where
ao_wasapi caused issues, but we're relatively confident that ao_wasapi
works better or at least as good as ao_dsound on Windows Vista and
later.
libwaio was added due to the complete inability to cancel synchronous
I/O cleanly using the public Windows API in Windows XP. Even calling
TerminateThread on the thread performing I/O was a bad solution, because
the TerminateThread function in XP would leak the thread's stack.
In Vista and up, however, this is no longer a problem. CancelIoEx can
cancel synchronous I/O running on other threads, allowing the thread to
exit cleanly, so replace libwaio usage with native Vista API functions.
It should be noted that this change also removes the hack added in
8a27025 for preventing a deadlock that only seemed to happen in Windows
XP. KB2009703 says that Vista and up are not affected by this, due to a
change in the implementation of GetFileType, so the hack should not be
needed anymore.
Now common.c only contains the code for the function loader, while
context.c contains the backend loader/dispatcher.
Not calling it "backend.c", because the central struct is called
MPGLContext.
This is used for dithering, although I'm not aware of anyone who got
higher than 8 bit depth support to work on Linux.
Also put this into egl_helpers.c. Since EGL is pseudo-portable at best I
have no hope that the EGL context creation code in all the backends can
be fully shared. But some self-contained functionality can definitely be
shared.
The previous commit turned sd_lavc_conv from a sd_driver to
free-standing functions. Do the rename to reflect this change
separately to avoid confusing git's content tracking. (Or did
git solve this, making separating renames and content changes
unnecessary?)
The FFmpeg subtitle converter does the same. There used to be some
deficiencies in FFmpeg's code, but it seems at least some of them have
been fixed. There also used to be the timestamp issue (see previous
commit messages), but this doesn't matter anymore. So no reason to
keep this code - get rid of it.
This can be dropped for the same reasons as in the previous commits. It
removes MicroDVD conversion support on Libav, although MicroDVD files
couldn't be read in the first place ever since demux_subreader.c was
removed.
This restored timestamps when demuxing srt subtitles in Libav, which
was important for avoiding slightly overlapping subtitles. Since the
way this works was changed, there is no real reason to maintain proper
timestamps anymore on this level - this can be dropped without issues.
WGL_NV_DX_interop is widely supported by Nvidia and AMD drivers. It
allows a texture to be shared between Direct3D and WGL, so that
rendering can be done with WGL and presentation can be done with
Direct3D. This should allow us to work around some persistent WGL
issues, such as dropped frames with some driver/OS combos, drivers that
buffer frames to increase performance at the cost of latency, and the
inability to disable exclusive fullscreen mode when using WGL to render
to a fullscreen window.
The addition of a DX_interop backend might also enable some cool
Direct3D-specific enhancements in the future, such as using the
GetPresentStatistics API to get accurate frame presentation timestamps.
Note that due to a driver bug, this backend is currently broken on
Intel. It will appear to work as long as the window is not resized too
often, but after a few changes of size it will be unable to share the
newly created renderbuffer with GL. See:
https://software.intel.com/en-us/forums/graphics-driver-bug-reporting/topic/562051
All of these are supported by FFmpeg now. It was disabled by default
too (with FFmpeg).
If compiled against Libav, mpv will lose the ability to read some
subtitle formats (but the most important ones, srt and ass, still should
work).
This is only for specific Hauppage cards. According to the comments in
who is actively using this feature. Get it out of the way.
Anyone who still wants to use this should complain. Keeping this code
would not cause terribly much additional work, and it could be restored
again. (But not if the request comes months later.)
This is a hack, but unfortunately the DwmGetCompositionTimingInfo
heuristic does not work in all cases (with multiple-monitors on Windows
8.1 and even with a single monitor in Windows 10.) See the comment in
mp_w32_is_in_exclusive_mode() for more details.
It should go without saying that if any better method of doing this
reveals itself, this hack should be dropped.
ANGLE is a GLES2 implementation for Windows that uses Direct3D 11 for
rendering, enabling vo_opengl to work on systems with poor OpenGL
drivers and bypassing some of the problems with native GL, such as VSync
in fullscreen mode.
Unfortunately, using GLES2 means that most of vo_opengl's advanced
features will not work, however ANGLE is under rapid development and
GLES3 support is supposed to be coming soon.
This loaded external .ass files via libass. libavformat's .ass reader is
now good enough, so use that instead.
Apparently libavformat still doesn't support fonts embedded into text
.ass files, but support for this has been accidentally broken in mpv for
a while anyway. (And only 1 person complained.)
Notes:
- Unfortunately the only way to talk to EGL from within DRM I could find
involves linking with GBM (generic buffer management for Mesa.)
Because of this, I'm pretty sure it won't work with proprietary NVidia
drivers, but then again, last time I checked NVidia didn't offer
proper screen resolution for VT.
- VT switching doesn't seem to work at all. It's worth mentioning that
using vo_drm before introduction of VT switcher had an anomaly where
user could switch to another VT and input text to it, while video
played on top of that VT. However, that isn't the case with drm_egl:
I can't switch to other VT during playback like this. This makes me
think that it's either a limitation coming from my firmware or from
EGL/KMS itself rather than a bug with my code. Nonetheless, I still
left (untestable) VT switching code in place, in case it's useful to
someone else.
- The mode_id, connector_id and device_path should be configurable for
power users and people who wish to watch videos on nonprimary screen.
