2022-03-16 23:11:06 +01:00
|
|
|
# .rst: FindPipeWire
|
linux-capture: Add PipeWire-based capture
Add a new Linux capture based on PipeWire [1] and the Desktop portal [2].
This new capture starts by asking the Desktop portal for a screencapture session.
There are quite a few D-Bus calls involved in this, but the key points are:
1. A connection to org.freedesktop.portal.ScreenCast is estabilished, and the
available cursor modes are updated.
2. CreateSession() is called. This is the first step of the negotiation.
3. SelectSources() is called. This is when a system dialog pops up asking the
user to either select a monitor (desktop capture) or a window (window capture).
4. Start() is called. This signals the compositor that it can setup a PipeWire
stream, and start sending buffers.
The reply to this fourth call gives OBS Studio the PipeWire fd, and the id of the
PipeWire node where the buffers are being sent to. This allows creating a consumer
PipeWire stream, and receive the buffers.
Metadata cursor is always preferred, but on the lack of it, we ask the stream for
an embedded cursor (i.e. the cursor is drawn at the buffer, and OBS Studio has no
control over it.)
Window capturing is implemented as a crop operation on the buffer. Compositors
can send big buffers, and a crop rectangle, and this is used to paint a subregion
of the buffer in the scene.
The new capture is only loaded when running on EGL, since it depends on EGL to
call gs_texture_create_from_dmabuf().
[1] https://pipewire.org/
[2] https://github.com/flatpak/xdg-desktop-portal/
2021-02-25 20:57:33 +01:00
|
|
|
# -------
|
|
|
|
|
#
|
|
|
|
|
# Try to find PipeWire on a Unix system.
|
|
|
|
|
#
|
|
|
|
|
# This will define the following variables:
|
|
|
|
|
#
|
2022-03-16 23:11:06 +01:00
|
|
|
# ``PIPEWIRE_FOUND`` True if (the requested version of) PipeWire is available
|
|
|
|
|
# ``PIPEWIRE_VERSION`` The version of PipeWire ``PIPEWIRE_LIBRARIES`` This can
|
|
|
|
|
# be passed to target_link_libraries() instead of the ``PipeWire::PipeWire``
|
|
|
|
|
# target ``PIPEWIRE_INCLUDE_DIRS`` This should be passed to
|
|
|
|
|
# target_include_directories() if the target is not used for linking
|
|
|
|
|
# ``PIPEWIRE_DEFINITIONS`` This should be passed to target_compile_options() if
|
|
|
|
|
# the target is not used for linking
|
linux-capture: Add PipeWire-based capture
Add a new Linux capture based on PipeWire [1] and the Desktop portal [2].
This new capture starts by asking the Desktop portal for a screencapture session.
There are quite a few D-Bus calls involved in this, but the key points are:
1. A connection to org.freedesktop.portal.ScreenCast is estabilished, and the
available cursor modes are updated.
2. CreateSession() is called. This is the first step of the negotiation.
3. SelectSources() is called. This is when a system dialog pops up asking the
user to either select a monitor (desktop capture) or a window (window capture).
4. Start() is called. This signals the compositor that it can setup a PipeWire
stream, and start sending buffers.
The reply to this fourth call gives OBS Studio the PipeWire fd, and the id of the
PipeWire node where the buffers are being sent to. This allows creating a consumer
PipeWire stream, and receive the buffers.
Metadata cursor is always preferred, but on the lack of it, we ask the stream for
an embedded cursor (i.e. the cursor is drawn at the buffer, and OBS Studio has no
control over it.)
Window capturing is implemented as a crop operation on the buffer. Compositors
can send big buffers, and a crop rectangle, and this is used to paint a subregion
of the buffer in the scene.
The new capture is only loaded when running on EGL, since it depends on EGL to
call gs_texture_create_from_dmabuf().
