I when a source has both async audio/video capability, it would ignore
audio until the video has started. There's really no need to do this,
when the video starts it'll just fix up the timing automatically.
This should fix the case where things like the media source would not be
able to play audio-only files.
Core API functions changed:
-----------------------------
EXPORT bool obs_reset_audio(struct audio_output_info *aoi);
EXPORT bool obs_get_audio_info(struct audio_output_info *aoi);
To:
-----------------------------
EXPORT bool obs_reset_audio(const struct obs_audio_info *oai);
EXPORT bool obs_get_audio_info(struct obs_audio_info *oai);
Core structure added:
-----------------------------
struct obs_audio_info {
uint32_t samples_per_sec;
enum speaker_layout speakers;
uint64_t buffer_ms;
};
Non-interleaved (planar) floating point output is standard with audio
filtering, so to prevent audio filters from having to worry about
different audio format implementations and for the sake consistency
between user interfaces, make it so that audio is always set to
non-interleaved floating point output.
API changed from:
------------------------
EXPORT void obs_service_apply_encoder_settings(obs_service_t *service,
obs_encoder_t *video_encoder,
obs_encoder_t *audio_encoder);
void obs_service_info::apply_encoder_settings(void *data
obs_encoder_t *video_encoder,
obs_encoder_t *audio_encoder);
To:
------------------------
EXPORT void obs_service_apply_encoder_settings(obs_service_t *service,
obs_data_t *video_encoder_settings,
obs_data_t *audio_encoder_settings);
void obs_service_info::apply_encoder_settings(void *data
obs_data_t *video_encoder_settings,
obs_data_t *audio_encoder_settings);
These changes make it so that instead of an encoder potentially being
updated more than once with different settings, that these functions
will be called for the specific settings being used, and the settings
will be updated according to what's required by the service.
This fixes that design flaw and ensures that there's no case where
obs_encoder_update is called where the settings might not have
service-specific settings applied.
This code was originally meant to skip some checks as an optimization,
but it did not account for async video sources and would call
obs_source_default_render (which is only for synchronous video sources),
this fixes the issue by just calling obs_source_video_render.
The obs_source_get_width and obs_source_get_height functions need to
account for filters that may change their width/height such as a crop
filter or something similar.
As a side effect of this commit, because these functions need to lock
the filter mutex, these functions can no longer be used with a
const-qualified obs_source_t pointer.
This function is somewhat big and is a function called conditionally,
therefore having it be inline is somewhat of a waste if it's not always
being called.
Graphics data has to be freed inside of an active graphics context,
otherwise the resources will not be freed; in the future, we should
probably make sure that the graphics subsystem automatically
asserts/warns about this scenario.
I was iterating through the obs_source::filters array to remove filters,
but every time I removed a filter, it would remove itself from the
array, therefore it would end up skipping items in the array, therefore
leaving filters unreleased. This just removes the first filter until
all filters have been removed.
These signals introduce unnecessary complexity. Instead of emitting a
signal for a specific move direction, just signal that the scene has
been reordered, that way the target just refreshes the list.
For the show/hide and activate/deactivate callbacks, schedule these
callbacks to only be called from within the video thread rather than in
a separate thread. This ensures that any potential graphics activity
that occurs within them is kept in the same thread.
obs_source_inc_showing and obs_source_dec_showing are used to indicate
that a source is showing or no longer being shown in a particular area
of the program outside from the main render view.
One could use an obs_view, but I felt like it was unnecessary because
using an obs_view just to display a single source feels somewhat
superfluous.
The main view does not need to worry about hiding/deactivation of
sources when it's being freed here, when the obs context is shutting
down in this section of obs, all the sources are being freed, thus
there's no need to worry about deactivating/hiding sources.
When using multiple video encoders together with a single audio encoder,
the audio wouldn't be in sync.
The reason why this occurred is because the dts_usec variable of the
encoder packet (which is based on system time) would always be reset to
a value based upon the dts (which is not guaranteed to be based on
system time) in the apply_interleaved_packet_offset function. This
would then in turn cause it to miscalculate the starting audio/video
offsets, which are required to calculate sync.
So instead of calling that function unnecessarily, separate the check
for whether audio/video has been received in to a new function, and only
start applying the interleaved offsets after audio and video have
actually started up and the starting offsets have been calculated.