Unfortunately I didn't see anything that would allow OpenGL backends
to register their own set of options. At the same time, adding them to
global namespace is pointless.
- A few dozens of lines could be shared with vo_drm (setting up VT
switching, most of code behind page flipping). I don't have any strong
opinion on this.
- Sometimes I get minor visual glitches. I'm not sure if there's a race
condition of some sort, unitialized variable (doubtful), or if it's
buggy driver. (I'm using integrated Intel HD Graphics 4400 with Mesa)
- .config and .control are very minimal.
Signed-off-by: wm4 <wm4@nowhere>
This is based on an older patch by James Ross-Gowan. It was rebased and
cleaned up. Also, the DWM API usage present in the older patch was
removed, because DWM reports nonsense rates at least on Windows 8.1
(they are rounded to integers, just like with the old GDI API - except
the GDI API had a good excuse, as it could report only integers).
Signed-off-by: wm4 <wm4@nowhere>
Implement NNEDI3, a neural network based deinterlacer.
The shader is reimplemented in GLSL and supports both 8x4 and 8x6
sampling window now. This allows the shader to be licensed
under LGPL2.1 so that it can be used in mpv.
The current implementation supports uploading the NN weights (up to
51kb with placebo setting) in two different way, via uniform buffer
object or hard coding into shader source. UBO requires OpenGL 3.1,
which only guarantee 16kb per block. But I find that 64kb seems to be
a default setting for recent card/driver (which nnedi3 is targeting),
so I think we're fine here (with default nnedi3 setting the size of
weights is 9kb). Hard-coding into shader requires OpenGL 3.3, for the
"intBitsToFloat()" built-in function. This is necessary to precisely
represent these weights in GLSL. I tried several human readable
floating point number format (with really high precision as for
single precision float), but for some reason they are not working
nicely, bad pixels (with NaN value) could be produced with some
weights set.
We could also add support to upload these weights with texture, just
for compatibility reason (etc. upscaling a still image with a low end
graphics card). But as I tested, it's rather slow even with 1D
texture (we probably had to use 2D texture due to dimension size
limitation). Since there is always better choice to do NNEDI3
upscaling for still image (vapoursynth plugin), it's not implemented
in this commit. If this turns out to be a popular demand from the
user, it should be easy to add it later.
For those who wants to optimize the performance a bit further, the
bottleneck seems to be:
1. overhead to upload and access these weights, (in particular,
the shader code will be regenerated for each frame, it's on CPU
though).
2. "dot()" performance in the main loop.
3. "exp()" performance in the main loop, there are various fast
implementation with some bit tricks (probably with the help of the
intBitsToFloat function).
The code is tested with nvidia card and driver (355.11), on Linux.
Closes#2230
Add the Super-xBR filter for image doubling, and the prescaling framework
to support it.
The shader code was ported from MPDN extensions project, with
modification to process luma only.
This commit is largely inspired by code from #2266, with
`gl_transform_trans()` authored by @haasn taken directly.
This reverts commit d11184a256.
Unfortunately, there was a lot of unexpected resistance.
Do note that this is still extremely slow, crappy, etc.
Note that vo_x11.c was further edited. Compared to the removed vo_x11.c,
an additional ~200 lines of code was removed in order to simplify it. I
tried to strip it down as much as possible. In particular, support for
odd non-32 bit formats (24, 16, 15, 8 bit) is dropped.
Closes#2300.
It doesn't deal with VDA at all anymore. Rename it to hwdec_osx.c. Not
using hwdec_videotoolbox.c, because that would give it the longest
source path in this project yet. (Also, this code isn't even
VideoToolox-specific, other than the name of the pixel format used.)
VideoToolbox is preferred. Now that FFmpeg released 2.8, there's no
reason to support VDA anymore. In fact, we had a bug that made VDA not
useable with older FFmpeg versions in some newer mpv releases.
VideoToolbox is supported even on slightly older OSX versions, and if
not, you still can run mpv without hw decoding.
There are at least 2 ways of using VAAPI without X11 (Wayland, DRM).
Remove the X11 requirement from the decoder part and the EGL interop.
This will be used by a following commit, which adds Wayland support.
The worst about this is the decoder part, which includes a bad hack for
using the decoder without any VO interop (also known as "vaapi-copy"
mode). Separate the X11 parts so that they're self-contained. For the
EGL interop code we do something similar (it's kept slightly simpler,
because it essentially only has to translate between our silly
MPGetNativeDisplay abstraction and the vaGetDisplay...() call).
Make the GPU memcpy from the dxva2 code generally useful to other parts
of the player.
We need to check at configure time whether SSE intrinsics work at all.
(At least in this form, they won't work on clang, for example. It also
won't work on non-x86.)
Introduce a mp_image_copy_gpu(), and make the dxva2 code use it. Do some
awkward stuff to share the existing code used by mp_image_copy(). I'm
hoping that FFmpeg will sooner or later provide a function like this, so
we can remove most of this again. (There is a patch, bit it's stuck in
limbo since forever.)
All this is used by the following commit.
Should work much better than the old GLX interop code. Requires Mesa 11,
and explicitly selecting the X11 EGL backend with:
--vo=opengl:backend=x11egl
Should it turn out that the new interop works well, we will try to
autodetect EGL by default.
This code still uses some bad assumptions, like expecting surfaces to be
in NV12. (This is probably ok, because virtually all HW will use this
format. But we should at least check this on init or so, instead of
failing to render an image if our assumption doesn't hold up.)
