OpenVPN 3 ========= OpenVPN 3 is a C++ class library that implements the functionality of an OpenVPN client, and is protocol-compatible with the OpenVPN 2.x branch. OpenVPN 3 includes a minimal client wrapper (``cli``) that links in with the library and provides basic command line functionality. OpenVPN 3 is currently used in production as the core of the OpenVPN Connect clients for iOS, Android, Linux, Windows, and Mac OS X. NOTE: As of 2017, OpenVPN 3 is primarily of interest to developers, as it does not yet replicate the full functionality of OpenVPN 2.x. In particular, server functionality is not yet implemented. .. contents:: Table of Contents OpenVPN 3 Client API -------------------- OpenVPN 3 is organized as a C++ class library, and the API is defined in ``_. A simple command-line wrapper for the API is provided in ``_. Building the OpenVPN 3 client on Linux -------------------------------------- These instructions were tested on Ubuntu 16. Get prerequisites to allow for either mbedTLS or OpenSSL linkage:: $ sudo apt-get install g++ make libmbedtls-dev libssl-dev liblz4-dev Get Asio C++ library:: $ cd ~ $ git clone https://github.com/chriskohlhoff/asio.git Set environmental variable used by OpenVPN 3 build scripts:: $ export O3=~/ovpn3 Clone the OpenVPN 3 source repo:: $ mkdir ~/ovpn3 $ cd ~/ovpn3 $ git clone https://github.com/OpenVPN/openvpn3.git core Build the OpenVPN 3 client wrapper (cli) with mbedTLS crypto/ssl library and LZ4 compression:: $ cd $O3/core/test/ovpncli $ ECHO=1 PROF=linux ASIO_DIR=~/asio MTLS_SYS=1 LZ4_SYS=1 NOSSL=1 $O3/core/scripts/build cli Or alternatively build with OpenSSL:: $ cd $O3/core/test/ovpncli $ ECHO=1 PROF=linux ASIO_DIR=~/asio OPENSSL_SYS=1 LZ4_SYS=1 $O3/core/scripts/build cli Run OpenVPN 3 client:: $ sudo ./cli -a -c yes myprofile.ovpn route-nopull Options used:: -a : use autologin sessions, if supported -c yes : negotiate LZ4 compression myprofile.ovpn : OpenVPN config file (must have .ovpn extension) route-nopull : if you are connected via ssh, prevent ssh session lockout Building the OpenVPN 3 client on Mac OS X ----------------------------------------- OpenVPN 3 should be built in a non-root Mac OS X account. Make sure that Xcode is installed with optional command-line tools. (These instructions have been tested with Xcode 5.1.1). Create the directories ``~/src`` and ``~/src/mac``:: $ mkdir -p ~/src/mac Clone the OpenVPN 3 repo:: $ cd ~/src $ mkdir ovpn3 $ cd ovpn3 $ git clone https://github.com/OpenVPN/openvpn3.git core Export the shell variable ``O3`` to point to the OpenVPN 3 top level directory:: export O3=~/src/ovpn3 Download source tarballs (``.tar.gz`` or ``.tgz``) for these dependency libraries into ``~/Downloads`` See the file ``$O3/core/deps/lib-versions`` for the expected version numbers of each dependency. If you want to use a different version of the library than listed here, you can edit this file. 1. Asio — https://github.com/chriskohlhoff/asio 2. mbed TLS (2.3.0 or higher) — https://tls.mbed.org/ 3. LZ4 — https://github.com/Cyan4973/lz4 For dependencies that are typically cloned from github vs. provided as a .tar.gz file, tools are provided to convert the github to a .tar.gz file. See "snapshot" scripts under $O3/core/deps Note that while OpenSSL is listed in lib-versions, it is not required for Mac builds. Build the dependencies:: $ OSX_ONLY=1 $O3/core/scripts/mac/build-all Now build the OpenVPN 3 client executable:: $ cd $O3/core $ . vars/vars-osx64 $ . vars/setpath $ cd test/ovpncli $ MTLS=1 LZ4=1 build cli This will build the OpenVPN 3 client library with a small client wrapper (``cli``). It will also statically link in all external dependencies (Asio, mbedTLS, and LZ4), so ``cli`` may be distributed to other Macs and will run as a standalone executable. These build scripts will create a **x86_x64** Mac OS X executable, with a minimum deployment target of 10.8.x. The Mac OS X tuntap driver is not required, as OpenVPN 3 can use the integrated utun interface if available. To view the client wrapper options:: $ ./cli -h To connect:: $ ./cli client.ovpn Testing ------- The OpenVPN 3 core includes a stress/performance test of the OpenVPN protocol implementation. The test basically creates a virtualized lossy network between two OpenVPN protocol objects, triggers TLS negotiations between them, passes control/data channel messages, and measures the ability of the OpenVPN protocol objects to perform and remain in a valid state. The OpenVPN protocol implementation that is being tested is here: ``_ The test code itself is here: ``_ Build the test:: $ cd ovpn3/core/test/ssl $ ECHO=1 PROF=linux ASIO_DIR=~/asio MTLS_SYS=1 NOSSL=1 $O3/core/scripts/build proto Run the test:: $ time ./proto *** app bytes=72777936 net_bytes=122972447 data_bytes=415892854 prog=0000216599/0000216598 D=12700/600/12700/600 N=109/109 SH=17400/15300 