Instead of having services automatically apply encoder settings on
initialization (whether the output wants to or not), instead make it
something that must be explicitly called by the developer. There are
cases where the developer may not wish to apply the service-specific
settings, or may wish to override them for whatever reason.
If on windows, use the windows UTF conversion functions due to the fact
that the existing utf code is meant for 32bit wide characters, while the
windows conversion functions will properly handle 16bit wide characters.
Adds an additional search path for UI-independent and
installation-independent plugins for windows/mac.
Windows:
%appdata%/obs-plugins/
Mac:
~/Library/Application Support/obs-plugins/
Plugin directory format is [module]/bin and [module]/data.
On windows, for 32bit binaries:
[module]/bin/32bit
and 64bit binaries:
[module]/bin/64bit
Before: After:
obs_service_gettype obs_service_get_type
It seems there was an API function that was missed when we were doing
our big API consistency update. Unsquishes obs_service_gettype to
obs_service_get_type.
I didn't think it would ever need to be exported, but this function is
actually useful for applying settings to properties (to call all of
their update callbacks based upon the settings) without necessarily
having to have an object associated with it.
API changed:
--------------------------
void obs_output_set_audio_encoder(
obs_output_t *output,
obs_encoder_t *encoder);
obs_encoder_t *obs_output_get_audio_encoder(
const obs_output_t *output);
obs_encoder_t *obs_audio_encoder_create(
const char *id,
const char *name,
obs_data_t *settings);
Changed to:
--------------------------
/* 'idx' specifies the track index of the output */
void obs_output_set_audio_encoder(
obs_output_t *output,
obs_encoder_t *encoder,
size_t idx);
/* 'idx' specifies the track index of the output */
obs_encoder_t *obs_output_get_audio_encoder(
const obs_output_t *output,
size_t idx);
/* 'mixer_idx' specifies the mixer index to capture audio from */
obs_encoder_t *obs_audio_encoder_create(
const char *id,
const char *name,
obs_data_t *settings,
size_t mixer_idx);
Overview
--------------------------
This feature allows multiple audio mixers to be used at a time. This
capability was able to be added with surprisingly very little extra
overhead. Audio will not be mixed unless it's assigned to a specific
mixer, and mixers will not mix unless they have an active mix
connection.
Mostly this will be useful for being able to separate out specific audio
for recording versus streaming, but will also be useful for certain
streaming services that support multiple audio streams via RTMP.
I didn't want to use a variable amount of mixers due to the desire to
reduce heap allocations, so currently I set the limit to 4 simultaneous
mixers; this number can be increased later if needed, but honestly I
feel like it's just the right number to use.
Sources:
Sources can now specify which audio mixers their audio is mixed to; this
can be a single mixer or multiple mixers at a time. The
obs_source_set_audio_mixers function sets the audio mixer which an audio
source applies to. For example, 0xF would mean that the source applies
to all four mixers.
Audio Encoders:
Audio encoders now must specify which specific audio mixer they use when
they encode audio data.
Outputs:
Outputs that use encoders can now support multiple audio tracks at once
if they have the OBS_OUTPUT_MULTI_TRACK capability flag set. This is
mostly only useful for certain types of RTMP transmissions, though may
be useful for file formats that support multiple audio tracks as well
later on.
The comment says "these are different", but doesn't state why.
Actually, I should really rename the output flags so they're not flags,
but instead just "caps", because that's really all that they are.
obs_data_apply is used to apply the changes of a source object in to a
destination object. Problem with this however is that if sub-objects
are in use, it currently just copies the pointer of the sub-object,
meaning that the source and destination will both share the same
sub-object via reference. If anything modifies that sub-object data,
it'll modify it for both objects, which was not intended.
Instead of copying the object pointer, create a new copy and then
recursively repeat the process to ensure the data is always completely
separate.
Changed:
char *os_get_config_path(const char *name);
To:
int os_get_config_path(char *dst, size_t size, const char *name);
Also added:
char *os_get_config_path_ptr(const char *name);
I don't like this function returning an allocation by default.
Similarly to what was done with the wide character conversion functions,
this function now operates on an array argument, and if you really want
to just get a pointer for convenience, you use the *_ptr version of the
function that clearly indicates that it's returning an allocation.
The gs_enum_adapters function is an optional implementation to allow
enumeration of available graphics adapters that can be used with the
program. The ID associated with the adapter can be an index or a hash
depending on the implementation.