This repo was a lot of help: https://github.com/gbeauchesne/ffvademo
The kodi code was also helpful (the magic FourCC it uses for
EGL_LINUX_DRM_FOURCC_EXT are nowhere documented, and
EGL_IMAGE_INTERNAL_FORMAT_EXT as used in ffvademo does
not actually exist).
(This is the 3rd VAAPI GL interop that was implemented in this player.)
This was in sub/, because the code used to be specific to subtitles. It
was extended to automatically load external audio files too, and moving
the file and renaming it was long overdue.
I see no point in keeping these around. Keeping wrappers for some select
libavfilter filters just because MPlayer had these filters is not a good
reason.
Ultimately, all real filtering work should go to libavfilter, and users
should get used to using vf_lavfi directly. We might even not require
the awful double-nested syntax for using libavfilter one day.
vf_rotate, vf_yadif, vf_stereo3d are kept because mpv uses them
internally. (They all extend the lavfi filters or change their
defaults.) vf_mirror is kept for symmetry with vf_flip. vf_gradfun and
vf_pullup are probably semi-popular, so I'll remove them not yet - only
after some more discussion.
This is mostly to cut down somewhat on the amount of code bloat in
video.c by moving out helper functions (including scaler kernels and
color management routines) to a separate file.
It would certainly be possible to move out more functions (eg. dithering
or CMS code) with some extra effort/refactoring, but this is a start.
Signed-off-by: wm4 <wm4@nowhere>
Some users still use this filter, so the filter was going to be kept.
But I overlooked that libavfilter provides this filter. Remove the
redundant wrapper from mpv. Something like --af=lavfi=bs2b should work
and give exactly the same results.
All of these filters are considered not useful anymore by us. Some have
replacements in libavfilter (useable through af_lavfi).
af_center, af_extrastereo, af_karaoke, af_sinesuppress, af_sub,
af_surround, af_sweep: pretty simple and useless filters which probably
nobody ever wants.
af_ladspa: has a replacement in libavfilter.
af_hrtf: the algorithm doesn't work properly on most sources, and the
implementation was buggy and complicated. (The filter was inherited from
MPlayer; but even in mpv times we had to apply fixes that fixed major
issues with added noise.) There is a ladspa filter if you still want to
use it.
af_export: I'm not even sure what this is supposed to do. Possibly it
was meant for GUIs rendering audio visualizations, but it couldn't
really work well. For example, the size of the audio depended on the
samplerate (fixed number of samples only), and it couldn't retrieve the
complete audio, only fragments. If this is really needed for GUIs, mpv
should add native visualization, or a proper API for it.
Slightly faster than using the dispmanx mess (perhaps to a large amount
due to the rather stupid C-only unoptimized ASS->RGBA blending code).
Do this by reusing vo_opengl's subtitle renderer, and vo_opengl's RPI
backend.
This works similar to the existing .rar support, but uses libarchive.
libarchive supports a number of formats, including zip and (most of)
rar.
Unfortunately, seeking does not work too well. Most libarchive readers
do not support seeking, so it's emulated by skipping data until the
target position. On backwards seek, the file is reopened. This works
fine on a local machine (and if the file is not too large), but will
perform not so well over network connection.
This is disabled by default for now. One reason is that we try
libarchive on every file we open, before trying libavformat, and I'm not
sure if I trust libarchive that much yet. Another reason is that this
breaks multivolume rar support. While libarchive supports seeking in
rar, and (probably) supports multivolume archive, our support of
libarchive (probably) does not. I don't care about multivolume rar, but
vocal users do.
While the "old" libavcodec vdpau API is not deprecated (only the very-
old API is), it's still relatively complicated code that badly
duplicates the much simpler newer vdpau code. It exists only for the
sake of older FFmpeg releases; get rid of it.
VDA is being deprecated in OS X 10.11 so this is needed to keep hwdec working.
The code needs libavcodec support which was added recently (to FFmpeg git,
libav doesn't support it).
Signed-off-by: Stefano Pigozzi <stefano.pigozzi@gmail.com>
Nobody wanted to restore this, so it gets the boot.
If anyone still wants to volunteer to restore menu support, this would
be welcome. (I might even try it myself if I feel masochistic and like
wasting a lot of time for nothing.) But if it does get restored, it
should be done differently. There were many stupid things about how it
was done. For example, it somehow tried to pull mp_nav_events through
all the layers (including needing to "buffer" them in the demuxer),
which was needlessly complicated. It could be done simpler.
This code was already inactive, so this commit actually changes nothing.
Also keep in mind that normal DVD/BD playback still works.
Normally, vdpau decoded frames are passed directly to a suitable
vo (vo_vdpau or vo_opengl) without ever touching system memory. This
is efficient for output purposes, but prevents any of the regular
filters from being used with such frames.
This new filter implements a read-back step to pull the frames back
into system memory where they can be acted on by other filters.
Eventually the frames will be sent to the vo as if they were normal
software-decoded frames.
Note that a vdpau compatible vo must still be used to ensure that
the decoder is properly initialised.
Signed-off-by: wm4 <wm4@nowhere>
This is basically a hack for drivers which prevent the mpv DXVA2 decoder
glue from working if OpenGL is in fullscreen mode.
Since it doesn't add any "hard" new API to the client API, some of the
code would be required for a true zero-copy hw decoding pipeline, and
sine it isn't too much code after all, this is probably acceptable.
