If the remove_connection call of obs_encoder_stop_internal took too
long, obs_encoder_destroy could get called before that function
completed, causing a race condition.
Allows the ability to encode by passing NV12 textures. This uses a
separate thread for texture-based encoders with a small queue of
textures. An output texture with a keyed mutex shared texture is locked
between OBS and each encoder. A new encoder callback and capability
flag is used to encode with textures.
This splits the "do_encode" function in to "do_encode" and
"send_off_encoder_packet", the latter of which allows the ability for
texture-based encoders to manage their own encoding and just simply send
off a packet to the outputs.
Allows the ability for one encoder to defer to another in case of
failure or unsupported feature. Okay, fine, it's mostly a hack so the
new NVENC encoder can fall back to the FFmpeg encoder if NV12 textures
aren't in use, that way it does not have to implement raw fallback
support itself. The settings and properties are pretty much the same,
so there's no reason not to utilize it in order to save time that could
otherwise be spent more productively.
Reduces GPU usage when encoding is not active. Does not perform color
conversion, frame staging, or frame downloading unless encoding is
explicitly active.
On audio encoder startup, audio encoders paired with a video encoder
would unintentionally discard a single audio data segment, causing it to
be 1024 audio frames out of sync.
(Note: This commit also modifies coreaudio-encoder, win-capture, and
win-mf modules)
This reduces logging to the user's log file. Most of the things
specified are not useful for examining log files, and make reading log
files more painful.
The things that are useful to log should be up to the front-end to
implement. The core and core plugins should have minimal mandatory
logging.
With the new audio subsystem, audio buffering is minimal at all times.
However, when the audio buffering is too small or non-existent, it would
cause the audio encoders to start with a timestamp that was actually
higher than the first video frame timestamp. Video would have some
inherent buffering/delay, but then audio could return and encode almost
immediately. This created a possible window of empty time between the
first encoded video packet and the first encoded audio packet, where as
audio buffering would cause the first audio packet's timestamp to always
be way before the first video packet's timestamp. It would then
incorrectly assume the two starting points were in sync.
So instead of assuming the audio data is always first, this patch makes
video wait for audio data comes in, and conversely buffers audio data
until video comes in, and tries to find a starting point within that
video data instead, ensuring a synced starting point whether audio
buffering is active or not.
Ensures that the packet dts_usec vals which are generated for
syncing/interleaving use the proper offset relative to where they're
supposed to be starting from. The negative DTS of a first video packet
could potentially have been applied twice due to this.
API changed from:
obs_source_info::get_name(void)
obs_output_info::get_name(void)
obs_encoder_info::get_name(void)
obs_service_info::get_name(void)
API changed to:
obs_source_info::get_name(void *type_data)
obs_output_info::get_name(void *type_data)
obs_encoder_info::get_name(void *type_data)
obs_service_info::get_name(void *type_data)
This allows the type data to be used when getting the name of the
object (useful for plugin wrappers primarily).
NOTE: Though a parameter was added, this is backward-compatible with
older plugins due to calling convention. The new parameter will simply
be ignored by older plugins, and the stack (if used) will be cleaned up
by the caller.
This prevents encoders (hardware encoders in particular) from being
continually active when all outputs disconnect from an encoder. This is
mostly just a temporary measure; the encoding interface may need a bit
of a redesign. It will also definitely needs to be able to flush at
some point. Currently when an output is stopped, the pending data is
discarded, which needs to be fixed.
Allows objects to be created regardless of whether the actual id exists
or not. This is a precaution that preserves objects/settings if for
some reason the id was removed for whatever reason (plugin removed, or
hardware encoder that disappeared). This was already added for sources,
but really needs to be added for other libobs objects as well: outputs,
encoders, services.
In case the encoder has to use a different sample rate (due to the
sample rate being unsupported), we need an API function for the encoder
to get the sample rate that the encoder is actually running at.
I realized that the get_video_info and get_audio_info encoder callbacks
always have to manually query the libobs audio/video information.
This fixes that problem by passing the libobs video/audio information in
the structures passed to those callbacks so they don't have to query it
each time, reducing needless boilerplate code for encoders.
Allows the ability to hint at encoders what format should be used.