[1] https://pipewire.org/
[2] https://github.com/flatpak/xdg-desktop-portal/
2021-02-25 20:57:33 +01:00
|
|
|
#
|
2022-03-16 23:11:06 +01:00
|
|
|
# If ``PIPEWIRE_FOUND`` is TRUE, it will also define the following imported
|
|
|
|
|
# target:
|
linux-capture: Add PipeWire-based capture
Add a new Linux capture based on PipeWire [1] and the Desktop portal [2].
This new capture starts by asking the Desktop portal for a screencapture session.
There are quite a few D-Bus calls involved in this, but the key points are:
1. A connection to org.freedesktop.portal.ScreenCast is estabilished, and the
available cursor modes are updated.
2. CreateSession() is called. This is the first step of the negotiation.
3. SelectSources() is called. This is when a system dialog pops up asking the
user to either select a monitor (desktop capture) or a window (window capture).
4. Start() is called. This signals the compositor that it can setup a PipeWire
stream, and start sending buffers.
The reply to this fourth call gives OBS Studio the PipeWire fd, and the id of the
PipeWire node where the buffers are being sent to. This allows creating a consumer
PipeWire stream, and receive the buffers.
Metadata cursor is always preferred, but on the lack of it, we ask the stream for
an embedded cursor (i.e. the cursor is drawn at the buffer, and OBS Studio has no
control over it.)
Window capturing is implemented as a crop operation on the buffer. Compositors
can send big buffers, and a crop rectangle, and this is used to paint a subregion
of the buffer in the scene.
The new capture is only loaded when running on EGL, since it depends on EGL to
call gs_texture_create_from_dmabuf().
[1] https://pipewire.org/
[2] https://github.com/flatpak/xdg-desktop-portal/
2021-02-25 20:57:33 +01:00
|
|
|
#
|
2022-03-16 23:11:06 +01:00
|
|
|
# ``PipeWire::PipeWire`` The PipeWire library
|
linux-capture: Add PipeWire-based capture
Add a new Linux capture based on PipeWire [1] and the Desktop portal [2].
This new capture starts by asking the Desktop portal for a screencapture session.
There are quite a few D-Bus calls involved in this, but the key points are:
1. A connection to org.freedesktop.portal.ScreenCast is estabilished, and the
available cursor modes are updated.
2. CreateSession() is called. This is the first step of the negotiation.
3. SelectSources() is called. This is when a system dialog pops up asking the
user to either select a monitor (desktop capture) or a window (window capture).
4. Start() is called. This signals the compositor that it can setup a PipeWire
stream, and start sending buffers.
The reply to this fourth call gives OBS Studio the PipeWire fd, and the id of the
PipeWire node where the buffers are being sent to. This allows creating a consumer
PipeWire stream, and receive the buffers.
Metadata cursor is always preferred, but on the lack of it, we ask the stream for
an embedded cursor (i.e. the cursor is drawn at the buffer, and OBS Studio has no
control over it.)
Window capturing is implemented as a crop operation on the buffer. Compositors
can send big buffers, and a crop rectangle, and this is used to paint a subregion
of the buffer in the scene.
The new capture is only loaded when running on EGL, since it depends on EGL to
call gs_texture_create_from_dmabuf().
[1] https://pipewire.org/
[2] https://github.com/flatpak/xdg-desktop-portal/
2021-02-25 20:57:33 +01:00
|
|
|
#
|
|
|
|
|
# In general we recommend using the imported target, as it is easier to use.
|
|
|
|
|
# Bear in mind, however, that if the target is in the link interface of an
|
|
|
|
|
# exported library, it must be made available by the package config file.
|
|
|
|
|
|
2022-03-16 23:11:06 +01:00
|
|
|
# =============================================================================
|
|
|
|
|
# Copyright 2014 Alex Merry <alex.merry@kde.org> Copyright 2014 Martin Gräßlin
|
|
|
|
|
# <mgraesslin@kde.org> Copyright 2018-2020 Jan Grulich <jgrulich@redhat.com>
|
linux-capture: Add PipeWire-based capture
Add a new Linux capture based on PipeWire [1] and the Desktop portal [2].