They are useless. Not only are they actually rarely in use; but
libavcodec doesn't even output them, as libavcodec has no such sample
formats for decoded audio.
Even if it should happen that we actually still need them (e.g. if doing
direct hardware output), there are better solutions. Swapping the sign
is a fast and lossless operation and can be done inplace, so AO actually
needing it could do this directly.
If you wonder why we keep U8 instead of S8: because libavcodec does it.
Yet another of these dozens of hwaccel changes. This time, libavcodec
provides utility functions, which initialize the vdpau decoder and map
codec profiles. So a lot of work the API user had to do falls away.
This also will give us support for high bit depth profiles, and possibly
HEVC once libavcodec supports it.
Move all of the channel map retrieval/negotiation code to a separate
file. This will (probably) be helpful when extending
ao_coreaudio_exclusive.c.
Nothing else changes, other than some minor cosmetics and renaming,
and changing some details for decoupling it from the ao_coreaudio.c
internals.
And split the Cocoa and Unix cases. Simplify the Cocoa case slightly by
calling mpv_main directly, instead of passing a function pointer. Also
add a comment explaining why Cocoa needs a special case at all.
This unbreaks compiling command line player and libmpv at the same
time. The problem was that doing so silently disabled the OSX
application thing - but the command line player can not use the
vo_opengl Cocoa backend without it.
The OSX application code is basically dead in libmpv, but it's not
that much code anyway.
If you want a mpv binary that does not create an OSX application
singleton (and creates a menu etc.), you must disable cocoa
completely, as cocoa can't be used anyway in this case.
Somewhat less ifdeffery, higher flexibility. Now there are 3 separate
config file resolvers for 3 platforms (unix, win, osx), and they can
still interact with each other somewhat. For example, OSX for now uses
most of Unix, but adds the OSX bundle path.
This can be extended to resolve very specific platform paths, such as
location of the desktop.
Most of the Unix specific code moves to path-unix.c.
The behavior should be the same - if not, it is likely a bug.
It's entirely useless, especially now that vo.c handles screenshots in a
generic way, and requires no special VO support. There are some
potential weird use-cases, but actually I've never seen it being used.
Add a platform-specific entry-point for Windows. This will allow some
platform-specific initialization to be added without the need for ugly
ifdeffery in main.c.
As an immediate advantage, mpv can now use a unicode entry-point and
convert the command line arguments to UTF-8 before passing them to
mpv_main, so osdep_preinit can be simplified a little bit.
This requires FFmpeg git master for accelerated hardware decoding.
Keep in mind that FFmpeg must be compiled with --enable-mmal. Libav
will also work.
Most things work. Screenshots don't work with accelerated/opaque
decoding (except using full window screenshot mode). Subtitles are
very slow - even simple but huge overlays can cause frame drops.
This always uses fullscreen mode. It uses dispmanx and mmal directly,
and there are no window managers or anything on this level.
vo_opengl also kind of works, but is pretty useless and slow. It can't
use opaque hardware decoding (copy back can be used by forcing the
option --vd=lavc:h264_mmal). Keep in mind that the dispmanx backend
is preferred over the X11 ones in case you're trying on X11; but X11
is even more useless on RPI.
This doesn't correctly reject extended h264 profiles and thus doesn't
fallback to software decoding. The hw supports only up to the high
profile, and will e.g. return garbage for Hi10P video.
This sets a precedent of enabling hw decoding by default, but only
if RPI support is compiled (which most hopefully it will be disabled
on desktop Linux platforms). While it's more or less required to use
hw decoding on the weak RPI, it causes more problems than it solves
on real platforms (Linux has the Intel GPU problem, OSX still has
some cases with broken decoding.) So I can live with this compromise
of having different defaults depending on the platform.
Raspberry Pi 2 is required. This wasn't tested on the original RPI,
though at least decoding itself seems to work (but full playback was
not tested).
With a recent cleanup, rar support was stuffed into demux_playlist.c
(because "opening" rar files pretty much just lists archive contents and
adds them to a playlist using a special rar:// protocol, which will
actually access the rar file contents).
Since demux_playlist.c is probed _after_ demux_lavf.c (and should/must
be), libavformat was given the chance to detect DTS streams embedded
within the rar file. This is not really what we want, and a regression
what happened before rar listing was moved to demux_playlist.c.
Fix it by moving the rar listing into its own pseudo-demuxer, and let ir
probe before demux_lavf.c.
(Yes, this feature still has users.)
Why did this exist in the first place? Other than being completely
useless, this even caused some regressions in the past. For example,
there was the case of a laptop exposing its accelerometer as joystick
device, which led to extremely fun things due to the default mappings of
axis movement being mapped to seeking.
I suppose those who really want to use their joystick to control a media
player (???) can configure it as mouse device or so.
We've been prefering the libavcodec mp3 decoder for half a year now.
There is likely no benefit at all for using the libmpg123 one. It's just
a maintenance burden, and tricks users into thinking it's a required
dependency.
The basic idea is to use dynamically generated shaders instead of a
single monolithic file + a ton of ifdefs. Instead of having to setup
every aspect of it separately (like compiling shaders, setting uniforms,
perfoming the actual rendering steps, the GLSL parts), we generate the
GLSL on the fly, and perform the rendering at the same time. The GLSL
is regenerated every frame, but the actual compiled OpenGL-level shaders
are cached, which makes it fast again. Almost all logic can be in a
single place.
The new code is significantly more flexible, which allows us to improve
the code clarity, performance and add more features easily.