Direct3D textures are usually aligned to a specific pitch, so their
internal width is often not equal to the expected output width; this
means that if we want to use it on our texture output, that we must
de-align the texture while copying the texture data.
However, I unintentionally messed up the calculation at some point with
RGBA textures, so the variable size I was supposed to be using was
supposed to be multiplied by 4 (for RGBA), while I was still expecting
single channel data. So, if the texture width was something like 1332,
the source (directx) texture line size would be somewhere at or above
5328 (because it's RGBA), then destination is at 1332 (YUV luma plane),
and it would unintentionally treat 3996 (or 5328 - 1332) bytes as the
unused alignment data. So this fixes that miscalculation.
Refer to https://www.opengl.org/registry/doc/GLSLangSpec.4.10.6.clean.pdf
for a list of current (reserved) keywords.
In the future the shader compiler in libobs-opengl should probably take
care of avoiding those name conflicts (bonus points for transparently
remapping the names of effect parameters)
Instead of returning a valid string value when there are no more strings
available in the list, return NULL to indicate failure. An empty string
should really be allowed to be a valid value for the list.
The return value of os_sleepto_ns is true if it waited to the specified
time, and false if the current time is past the specified time. So it
basically returns true if it successfully waited.
I just didn't check the return value properly here, so it ended up just
setting the count of frames to 1 if overshot, ultimately causing sync
issues.
The temporary unoptimized code we were using before just completely
allocated a new copy of each frame every single time a new async frame
was output by the source plugin. This just creates a cache of frames as
needed for the current format/width/height to minimize the allocation
and deallocation. If new frames come in that are of a different
format/width/height, it'll just clear the cache. This is a fairly
important optimization.
all the async video related stuff usually started with async_*, and
there were two that didn't. So I just renamed them so they have the
same naming convention
If an async video source stops video for whatever reason, it would get
stuck on the last frame that was played. This was particularly awkward
when I wanted to give the user the ability to deactivate a source such
as a webcam because it would get stuck on the last frame.
This allows us to change the visible UI name of a property after it's
been created (particularly for a case where I want to change an
'Activate' button to 'Deactivate')
A slightly refactored version of R1CH's crash handler, allows crash
handling for windows which provides stack traces of all threads and a
list of all loaded modules. Also shows the processor, windows version,
and current libobs version.
When the encoder is set to scale to a different resolution than the obs
output resolution, make sure it uses the current video colorspace and
range by default.
I actually kind of hate how strstr returns a non-const even though it
takes a const parameter, but I can understand why they made it that way.
They really should have split it in to two functions though, one const
and one non-const or something. But alas, ultimately for a C programmer
who knows what they're doing it isn't a huge deal.
This adds support for the windows 8+ output duplicator feature which
allows the efficient capturing of a specific monitor connected to the
currently used device.
Previously, the design for the interaction between the encoder thread
and the graphics thread was that the encoder thread would signal to the
graphics thread when to start drawing each frame. The original idea
behind this was to prevent mutually cascading stalls of encoding or
graphics rendering (i.e., if rendering took too long, then encoding
would have to catch up, then rendering would have to catch up again, and
so on, cascading upon each other). The ultimate goal was to prevent
encoding from impacting graphics and vise versa.
However, eventually it was realized that there were some fundamental
flaws with this design.
1. Stray frame duplication. You could not guarantee that a frame would
render on time, so sometimes frames would unintentionally be lost if
there was any sort of minor hiccup or if the thread took too long to
be scheduled I'm guessing.
2. Frame timing in the rendering thread was less accurate. The only
place where frame timing was accurate was in the encoder thread, and
the graphics thread was at the whim of thread scheduling. On higher
end computers it was typically fine, but it was just generally not
guaranteed that a frame would be rendered when it was supposed to be
rendered.
So the solution (originally proposed by r1ch and paibox) is to instead
keep the encoding and graphics threads separate as usual, but instead of
the encoder thread controlling the graphics thread, the graphics thread
now controls the encoder thread. The encoder thread keeps a limited
cache of frames, then the graphics thread copies frames in to the cache
and increments a semaphore to schedule the encoder thread to encode that
data.