This new capture starts by asking the Desktop portal for a screencapture session.
There are quite a few D-Bus calls involved in this, but the key points are:
1. A connection to org.freedesktop.portal.ScreenCast is estabilished, and the
available cursor modes are updated.
2. CreateSession() is called. This is the first step of the negotiation.
3. SelectSources() is called. This is when a system dialog pops up asking the
user to either select a monitor (desktop capture) or a window (window capture).
4. Start() is called. This signals the compositor that it can setup a PipeWire
stream, and start sending buffers.
The reply to this fourth call gives OBS Studio the PipeWire fd, and the id of the
PipeWire node where the buffers are being sent to. This allows creating a consumer
PipeWire stream, and receive the buffers.
Metadata cursor is always preferred, but on the lack of it, we ask the stream for
an embedded cursor (i.e. the cursor is drawn at the buffer, and OBS Studio has no
control over it.)
Window capturing is implemented as a crop operation on the buffer. Compositors
can send big buffers, and a crop rectangle, and this is used to paint a subregion
of the buffer in the scene.
The new capture is only loaded when running on EGL, since it depends on EGL to
call gs_texture_create_from_dmabuf().
[1] https://pipewire.org/
[2] https://github.com/flatpak/xdg-desktop-portal/
2021-02-25 20:57:33 +01:00
|
|
|
#
|
|
|
|
|
# Redistribution and use in source and binary forms, with or without
|
2022-03-16 23:11:06 +01:00
|
|
|
# modification, are permitted provided that the following conditions are met:
|
linux-capture: Add PipeWire-based capture
Add a new Linux capture based on PipeWire [1] and the Desktop portal [2].
This new capture starts by asking the Desktop portal for a screencapture session.
There are quite a few D-Bus calls involved in this, but the key points are:
1. A connection to org.freedesktop.portal.ScreenCast is estabilished, and the
available cursor modes are updated.
2. CreateSession() is called. This is the first step of the negotiation.
3. SelectSources() is called. This is when a system dialog pops up asking the
user to either select a monitor (desktop capture) or a window (window capture).
4. Start() is called. This signals the compositor that it can setup a PipeWire
stream, and start sending buffers.
The reply to this fourth call gives OBS Studio the PipeWire fd, and the id of the
PipeWire node where the buffers are being sent to. This allows creating a consumer
PipeWire stream, and receive the buffers.
Metadata cursor is always preferred, but on the lack of it, we ask the stream for
an embedded cursor (i.e. the cursor is drawn at the buffer, and OBS Studio has no
control over it.)
Window capturing is implemented as a crop operation on the buffer. Compositors
can send big buffers, and a crop rectangle, and this is used to paint a subregion
of the buffer in the scene.
The new capture is only loaded when running on EGL, since it depends on EGL to
call gs_texture_create_from_dmabuf().
[1] https://pipewire.org/
[2] https://github.com/flatpak/xdg-desktop-portal/
2021-02-25 20:57:33 +01:00
|
|
|
#
|
2022-03-16 23:11:06 +01:00
|
|
|
# 1. Redistributions of source code must retain the copyright notice, this list
|
|
|
|
|
# of conditions and the following disclaimer.
|
|
|
|
|
# 2. Redistributions in binary form must reproduce the copyright notice, this
|
|
|
|
|
# list of conditions and the following disclaimer in the documentation and/or
|
|
|
|
|
# other materials provided with the distribution.
|
linux-capture: Add PipeWire-based capture
Add a new Linux capture based on PipeWire [1] and the Desktop portal [2].
This new capture starts by asking the Desktop portal for a screencapture session.
There are quite a few D-Bus calls involved in this, but the key points are:
1. A connection to org.freedesktop.portal.ScreenCast is estabilished, and the
available cursor modes are updated.