This commit is incomplete. It drops almost all previous code, and
readds only the most important things (some of them actually buggy).
The next commit will complete it - it's separate to preserve authorship
information.
Although the libraries we use for resampling (libavresample and
libswresample) do not support changing sampelrate on the fly, this makes
it easier to make sure no audio buffers are implicitly dropped. In fact,
this commit adds additional code to drain the resampler explicitly.
Changing speed twice without feeding audio in-between made it crash
with libavresample inc ertain cases (libswresample is fine). This is
probably a libavresample bug. Hopefully this will be fixed, and also I
attempted to workaround the situation that crashes it. (It seems to
point in direction of random memory corruption, though.)
Move the implementation, of which most was in tl_cue.c, to demux_cue.c.
Currently, this is illogical, because tl_cue.c still accesses MPContext.
This is going to change, and then it will be better if everything is in
demux_cue.c. This is only a separate commit to distinguish code movement
and actual work; the next commit will do the actual work.
Instead of accessing MPContext in player/timeline/*, create a separate
context struct, which the timeline loaders fill out. It turns out that
there's not much in the way too big MPContext that these need to access.
One major PITA is managing (and closing) the set of open demuxers. The
problem is that we need a list of all demuxers to make sure no unneeded
streams are enabled.
This adds a callback to the demuxer_desc struct, with the intention of
leaving to to the demuxer to call the right loader, instead of
explicitly checking the demuxer type and dispatching manually in common
code. I also considered making the timeline part of the demuxer state,
but decided against: it's too much of a mess wrt. memory management and
threading, and also doesn't make it clear who owns the child demuxers.
With the struct timeline decoupled from the demuxer state, it's at least
somewhat clear that the child demuxers are independent from the "main"
demuxer.
The actual changes to player/timeline/* are separated in the following
commits, because they're quite verbose. Some artifacts will be removed
later as soon as there's only 1 timeline loading mechanism.
Remove the confusing crap that allowed a filter using the libavfilter
bridge to be compiled without libavfilter. Instead, compile the wrappers
only if libavfilter is enabled at compile time.
The only filter which still requires it is vf_stereo3d (unfortunately).
Special-case this one. (The whole filter and how it interacts with lavfi
is pure braindeath anyway.)
If "--af=rubberband" is used, librubberband will be used to speed up or
slow down audio with pitch correction.
This still has some problems: the audio delay is not calculated
correctly, so the audio position jitters around by a few milliseconds.
This will probably ruin video timing.
gl_common.c contained the function loader (which is big) and additional
utility functions (not so big, but will grow when moving more out of
gl_video.c). Just split them. There are no changes other than some
modifications to comments.
This was apparently useful for correct interlaced scaling (although I
don't know anyone who used this). It was rarely used (if at all), had an
inconvenient output format (packed YUV), and now has a better solution
in libavfilter (using the libavfilter "scale" filter via vf_lavfi).
There is no reason to keep this filter any longer.
It's entirely useless. I left it in for a while, because the analog TV
code had a transitional bug that could switch chroma planes, but it was
fixed long ago. It's also available in libavfilter.
Apparently it was completely broken and essentially did nothing. This
was broken sometime in early mpv or mplayer2 times.
Get rid of it. If you _really_ need it, wait until FFmpeg ports it from
MPlayer, which will happen very soon.
The symlink trick made waf go crazy (deleting source files, getting
tangled up in infinite recursion... I wish I was joking). This means we
still can't build the client API examples in a reasonable way using the
include files of the local repository (instead of globally installed
headers). Not building them at all is better than deleting source files.
Instead, provide some manual instructions how to build each example
(except for the Qt examples, which provide qmake project files).
Our own code was introduced when FFmpeg didn't provide this API (or
maybe didn't even have a way to determine the CPU count). But now,
av_cpu_count() is available for all FFmpeg/Libav versions we support,
and there's no reason to have our own code.
libavutil's code seems to be slightly more sophisticated than our's, and
it's possible that the detected CPU count is different on some platforms
after this change.
The examples simple.c and cocoabasic.m can be compiled without
installing libmpv. But also, they didn't use the correct include path
libmpv programs normally use, so they couldn't be built with a properly
installed system-libmpv. That's pretty bad for examples, which are
supposed to show how to use libmpv correctly.
So do some bullshit that symlinks libmpv to a "mpv" include directory
under the build directory. This name-mismatch is a direct consequence of
the bullshit done in 499a6758 (requested in #539 for dumb reasons). (We
don't want to name the client API headers directory "mpv", because that
would be too unspecific, and clashes with having the mpv binary in the
same directory.)
If you have spaces or other "unusual" characters in your paths, the
build will break, because I couldn't find out where waf hides its
function to escape shell parameters (or a way to invoke programs
without involving the shell). Neither does such a thing to be
documented, nor do they seem to have a clear way to do this in
their code.
This also doesn't compile the Qt examples, because everything becomes
even more terrible from there on.
There's no reason why parts of this demuxer would be in a separate
source file. The existence of this code is already somewhat questionable
anyway, so it may as well be dumped into a single file.
Even stranger that demux.c included mf.h for no reason (it was an
artifact from 2002 when the architecture was uncleaner).
Instead of just failing during channel map selection, try to select a close
layout that makes most sense and upmix/downmix to that instead of failing AO
initialization. The heuristic is rather simple, and uses the following steps:
1) If mono is required always prefer stereo to a multichannel upmix.