In the cache, each frame has an encode counter. If the frame cache is
full (e.g., the encoder taking too long to return frames), it will not
cache a new frame, but instead will just increment the counter on the
last frame in the cache to schedule that frame to encode again, ensuring
that frames are on time and reducing CPU usage by lowering video
complexity. If the graphics thread takes too long to render a frame,
then it will add that frame with the count value set to the total amount
of frames that were missed (actual legitimately duplicated frames).
Because the cache gives many frames of breathing room for the encoder to
encode frames, this design helps improve results especially when using
encoding presets that have higher complexity and CPU usage, minimizing
the risk of needlessly skipped or duplicated frames.
I also managed to sneak in what should be a bit of an optimization to
reduce copying of frame data, though how much of an optimization it
ultimately ends up being is debatable.
So to sum it up, this commit increases accuracy of frame timing,
completely removes stray frame duplication, gives better results for
higher complexity encoding presets, and potentially optimizes the frame
pipeline a tiny bit.
The boolean variables which stored whether frames have been
rendered/downloaded/converted/etc were not being reset when video
restarted, causing frames to not be sent in the correct order whenever
video was reset. This could lead to minor desync of video/audio.
In certain circumstances where the output was stopping, and where data
took a long enough time to send (such as when using an encoding preset
that causes high CPU usage), the output would sometimes still send data
even after it was stopped, typically causing the output to crash.
I unintentionally made it use obs_source::sample_info instead of using
the actual target channel count, which is designated by the OBS output
sampler info. obs_source::sample_info is actually used to indicate the
currently set sampler information for incoming samples. So if a source
is outputting 5.1 channel 48khz audio, and OBS is running at stereo
44.1khz, then the obs_source::sample_info value would be set to
5.1/48khz, not the other way around. It indicates what the source
itself is running at, not what OBS is running at.
I suppose the variable needs a better name because even I used it
incorrectly despite actually having been the one who wrote it.
The copy_audio_data function really shouldn't be inlined because it's
being called twice. It's somewhat unnecessary, I think I left it inline
by accident.
This changes the way source volume handles transitioning between being
active and inactive states.
The previous way that transitioning handled volume was that it set the
presentation volume of the source and all of its sub-sources to 0.0 if
the source was inactive, and 1.0 if active. Transition sources would
then also set the presentation volume for sub-sources to whatever their
transitioning volume was. However, the problem with this is that the
design didn't take in to account if the source or its sub-sources were
active anywhere else, so because of that it would break if that ever
happened, and I didn't realize that when I was designing it.
So instead, this completely overhauls the design of handling
transitioning volume. Each frame, it'll go through all sources and
check whether they're active or inactive and set the base volume
accordingly. If transitions are currently active, it will actually walk
the active source tree and check whether the source is in a
transitioning state somewhere.
- If the source is a sub-source of a transition, and it's not active
outside of the transition, then the transition will control the
volume of the source.
- If the source is a sub-source of a transition, but it's also active
outside of the transition, it'll defer to whichever is louder.
This also adds a new callback to the obs_source_info structure for
transition sources, get_transition_volume, which is called to get the
transitioning volume of a sub-source.
The reason to keep a reference counter for transitions is due to an
optimization I'm planning on when calculating transition volumes. I'm
planning on walking the source tree to be able to calculate the current
base volume of a source, but *only* if there are transitions active,
because the only time that the volume can be anything other than 1.0
or 0.0 is when there are active transitions, which may change the base
volume of a source.
When the presentation volume is set for a source, it's set for all of
its children and their children. The original intention for doing this
was to be able to use it for transitioning, but honestly it's just bad
design, and I feel there are better ways to handle transitioning volume.
Changed the design from using obs_source::enum_refs to just simply
preventing infinite source recursion in general, rather than allowing it
through the enum_refs variable. obs_source_add_child has been changed
so that it now returns a boolean, and if the function fails, it means
that the child cannot be added due to that potential recursion.
Two integers are needlessly converted to floating points for what should
be an integer operation. One of those floats is then used for another
integer operation later, where the original integer value should have
been used. So essentially there was an int -> float -> int conversion
going on, which could lead to potential loss of data due to floating
point precision.
There were also some general 64bit -> 32bit conversion warnings.
obs_encoder_getdisplayname declaration was not changed to match the
definition (obs_encoder_get_display_name) when the API consistency
update occurred.
If an encoder did not possess any SEI data, it would never send data at
all because the sent_first_packet wasn't set despite the first packet
being sent.