This is particularly useful if libobs is currently operating in planar
4:4:4, but you want to force an encoder used for streaming to convert to
NV12 to prevent streaming issues.
When using multiple video encoders together with a single audio encoder,
the audio wouldn't be in sync.
The reason why this occurred is because the dts_usec variable of the
encoder packet (which is based on system time) would always be reset to
a value based upon the dts (which is not guaranteed to be based on
system time) in the apply_interleaved_packet_offset function. This
would then in turn cause it to miscalculate the starting audio/video
offsets, which are required to calculate sync.
So instead of calling that function unnecessarily, separate the check
for whether audio/video has been received in to a new function, and only
start applying the interleaved offsets after audio and video have
actually started up and the starting offsets have been calculated.
API changed:
--------------------------
void obs_output_set_audio_encoder(
obs_output_t *output,
obs_encoder_t *encoder);
obs_encoder_t *obs_output_get_audio_encoder(
const obs_output_t *output);
obs_encoder_t *obs_audio_encoder_create(
const char *id,
const char *name,
obs_data_t *settings);
Changed to:
--------------------------
/* 'idx' specifies the track index of the output */
void obs_output_set_audio_encoder(
obs_output_t *output,
obs_encoder_t *encoder,
size_t idx);
/* 'idx' specifies the track index of the output */
obs_encoder_t *obs_output_get_audio_encoder(
const obs_output_t *output,
size_t idx);
/* 'mixer_idx' specifies the mixer index to capture audio from */
obs_encoder_t *obs_audio_encoder_create(
const char *id,
const char *name,
obs_data_t *settings,
size_t mixer_idx);
Overview
--------------------------
This feature allows multiple audio mixers to be used at a time. This
capability was able to be added with surprisingly very little extra
overhead. Audio will not be mixed unless it's assigned to a specific
mixer, and mixers will not mix unless they have an active mix
connection.
Mostly this will be useful for being able to separate out specific audio
for recording versus streaming, but will also be useful for certain
streaming services that support multiple audio streams via RTMP.
I didn't want to use a variable amount of mixers due to the desire to
reduce heap allocations, so currently I set the limit to 4 simultaneous
mixers; this number can be increased later if needed, but honestly I
feel like it's just the right number to use.
Sources:
Sources can now specify which audio mixers their audio is mixed to; this
can be a single mixer or multiple mixers at a time. The
obs_source_set_audio_mixers function sets the audio mixer which an audio
source applies to. For example, 0xF would mean that the source applies
to all four mixers.
Audio Encoders:
Audio encoders now must specify which specific audio mixer they use when
they encode audio data.
Outputs:
Outputs that use encoders can now support multiple audio tracks at once
if they have the OBS_OUTPUT_MULTI_TRACK capability flag set. This is
mostly only useful for certain types of RTMP transmissions, though may
be useful for file formats that support multiple audio tracks as well
later on.
When the encoder is set to scale to a different resolution than the obs
output resolution, make sure it uses the current video colorspace and
range by default.
If an encoder did not possess any SEI data, it would never send data at
all because the sent_first_packet wasn't set despite the first packet
being sent.
This Fixes a minor flaw with the API where data had to always be mutable
to be usable by the API.
Functions that do not modify the fundamental underlying data of a
structure should be marked as constant, both for safety and to signify
that the parameter is input only and will not be modified by the
function using it.
Typedef pointers are unsafe. If you do:
typedef struct bla *bla_t;
then you cannot use it as a constant, such as: const bla_t, because
that constant will be to the pointer itself rather than to the
underlying data. I admit this was a fundamental mistake that must
be corrected.
All typedefs that were pointer types will now have their pointers
removed from the type itself, and the pointers will be used when they
are actually used as variables/parameters/returns instead.
This does not break ABI though, which is pretty nice.
API functions added:
-----------------------------------------------
obs_output_set_preferred_size
obs_output_get_width
obs_output_get_height
obs_encoder_set_scaled_size
obs_encoder_get_width
obs_encoder_get_height
These functions allow for easier means of setting a custom resolution on
an output or encoder.
If an output uses an encoder and you set the preferred width/height
using the output, then the output will attempt to set the scaled
width/height for the encoder it's currently using.
Outputs and encoders now should use these functions to determine the
width/height of the raw frame data instead of using the video-io
functions.