2. CreateSession() is called. This is the first step of the negotiation.
3. SelectSources() is called. This is when a system dialog pops up asking the
user to either select a monitor (desktop capture) or a window (window capture).
4. Start() is called. This signals the compositor that it can setup a PipeWire
stream, and start sending buffers.
The reply to this fourth call gives OBS Studio the PipeWire fd, and the id of the
PipeWire node where the buffers are being sent to. This allows creating a consumer
PipeWire stream, and receive the buffers.
Metadata cursor is always preferred, but on the lack of it, we ask the stream for
an embedded cursor (i.e. the cursor is drawn at the buffer, and OBS Studio has no
control over it.)
Window capturing is implemented as a crop operation on the buffer. Compositors
can send big buffers, and a crop rectangle, and this is used to paint a subregion
of the buffer in the scene.
The new capture is only loaded when running on EGL, since it depends on EGL to
call gs_texture_create_from_dmabuf().
[1] https://pipewire.org/
[2] https://github.com/flatpak/xdg-desktop-portal/
2021-02-25 20:57:33 +01:00
|
|
|
# 3. The name of the author may not be used to endorse or promote products
|
|
|
|
|
# derived from this software without specific prior written permission.
|
|
|
|
|
#
|
2022-03-16 23:11:06 +01:00
|
|
|
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
|
|
|
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
|
|
|
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
|
|
|
|
|
# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
|
|
|
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
|
|
|
# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
|
|
|
|
# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
|
|
|
|
|
# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
|
|
|
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
|
|
|
# POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
# =============================================================================
|
linux-capture: Add PipeWire-based capture
Add a new Linux capture based on PipeWire [1] and the Desktop portal [2].
This new capture starts by asking the Desktop portal for a screencapture session.
There are quite a few D-Bus calls involved in this, but the key points are:
1. A connection to org.freedesktop.portal.ScreenCast is estabilished, and the
available cursor modes are updated.
2. CreateSession() is called. This is the first step of the negotiation.
3. SelectSources() is called. This is when a system dialog pops up asking the
user to either select a monitor (desktop capture) or a window (window capture).
4. Start() is called. This signals the compositor that it can setup a PipeWire
stream, and start sending buffers.
The reply to this fourth call gives OBS Studio the PipeWire fd, and the id of the
PipeWire node where the buffers are being sent to. This allows creating a consumer
PipeWire stream, and receive the buffers.
Metadata cursor is always preferred, but on the lack of it, we ask the stream for
an embedded cursor (i.e. the cursor is drawn at the buffer, and OBS Studio has no
control over it.)
Window capturing is implemented as a crop operation on the buffer. Compositors
can send big buffers, and a crop rectangle, and this is used to paint a subregion
of the buffer in the scene.
The new capture is only loaded when running on EGL, since it depends on EGL to
call gs_texture_create_from_dmabuf().
[1] https://pipewire.org/
[2] https://github.com/flatpak/xdg-desktop-portal/
2021-02-25 20:57:33 +01:00
|
|
|
|
2022-03-16 23:11:06 +01:00
|
|
|
# Use pkg-config to get the directories and then use these values in the
|
|
|
|
|
# FIND_PATH() and FIND_LIBRARY() calls
|
linux-capture: Add PipeWire-based capture
Add a new Linux capture based on PipeWire [1] and the Desktop portal [2].
This new capture starts by asking the Desktop portal for a screencapture session.
There are quite a few D-Bus calls involved in this, but the key points are:
1. A connection to org.freedesktop.portal.ScreenCast is estabilished, and the
available cursor modes are updated.
2. CreateSession() is called. This is the first step of the negotiation.
3. SelectSources() is called. This is when a system dialog pops up asking the
user to either select a monitor (desktop capture) or a window (window capture).
4. Start() is called. This signals the compositor that it can setup a PipeWire
stream, and start sending buffers.