Added obs_avc_keyframe that returns whether an avc packet is a keyframe
or not. This function is particularly useful for when writing custom
encoder plugins.
I encountered some cases where I needed to use these enumerations
outside of the file, so this allows other modules to use AVC
enumerations without having to redefine them each time. Especially
useful for custom encoder modules.
I neglected to surround some files with extern "C", so if something
written with C++ used the files it would cause function exports to not
be mangled by it correctly.
This adds bicubic and lanczos scaling capability to libobs to improve
scaling quality and sharpness when the output resolution has to be
scaled relative to the base resolution. Bilinear is also available,
although bilinear has rather poor quality and causes scaling to appear
blurry.
If the output resolution is close to the base resolution, then bilinear
is used instead as an optimization, as there's no need to use these
shaders if scaling is not in use.
The Bicubic and Lanczos effects are also exposed via exported function
to allow the ability to use those shaders in plugin modules if desired.
The API change adds a variable 'scale_type' to the obs_video_info
structure that allows the user interface to choose what type of scaling
filter should be used.
Remove the calculation of volume levels and the corresponding signal
from obs_source since this is now handled in the volume meter.
Code that is interested in the volume levels can either use the
volmeter provided from obs_audio_controls or use the audio_data signal
to gain access to the raw audio data.
Signal updated volume levels when they become available in the volume
meter. The frequency of the updates can be adjusted by setting a
different update interval.
Remove the the signal handler for the volume_level signal of audio
sources from the volume meter in anticipation of using the levels
calculated in the volume meter itself.
Add a property to the volume meter that specifies the length of the
interval in which the audio data should be sampled before the
audio_levels signal is emitted.
This adds a new signal to (audio) sources which is emitted whenever new
audio data is received from the source. This enables other code that is
interested in the raw audio data to directly access it when it becomes
available.
This was an important change because we were originally using an
hard-coded 709/partial range color matrix for the output, which was
causing problems for people wanting to use different formats or color
spaces. This will now automatically generate the color matrix depending
on the format, color space, and range, or use an identity matrix if the
video format is RGB instead of YUV.
Just for a quick background: D3D's fmod intrinsic is very imprecise.
Naturally floating points aren't precise at all, and when the numbers
you're dealing with become very large, it can often be off by 0.1 or
more.
However, apparently 0.1 isn't enough of an offset to ensure a proper
value when using the fmod intrinsic and then flooring the value. 0.2
seems to fix the issue and make the image display properly.
On certain GPUs, if you don't flush and the window is minimized it can
endlessly accumulate memory due to what I'm assuming are driver design
flaws (though I can't know for sure). The flush seems to prevent this
from happening, at least from my tests. It would be nice if this
weren't necessary.
This replaces the old code for the audio meter that was using
calculations in two different places with the new audio meter api.
The source signal will now emit simple levels instead of dB values,
in order to avoid dB conversion and calculation in the source.
The GUI on the other hand now expects simple position values from
the volume meter api with no knowledge about dB calculus either.
That way all code that handles those conversions is in one place,
with the option to easily add new mappings that can be used
everywhere.
This adds a volume meter object to libobs that can be used by the GUI
or plugins to convert the raw audio level data from sources to values
that can easily be used to display the audio data.
The volume meter object will use the same mapping functions as the
fader object to map dB levels to a scale.
In older versions of visual studio 2013 microsoft's WORTHLESS C compiler
has a bug where it will, almost at random, not be able to handle having
variables declared in the middle of a function and give the warning:
"illegal use of this type as an expression". It was fixed in recent
VS2013 updates, but I'm not about to force everyone to update to it.
Because a vec3 structure can contain a __m128 variable and not the
expected three floats x, y, and z, you must use vec3_set when
setting a value for a vec3 structure to ensure that it uses the proper
intrinsics internally if necessary.
This adds functions for piping a command line program's stdin or stdout.
Note however that this is unidirectional only.
This will be especially useful later on when implementing MP4 output,
because MP4 output has to be piped to prevent unexpected program
termination from corrupting the file.
This adds a new library of audio control functions mainly for the use in
GUIS. For now it includes an implementation of a software fader that can
be attached to sources in order to easily control the volume.
The fader can translate between fader-position, volume in dB and
multiplier with a configurable mapping function.