2) Search for an upmix that is an exact superset of the required channel map.
3) Search for a downmix that is the exact subset of the required channel map.
4) Search for either an upmix or downmix that is the closest (minimum difference
of channels) to the required channel map.
Makes all of overlay_add work on windows/mingw.
Since we now don't explicitly check for mmap() anymore (it's always
present), this also requires us to make af_export.c compile, but I
haven't tested it.
This adds API to libmpv that lets host applications use the mpv opengl
renderer. This is a more flexible (and possibly more portable) option to
foreign window embedding (via --wid).
This assumes that methods like context sharing and multithreaded OpenGL
rendering are infeasible, and that a way is needed to integrate it with
an application that uses a single thread to render everything.
Add an example that does this with QtQuick/qml. The example is
relatively lazy, but still shows how relatively simple the integration
is. The FBO indirection could probably be avoided, but would require
more work (and would probably lead to worse QtQuick integration, because
it would have to ignore transformations like rotation).
Because this makes mpv directly use the host application's OpenGL
context, there is no platform specific code involved in mpv, except
for hw decoding interop.
main.qml is derived from some Qt example.
The following things are still missing:
- a way to do better video timing
- expose GL renderer options, allow changing them at runtime
- support for color equalizer controls
- support for screenshots
This is an ancient filter, and we assume it's not useful anymore.
If you really want this, it's still available in libavfilter (e.g. via
--vf=lavfi=[pp...]). The disadvantage is that mpv doesn't pass through
QP information to libavfilter. (This was probably the reason vf_pp still
was part of mpv - it was slightly easier to pass QP internally.)
This wasn't done before because there was no advantage in "abstracting"
it. This changed, and putting this into its own files is better than
messing it into gl_common.c/h.
The subprocess code was already split into fairly general functions,
separate from the Lua code. It's getting pretty big though, especially
the Windows-specific parts, so move it into its own files.
Implement skeleton IMMNotificationClient to watch for changes in the
sound device. This will make recovery possible from changes shared
mode sample rate, bit depth, "enhancements"/effects and even graceful
device removal.
http://msdn.microsoft.com/en-us/library/windows/desktop/dd371417%28v=vs.85%29.aspx
Signed-off-by: Kevin Mitchell <kevmitch@gmail.com>
Use a pseudo-filter when changing speed with resampling, instead of
somehow changing a samplerate somewhere. This uses the same underlying
mechanism, but is a bit more structured and cleaner. It also makes some
of the following changes easier.
Since we now always use filters to change audio speed, move most of the
work set_playback_speed() does to recreate_audio_filters().
No development activity (or even any sign of life) for almost a year.
A replacement based on youtube-dl will probably be provided before the
next mpv release. Ask on the IRC channel if you want to test.
Simplify the Lua check too: libquvi linking against a different Lua
version than mpv was a frequent issue, but with libquvi gone, no
direct dependency uses Lua, and such a clash is rather unlikely.
This provides some helper functions and classes for C++/Qt. As the top
of qthelper.hpp says, this is built on top of the client API, and is a
mere helper provided for convenience.
Maybe this should be a separate library, but on the other hand I don't
see much of a point in that. It's also header-only, but C++ people like
such things. This makes it easier for us, because we don't need to care
about ABI compatibility.
The client API doesn't change, but bump it so that those who are using
this header can declare a proper dependency.
Objective-C categories need special linker flags from the user when statically
linking (-ObjC LDFLAG), so make everyone's life simpler and remove them.
Use libwaio to read from pipes (stdin or named pipes) on Windows. This
liberates us from nasty issues, such as pipes (as created by most
programs) not being possible to read in a non-blocking or event-driven
way. Although it would be possible to do that in a somewhat sane way
on Vista+, it's still not easy, and on XP it's especially hard. libwaio
handles these things for us.
Move pipe.c to pipe-unix.c, and remove Windows specific things. Also
adjust the input.c code to make this work cleanly.
1. Separate buffer and temporary file handling from the vo to make maintenance
and reading code easier
2. Skip resizing as much as possible if back buffer is still busy.
3. Detach and mark osd buffers for deletion if we want to redraw them and they
are still busy. This could be a possible case for the video buffers as
well. Maybe better than double buffering.
All the above steps made it possible to have resizing without any artifacts
even for subtitles. Also fixes dozen of bugs only I knew, like broken subtitles
for rgb565 buffers. I can now sleep at night again.
OSX is POSIX conformant, but it's a sad joke: it provides the
<semaphore.h> prototype as the standard demands, but they're empty
wrappers, and all functions just return ENOSYS.
Emulate them similar to how osdep/io.h emulate filesystem functions on
Windows. By including the header, working sem_* functions become
available.
To make it async-signal safe, use a pipe for wakeup (write() is AS-safe,
but mutexes can't be). Actually I'm not sure anymore if we really need
AS-safety, but for now the emulation can do it.
On Linux, the system provides a far more efficient and robust
implementation. We definitely want to avoid using the emulation if
possible, so this code is active on OSX only. For convenience we always
build the source file though, even if the implementation is disabled and
no actual code is generated.
(Linux provides working semaphores, but is formally not POSIX
conformant. On OSX it's the opposite. Is POSIX a complete joke?)
This was kept in the codebase because it is slightly faster than --vo=opengl
on really old Intel cards (from the GMA era). Time to kill it, and let it rest.