The reply to this fourth call gives OBS Studio the PipeWire fd, and the id of the
PipeWire node where the buffers are being sent to. This allows creating a consumer
PipeWire stream, and receive the buffers.
Metadata cursor is always preferred, but on the lack of it, we ask the stream for
an embedded cursor (i.e. the cursor is drawn at the buffer, and OBS Studio has no
control over it.)
Window capturing is implemented as a crop operation on the buffer. Compositors
can send big buffers, and a crop rectangle, and this is used to paint a subregion
of the buffer in the scene.
The new capture is only loaded when running on EGL, since it depends on EGL to
call gs_texture_create_from_dmabuf().
[1] https://pipewire.org/
[2] https://github.com/flatpak/xdg-desktop-portal/
2021-02-25 20:57:33 +01:00
|
|
|
find_package(PkgConfig QUIET)
|
|
|
|
|
|
|
|
|
|
pkg_search_module(PKG_PIPEWIRE QUIET libpipewire-0.3)
|
|
|
|
|
pkg_search_module(PKG_SPA QUIET libspa-0.2)
|
|
|
|
|
|
|
|
|
|
set(PIPEWIRE_DEFINITIONS "${PKG_PIPEWIRE_CFLAGS}" "${PKG_SPA_CFLAGS}")
|
|
|
|
|
set(PIPEWIRE_VERSION "${PKG_PIPEWIRE_VERSION}")
|
|
|
|
|
|
2022-03-16 23:11:06 +01:00
|
|
|
find_path(
|
|
|
|
|
PIPEWIRE_INCLUDE_DIRS
|
|
|
|
|
NAMES pipewire/pipewire.h
|
|
|
|
|
HINTS ${PKG_PIPEWIRE_INCLUDE_DIRS} ${PKG_PIPEWIRE_INCLUDE_DIRS}/pipewire-0.3)
|
linux-capture: Add PipeWire-based capture
Add a new Linux capture based on PipeWire [1] and the Desktop portal [2].
This new capture starts by asking the Desktop portal for a screencapture session.
There are quite a few D-Bus calls involved in this, but the key points are:
1. A connection to org.freedesktop.portal.ScreenCast is estabilished, and the
available cursor modes are updated.
2. CreateSession() is called. This is the first step of the negotiation.
3. SelectSources() is called. This is when a system dialog pops up asking the
user to either select a monitor (desktop capture) or a window (window capture).
4. Start() is called. This signals the compositor that it can setup a PipeWire
stream, and start sending buffers.
The reply to this fourth call gives OBS Studio the PipeWire fd, and the id of the
PipeWire node where the buffers are being sent to. This allows creating a consumer
PipeWire stream, and receive the buffers.
Metadata cursor is always preferred, but on the lack of it, we ask the stream for
an embedded cursor (i.e. the cursor is drawn at the buffer, and OBS Studio has no
control over it.)
Window capturing is implemented as a crop operation on the buffer. Compositors
can send big buffers, and a crop rectangle, and this is used to paint a subregion
of the buffer in the scene.
The new capture is only loaded when running on EGL, since it depends on EGL to
call gs_texture_create_from_dmabuf().
[1] https://pipewire.org/
[2] https://github.com/flatpak/xdg-desktop-portal/
2021-02-25 20:57:33 +01:00
|
|
|
|
2022-03-16 23:11:06 +01:00
|
|
|
find_path(
|
|
|
|
|
SPA_INCLUDE_DIRS
|
|
|
|
|
NAMES spa/param/props.h
|
|
|
|
|
HINTS ${PKG_SPA_INCLUDE_DIRS} ${PKG_SPA_INCLUDE_DIRS}/spa-0.2)
|
linux-capture: Add PipeWire-based capture
Add a new Linux capture based on PipeWire [1] and the Desktop portal [2].
This new capture starts by asking the Desktop portal for a screencapture session.