Currently only a cubic mapping (mul = fader_pos ^ 3) is included, but
different mappings can easily be added.
Due to libobs saving/restoring the source volume from the multiplier,
the volume levels for existing source will stay the same, and live
changing of the mapping will work without changing the source volume.
This function greatly simplifies the use of effects by making it so you
can call this function in a simple loop. This reduces boilerplate and
makes drawing with effects much easier. The gs_effect_loop function
will now automatically handle all the functions required to do drawing.
---------------------
Before:
gs_technique_t *technique = gs_effect_get_technique("technique");
size_t passes = gs_technique_begin(technique);
for (size_t pass = 0; pass < passes; pass++) {
gs_technique_begin_pass(technique, pass);
[draw]
gs_technique_end_pass(technique);
}
gs_technique_end(technique);
---------------------
After:
while (gs_effect_loop(effect, "technique")) {
[draw]
}
If you look at the previous commits, you'll see I had added
obs_source_draw before. For custom drawn sources in particular, each
time obs_source_draw was called, it would restart the effect and its
passes for each draw call, which was not optimal. It should really use
the effect functions for that. I'll have to add a function to simplify
effect usage.
I also realized that including the color matrix parameters in
obs_source_draw made the function kind of messy to use; instead,
separating the color matrix stuff out to
obs_source_draw_set_color_matrix feels a lot more clean.
On top of that, having the ability to set the position would be nice to
have as well, rather than having to mess with the matrix stuff each
time, so I also added that for the sake of convenience.
obs_source_draw will draw a texture sprite, optionally of a specific
size and/or at a specific position, as well as optionally inverted. The
texture used will be set to the 'image' parameter of whatever effect is
currently active.
obs_source_draw_set_color_matrix will set the color matrix value if the
drawing requires color matrices. It will set the 'color_matrix',
'color_range_min', and 'color_range_max' parameters of whatever effect
is currently active.
Overall, these feel much more clean to use than the previous iteration.
This function simplifies drawing textures for sources in order to help
reduce boilerplate code. If a source is a custom drawn source, it will
automatically set up the effect to draw the sprite. If it's not a
custom drawn source, it will simply draw the sprite as per normal. If
the source uses a specific color matrix, it will also handle that as
well.
When the image data is copied into a texture with flipping set to true
each row has to be copied into the (height - row - 1)th row instead of
the row with the same number. Otherwise it will just create an unflipped
copy.
Apparently the audio isn't guaranteed to start up past the first video
frame, so it would trigger that assert (which I'm glad I put in). I
didn't originally have this happen when I was testing because my audio
buffering was not at the default value and didn't trigger it to occur.
A blunder on my part, and once again a fine example of how you should
never make assumptions about possible code path.
This moves the 'flags' variable from the obs_source_frame structure to
the obs_source structure, and allows user flags to be set for a specific
source. Having it set on the obs_source_frame structure didn't make
much sense.
OBS_SOURCE_UNBUFFERED makes it so that the source does not buffer its
async video output in order to try to play it on time. In other words,
frames are played as soon as possible after being received.
Useful when you want a source to play back as quickly as possible
(webcams, certain types of capture devices)
This reverts commit c3f4b0f018.
The obs_source_frame should not need to take flags to do this. This
shouldn't be a setting associated with the frame, but rather a setting
associated with the source itself. This was the wrong approach to
solving this particular problem.
This bug would happen if audio packets started being received before
video packets. It would erroneously cause audio packets to be
completely thrown away, and in certain cases would cause audio and video
to start way out of sync.
My original intention was "don't accept audio until video has started",
but instead mistakenly had the effect of "don't start audio until a
video packet has been received". This was originally was intended as a
way to handle outputs hooking in to active encoders and compensating
their existing timestamp information.
However, this made me realize that there was a major flaw in the design
for handling this, so I basically rewrote the entire thing.
Now, it does the following steps when inserting packets:
- Insert packets in to the interleaved packet array
- When both audio/video packets are received, prune packets up until the
point in which both audio/video start at the same time
- Resort the interleaved packet array
I have tested this code extensively and it appears to be working well,
regardless of whether or not the encoders were already active with
another output.
In video-io.c, video frames could skip, but what would happen is the
frame's timestamp would repeat for the next frame, giving the next frame
a non-monotonic timestamp, and then jump. This could mess up syncing
slightly when the frame is finally given to an outputs.