Fixes#1061
bstr.c doesn't really deserve its own directory, and compat had just
a few files, most of which may as well be in osdep. There isn't really
any justification for these extra directories, so get rid of them.
The compat/libav.h was empty - just delete it. We changed our approach
to API compatibility, and will likely not need it anymore.
Abandon the "old" infrastructure for --input-file (mp_input_add_fd(),
select() loop, non-blocking reads). Replace it with something that
starts a reader thread, using blocking input.
This is for the sake of Windows. Windows is a truly insane operating
system, and there's not even a way to read a pipe in a non-blocking
way, or to wait for new input in an interruptible way (like with
poll()). And unfortunately, some want to use pipe to send input to
mpv. There are probably (slightly) better IPC mechanisms available
on Windows, but for the sake of platform uniformity, make this work
again for now.
On Vista+, CancelIoEx() could probably be used. But there's no way on
XP. Also, that function doesn't work on wine, making development
harder. We could forcibly terminate the thread, which might work, but
is unsafe. So what we do is starting a thread, and if we don't want
the pipe input anymore, we just abandon the thread. The thread might
remain blocked forever, but if we exit the process, the kernel will
forcibly kill it. On Unix, just use poll() to handle this.
Unfortunately the code is pretty crappy, but it's ok, because it's late
and I wanted to stop working on this an hour ago.
Tested on wine; might not work on a real Windows.
Since the 'syms' tool is shipped in waf's extras, when using system waf the
default tool overrides our own. Force our syms tool by providing the tooldir.
Fixes#1006
This is probably nicer. The actual version number doesn't change (other
than the minor being incremented).
The "| 0UL" is to make the type unsigned long int, like it was before.
Instead of using a regex to match names to be exported from the libmpv
dynamic shared library, use a libmpv.def file, which lists all exported
functions explicitly.
This reduces the platform specifics in syms.py. I'm not sure if the
separate compile_sym task is still needed (it could probably be
collapsed, which would concentrate the platform specifics into one
place).
Use OPT_KEYVALUELIST() for all places where AVOptions are directly set
from mpv command line options. This allows escaping values, better
diagnostics (also no more "pal"), and somehow reduces code size.
Remove the old crappy option parser (av_opts.c).
Plan 9 has a very interesting synchronization mechanism, the
rendezvous() call. A good property of this is that you don't need to
explicitly initialize and destroy a barrier object, unlike as with e.g.
POSIX barriers (which are mandatory to begin with). Upon "meeting", they
can exchange a value.
This mechanism will be nice to synchronize certain stages of
initialization between threads in the following commit.
Unlike Plan 9 rendezvous(), this is not implemented with a hashtable,
because that would require additional effort (especially if you want to
make it actually scele). Unlike the Plan 9 variant, we use intptr_t
instead of void* as type for the value, because I expect that we will be
mostly passing a status code as value and not a pointer. Converting an
integer to void* requires two cast (because the integer needs to be
intptr_t), the other way around it's only one cast.
We don't particularly care about performance in this case either. It's
simply not important for our use-case. So a simple linked list is used
for waiters, and on wakeup, all waiters are temporarily woken up.
DVD and Bluray (and to some extent cdda) require awful hacks all over
the codebase to make them work. The main reason is that they act like
container, but are entirely implemented on the stream layer. The raw
mpeg data resulting from these streams must be "extended" with the
container-like metadata transported via STREAM_CTRLs. The result were
hacks all over demux.c and some higher-level parts.
Add a "disc" pseudo-demuxer, and move all these hacks and special-cases
to it.
The mplayer1/2/mpv CoreAudio audio output historically contained both usage
of AUHAL APIs (these go through the CoreAudio audio server) and the Device
based APIs (used only for output of compressed formats in exclusive mode).
The latter is a very unwieldy and low level API and pretty much forces us to
write a lot of code for little workr. Also with the widespread of HDMI, the
actual need for outputting compressed audio directly to the device is getting
lower (it was very useful with S/PDIF for bandwidth constraints not allowing
a number if channels transmitted in LPCM).
Considering how invasive it is (uses hog/exclusive mode), the new AO
(`ao_coreaudio_device`) is not going to be autoprobed but the user will have
to select it.
For remarks, pretty much see the manpage additions. Could help with
network streams that require too much seeking (maybe), or might be
extended to help with the use case of watching and downloading a file
at the same time.
In general, it might be a useless feature and could be removed again.
It is reasonably stable, so all further changes will be versioned.
Also change how the libmpv version number is generated. Fix the patch
version number to 0; I don't think we have a use for this. In
particular, the version doesn't version mpv, just the client API.
Does anyone actually use this?
For now, update it, because it's the only case left where an option
points to a global variable (and not a struct offset).
This was never intended to be installed; waf just picked it up
automagically. There's also a closed ticket on github where someone
complains that the program "simple" is installed, and I didn't realize
at this point that it was actually installed by default when enabling
the client API.
If a single person complains, I will readd it. But I don't expect that
this will happen.
The main reason for removing this is that it's some of the most unclean
code remaining, it's unmaintained, and I've never ever heard of someone
using it.
Currently, vo_reconfig() calculates the requested window size and sets
the vo->dwidth/dheight fields _if_ VOCTRL_UPDATE_SCREENINFO is
implemented by the VO or the windowing backend. The window size can be
different from the display size if e.g. the --geometry option is used.
It will also set the vo->dx/dy fields and read vo->xinerama_x/y.