There are quite a few D-Bus calls involved in this, but the key points are:
1. A connection to org.freedesktop.portal.ScreenCast is estabilished, and the
available cursor modes are updated.
2. CreateSession() is called. This is the first step of the negotiation.
3. SelectSources() is called. This is when a system dialog pops up asking the
user to either select a monitor (desktop capture) or a window (window capture).
4. Start() is called. This signals the compositor that it can setup a PipeWire
stream, and start sending buffers.
The reply to this fourth call gives OBS Studio the PipeWire fd, and the id of the
PipeWire node where the buffers are being sent to. This allows creating a consumer
PipeWire stream, and receive the buffers.
Metadata cursor is always preferred, but on the lack of it, we ask the stream for
an embedded cursor (i.e. the cursor is drawn at the buffer, and OBS Studio has no
control over it.)
Window capturing is implemented as a crop operation on the buffer. Compositors
can send big buffers, and a crop rectangle, and this is used to paint a subregion
of the buffer in the scene.
The new capture is only loaded when running on EGL, since it depends on EGL to
call gs_texture_create_from_dmabuf().
[1] https://pipewire.org/
[2] https://github.com/flatpak/xdg-desktop-portal/
2021-02-25 20:57:33 +01:00
|
|
|
|
2022-03-16 23:11:06 +01:00
|
|
|
find_library(
|
|
|
|
|
PIPEWIRE_LIBRARIES
|
|
|
|
|
NAMES pipewire-0.3
|
|
|
|
|
HINTS ${PKG_PIPEWIRE_LIBRARY_DIRS})
|
linux-capture: Add PipeWire-based capture
Add a new Linux capture based on PipeWire [1] and the Desktop portal [2].
This new capture starts by asking the Desktop portal for a screencapture session.
There are quite a few D-Bus calls involved in this, but the key points are:
1. A connection to org.freedesktop.portal.ScreenCast is estabilished, and the
available cursor modes are updated.
2. CreateSession() is called. This is the first step of the negotiation.
3. SelectSources() is called. This is when a system dialog pops up asking the
user to either select a monitor (desktop capture) or a window (window capture).
4. Start() is called. This signals the compositor that it can setup a PipeWire
stream, and start sending buffers.
The reply to this fourth call gives OBS Studio the PipeWire fd, and the id of the
PipeWire node where the buffers are being sent to. This allows creating a consumer
PipeWire stream, and receive the buffers.
Metadata cursor is always preferred, but on the lack of it, we ask the stream for
an embedded cursor (i.e. the cursor is drawn at the buffer, and OBS Studio has no
control over it.)
Window capturing is implemented as a crop operation on the buffer. Compositors
can send big buffers, and a crop rectangle, and this is used to paint a subregion
of the buffer in the scene.
The new capture is only loaded when running on EGL, since it depends on EGL to
call gs_texture_create_from_dmabuf().
[1] https://pipewire.org/
[2] https://github.com/flatpak/xdg-desktop-portal/
2021-02-25 20:57:33 +01:00
|
|
|
|
|
|
|
|
include(FindPackageHandleStandardArgs)
|
2022-03-16 23:11:06 +01:00
|
|
|
find_package_handle_standard_args(
|
|
|
|
|
PipeWire
|
|
|
|
|
FOUND_VAR PIPEWIRE_FOUND
|
|
|
|
|
REQUIRED_VARS PIPEWIRE_LIBRARIES PIPEWIRE_INCLUDE_DIRS SPA_INCLUDE_DIRS
|
|
|
|
|
VERSION_VAR PIPEWIRE_VERSION)
|
linux-capture: Add PipeWire-based capture
Add a new Linux capture based on PipeWire [1] and the Desktop portal [2].
This new capture starts by asking the Desktop portal for a screencapture session.
There are quite a few D-Bus calls involved in this, but the key points are:
1. A connection to org.freedesktop.portal.ScreenCast is estabilished, and the
available cursor modes are updated.