Apparently I unintentionally typed received_video = false twice instead
of one for video and one for audio.
This fixes a bug where audio would not start up again on an output that
had recently started and then stopped.
When the output sets a new audio/video encoder, it was not properly
removing itself from the previous audio/video encoders it was associated
with. It was erroneously removing itself from the encoder parameter
instead.
At the start of each render loop, it would get the timestamp, and then
it would then assign that timestamp to whatever frame was downloaded.
However, the frame that was downloaded was usually occurred a number of
frames ago, so it would assign the wrong timestamp value to that frame.
This fixes that issue by storing the timestamps in a circular buffer.
If audio timestamps are within the operating system timing threshold,
always use those values directly as a timestamp, and do not apply the
regular jump checks and timing adjustments that normally occur.
This potentially fixes an issue with plugins that use OS timestamps
directly as timestamp values for their audio samples, and bypasses the
timing conversions to system time for the audio line and uses it
directly as the timestamp value. It prevents those calculations from
potentially affecting the audio timestamp value when OS timestamps are
used.
For example, if the first set of audio samples from the audio source
came in delayed, while the subsequent samples were not delayed, those
first samples could have potentially inadvertently triggered the timing
adjustments, which would affect all subsequent audio samples.
This combines the 'direct' timestamp variance threshold with the maximum
timestamp jump threshold (or rather just removes the max timestamp jump
threshold and uses the timestamp variance threshold for both timestamp
jumps and detecting timestamps).
The reason why this was done was because a timestamp jump could occur at
a higher threshold than the threshold used for detecting OS timestamps
within a certain threshold. If timestamps got between those two
thresholds it kind of became a weird situation where timestamps could be
sort of 'stuck' back or forward in time more than intended. Better to
be consistent and use the same threshold for both values.
Add 'flags' member variable to obs_source_frame structure.
The OBS_VIDEO_UNBUFFERED flags causes the video to play back as soon as
it's received (in the next frame playback), causing it to disregard the
timestamp value for the sake of video playback (however, note that the
video timestamp is still used for audio synchronization if audio is
present on the source as well).
This is partly a convenience feature, and partly a necessity for certain
plugins (such as the linux v4l plugin) where timestamp information for
the video frames can sometimes be unreliable.
70 milliseconds is a bit too high for the default audio timestamp
smoothing threshold. The full range of error thus becomes 140
milliseconds, which is a bit more than necessary to worry about. For
the time being, I feel it may be worth it to try 50 milliseconds.
The graphics subsystem was not being freed here, for example if a
required effect failed to compile it would still successfully have the
graphics subsystem sans required effect. The graphics subsystem should
be completely shut down if required libobs effects fail to compile.
Due to a small error in the timestamp smoothing code the timestamp of
audio packages that were too early was always set to the next expected
timestamp, even if the difference was bigger than the smoothing threshold.
This would cause obs to simply append all audio data to the buffer even if
the real timestamp was way smaller than the next that was expected.
This should reduce corruption problems with for example the pulseaudio
plugin, which resends data under certain conditions.
As stated in the sysinfo manpage the totalram field in the sysinfo
structure is in mem_unit sizes since Linux 2.3.23. To get the actual
memory in the system the totalram value has to be multiplied with the
mem_unit size.
obs_source_update_properties should be called by sources when property
values change, e.g. a capture device source would use this when it
detects a new capture device (in case its properties contain a list of
available capture devices or similar)
This allows for easier comparison between two obs_data_t and it will make
const char *json1 = obs_data_get_json(data);
obs_data_t *data_ = obs_data_create_from_json(json1);
const char *json2 = obs_data_get_json(data_);
produce the same string in json1 and json2
This Fixes a minor flaw with the API where data had to always be mutable
to be usable by the API.
Functions that do not modify the fundamental underlying data of a
structure should be marked as constant, both for safety and to signify
that the parameter is input only and will not be modified by the
function using it.
Typedef pointers are unsafe. If you do:
typedef struct bla *bla_t;
then you cannot use it as a constant, such as: const bla_t, because
that constant will be to the pointer itself rather than to the
underlying data. I admit this was a fundamental mistake that must
be corrected.
All typedefs that were pointer types will now have their pointers
removed from the type itself, and the pointers will be used when they
are actually used as variables/parameters/returns instead.
This does not break ABI though, which is pretty nice.