It turned out that this is very backwards and actually requires the
windowing backends to workaround these things. There's also
MPOpts.screenwidth/screenheight, which used to map to actual options,
but is now used only to communicate the screen size to the vo.c code
calculating the window size and position.
Change this by making the window geometry calculations available as
separate functions. This commit doesn't change any VO code yet, and just
emulates the old way using the new functions. VO code will remove its
usage of VOCTRL_UPDATE_SCREENINFO and use the new functions directly.
This factors out some code from vo_vdpau.c, especially deinterlacing
handling. The intention is to use this for vo_vdpau.c to make the logic
significantly easier, and to use it for vo_opengl (gl_hwdec_vdpau.c) to
allow selecting deinterlace and postprocessing modes.
As of this commit, the filter actually does nothing, since both vo_vdpau
and vo_opengl treat the generated images as normal vdpau images. This
will change in the following commits.
This was part of osdep/threads.c out of laziness. But it doesn't contain
anything OS dependent. Note that the rest of threads.c actually isn't
all that OS dependent either (just some minor ifdeffery to work around
the lack of clock_gettime() on OSX).
Not needed anymore. I'm not opposed to having asm, but inline asm is too
much of a pain, and it was planned long ago to eventually get rid fo all
inline asm uses.
For the note, the inline asm use that was removed with the previous
commits was almost worthless. It was confined to video filters, and most
video filtering is now done with libavfilter. Some mpv filters (like
vf_pullup) actually redirect to libavfilter if possible.
If asm is added in the future, it should happen in the form of external
files.
These playlist parsers are all what's left from the old mplayer playlist
parsing code. All of it is old code that does little error checking; the
type of C string parsing code that gives you nightmare.
Some playlist parsers have been rewritten and are located in
demux_playlist.c. The removed formats were not reimplemented. ASX and
SMIL use XML, and since we don't want to depend on a full blown XML
parser, this is not so easy. Possibly these formats could be supported
by writing a very primitive XML-like lexer, which would lead to success
with most real world files, but I haven't attempted that. As for NSC, I
couldn't find any URL that worked with MPlayer, and in general this
formats seems to be more than dead.
Move playlist_parse_file() to playlist.c. It's pretty small now, and
basically just opens a stream and a demuxer. No use keeping
playlist_parser.c just for this.
Mainly meant to apply simple VapourSynth filters to video at runtime.
This has various restrictions, which are listed in the manpage.
Additionally, this actually copies video frames when converting frame
references from mpv to VapourSynth, and a second time when going from
VapourSynth to mpv. This is inefficient and could probably be easily
improved. But for now, this is simpler, and in fact I'm not sure if
we even can references VapourSynth frames after the core has been
destroyed.
This cd_info_t struct was practically unused. The only thing it did was
storing the track name of the form "Track %d" in a very roundabout way.
Remove it. (It made more sense when there was still CDDB support.)
This reads MPV_CLIENT_API_VERSION from the source header, and turns it
into a 3 part version number.
E.g. if MPV_CLIENT_API_VERSION were 0x12abcdef, this would result in
"18.171.773615" (8 bits, 8 bits, 16 bits).
We'll see if this is actually useful, or if it's too clever.
Rename it to --enable-libmpv-shared. The option name didn't really
tell much. When we add the possibility to create a static library,
it would also be bad if that were named --enable-static (because it
would sound like it does what --static-build does).
ao_wasapi.c was almost entirely init code mixed with option code and
occasionally actual audio handling code. Split most things to
ao_wasapi_utils.c and keep the audio handling code in ao_wasapi.c.
This has 2 goals:
- Ensure that AOs have always enough data, even if the device buffers
are very small.
- Reduce complexity in some AOs, which do their own buffering.
One disadvantage is that performance is slightly reduced due to more
copying.
Implementation-wise, we don't change ao.c much, and instead "redirect"
the driver's callback to an API wrapper in push.c.
Additionally, we add code for dealing with AOs that have a pull API.
These AOs usually do their own buffering (jack, coreaudio, portaudio),
and adding a thread is basically a waste. The code in pull.c manages
a ringbuffer, and allows callback-based AOs to read data directly.
This library will export the client API functions.
Note that this doesn't allow compiling the command line player to link
against this library yet. The reason is that there's lots of weird stuff
required to setup the execution environment (mostly Windows and OSX
specifics), as well as things which are out of scope of the client API
and every application has to do on its own. However, since the mpv
command line player basically reuses functions from the mpv core to
implement these things, it's not very easy to separate the command
line player form the mpv core.
Add a client API, which is intended to be a stable API to get some rough
control over the player. Basically, it reflects what can be done with
input.conf commands or the old slavemode. It will replace the old
slavemode (and enable the implementation of a new slave protocol).
Application icon was added to the Dock only when run inside of a bundle. That
was handled automatically by OS X using the Info.plist definition.
To add the Application icon when run as a CLI program, I used the samme
approach in the X11 code and loaded the icon as a static binary blob inside
of mpv's binary. This is the simplest approach as it avoid headackes when
relocating the binary and such.
This finally gets rid of the LaTeX dependency.
We should actually be using docultils directly here, but I didn't
do this because of all the potential Python 2/3 breakage.
This is probably useful.
Note that this includes a small, stupid hack to prevent loading of the
config file if vf_lavfi is not available. The profile by default uses
vf_lavfi, and the config parser will output errors if vf_lavfi is not
available.
As another caveat, we install the example profile even if encoding is
disabled (though we don't load it, since this would print errors).