2. CreateSession() is called. This is the first step of the negotiation.
3. SelectSources() is called. This is when a system dialog pops up asking the
user to either select a monitor (desktop capture) or a window (window capture).
4. Start() is called. This signals the compositor that it can setup a PipeWire
stream, and start sending buffers.
The reply to this fourth call gives OBS Studio the PipeWire fd, and the id of the
PipeWire node where the buffers are being sent to. This allows creating a consumer
PipeWire stream, and receive the buffers.
Metadata cursor is always preferred, but on the lack of it, we ask the stream for
an embedded cursor (i.e. the cursor is drawn at the buffer, and OBS Studio has no
control over it.)
Window capturing is implemented as a crop operation on the buffer. Compositors
can send big buffers, and a crop rectangle, and this is used to paint a subregion
of the buffer in the scene.
The new capture is only loaded when running on EGL, since it depends on EGL to
call gs_texture_create_from_dmabuf().
[1] https://pipewire.org/
[2] https://github.com/flatpak/xdg-desktop-portal/
2021-02-25 20:57:33 +01:00
|
|
|
|
|
|
|
|
if(PIPEWIRE_FOUND AND NOT TARGET PipeWire::PipeWire)
|
2022-03-16 23:11:06 +01:00
|
|
|
add_library(PipeWire::PipeWire UNKNOWN IMPORTED)
|
|
|
|
|
set_target_properties(
|
|
|
|
|
PipeWire::PipeWire
|
|
|
|
|
PROPERTIES IMPORTED_LOCATION "${PIPEWIRE_LIBRARIES}"
|
|
|
|
|
INTERFACE_COMPILE_OPTIONS "${PIPEWIRE_DEFINITIONS}"
|
|
|
|
|
INTERFACE_INCLUDE_DIRECTORIES
|
|
|
|
|
"${PIPEWIRE_INCLUDE_DIRS};${SPA_INCLUDE_DIRS}")
|
linux-capture: Add PipeWire-based capture
Add a new Linux capture based on PipeWire [1] and the Desktop portal [2].
This new capture starts by asking the Desktop portal for a screencapture session.
There are quite a few D-Bus calls involved in this, but the key points are:
1. A connection to org.freedesktop.portal.ScreenCast is estabilished, and the
available cursor modes are updated.
2. CreateSession() is called. This is the first step of the negotiation.
3. SelectSources() is called. This is when a system dialog pops up asking the
user to either select a monitor (desktop capture) or a window (window capture).
4. Start() is called. This signals the compositor that it can setup a PipeWire
stream, and start sending buffers.
The reply to this fourth call gives OBS Studio the PipeWire fd, and the id of the
PipeWire node where the buffers are being sent to. This allows creating a consumer
PipeWire stream, and receive the buffers.
Metadata cursor is always preferred, but on the lack of it, we ask the stream for
an embedded cursor (i.e. the cursor is drawn at the buffer, and OBS Studio has no
control over it.)
Window capturing is implemented as a crop operation on the buffer. Compositors
can send big buffers, and a crop rectangle, and this is used to paint a subregion
of the buffer in the scene.
The new capture is only loaded when running on EGL, since it depends on EGL to
call gs_texture_create_from_dmabuf().
[1] https://pipewire.org/
[2] https://github.com/flatpak/xdg-desktop-portal/
2021-02-25 20:57:33 +01:00
|
|
|
endif()
|
|
|
|
|
|
|
|
|
|
mark_as_advanced(PIPEWIRE_LIBRARIES PIPEWIRE_INCLUDE_DIRS)
|
|
|
|
|
|
|
|
|
|
include(FeatureSummary)
|
2022-03-16 23:11:06 +01:00
|
|
|
set_package_properties(
|
|
|
|
|
PipeWire PROPERTIES
|
|
|
|
|
URL "https://www.pipewire.org"
|
|
|
|
|
DESCRIPTION "PipeWire - multimedia processing")
|