HE=0/0 real 0m15.813s user 0m15.800s sys 0m0.004s Developer Guide --------------- OpenVPN 3 is written in C++11 and developers who are moving from C to C++ should take some time to familiarize themselves with key C++ design patterns such as *RAII*: https://en.wikipedia.org/wiki/Resource_acquisition_is_initialization OpenVPN 3 Client Core +++++++++++++++++++++ OpenVPN 3 is designed as a class library, with an API that is essentially defined inside of namespace ``ClientAPI`` with headers and implementation in ``_ and header-only library files under ``_. The consise definition of the client API is essentially ``class OpenVPNClient`` in ``_ with several imporant extensions to the API found in: * **class TunBuilderBase** in ``_ — Provides an abstraction layer defining the *tun* interface, and is especially useful for interfacing with an OS-layer VPN API. * **class ExternalPKIBase** in ``_ — Provides a callback for external private key operations, and is useful for interfacing with an OS-layer Keychain such as the Keychain on iOS, Mac OS X, and Android, and the Crypto API on Windows. * **class LogReceiver** in ``_ — Provides an abstraction layer for the delivery of logging messages. OpenVPN 3 includes a command-line reference client (``cli``) for testing the API. See ``_. The basic approach to building an OpenVPN 3 client is to define a client class that derives from ``ClientAPI::OpenVPNClient``, then provide implementations for callbacks including event and logging notifications:: class Client : public ClientAPI::OpenVPNClient { public: virtual void event(const Event&) override { // events delivered here ... } virtual void log(const LogInfo&) override { // logging delivered here ... } ... }; To start the client, first create a ``ClientAPI::Config`` object and initialize it with the OpenVPN config file and other options:: ClientAPI::Config config; config.content = ; ... Next, create a client object and evaluate the configuration:: Client client; ClientAPI::EvalConfig eval = client.eval_config(config); if (eval.error) throw ...; Finally, in a new worker thread, start the connection:: ClientAPI::Status connect_status = client.connect(); Note that ``client.connect()`` will not return until the session has terminated. Top Layer ......... The top layer of the OpenVPN 3 client is implemented in ``_ and ``_. Most of what this code does is marshalling the configuration and dispatching the higher-level objects that implement the OpenVPN client session. Connection .......... ``class ClientConnect`` in ``_ implements the top-level connection logic for an OpenVPN client connection. It is concerned with starting, stopping, pausing, and resuming OpenVPN client connections. It deals with retrying a connection and handles the connection timeout. It also deals with connection exceptions and understands the difference between an exception that should halt any further reconnection attempts (such as ``AUTH_FAILED``), and other exceptions such as network errors that would justify a retry. Some of the methods in the class (such as ``stop``, ``pause``, and ``reconnect``) are often called by another thread that is controlling the connection, therefore thread-safe methods are provided where the thread-safe function posts a message to the actual connection thread. In an OpenVPN client connection, the following object stack would be used: 1. **class ClientConnect** in ``_ — The top-layer object in an OpenVPN client connection. 2. **class ClientProto::Session** in ``_ — The OpenVPN client protocol object that subinstantiates the transport and tun layer objects. 3. **class ProtoContext** in ``_ — The core OpenVPN protocol implementation that is common to both client and server. 4. **class ProtoStackBase** in ``_ — The bottom-layer class that implements the basic functionality of tunneling a protocol over a reliable or unreliable transport layer, but isn't specific to OpenVPN per-se. Transport Layer ............... OpenVPN 3 defines abstract base classes for Transport layer implementations in ``_. Currently, transport layer implementations are provided for: * **UDP** — ``_ * **TCP** — ``_ * **HTTP Proxy** — ``_ Tun Layer ......... OpenVPN 3 defines abstract base classes for Tun layer implementations in ``_. There are two possible approaches to define a Tun layer implementation: 1. Use a VPN API-centric model (such as for Android or iOS). These models derive from **class TunBuilderBase** in ``_ 2. Use an OS-specific model such as: * **Linux** — ``_ * **Windows** — ``_ * **Mac OS X** — ``_ Protocol Layer .............. The OpenVPN protocol is implemented in **class ProtoContext** in ``_. Options Processing .................. The parsing and query of the OpenVPN config file is implemented by ``class OptionList`` in ``_. Note that OpenVPN 3 always assumes an *inline* style of configuration, where all certs, keys, etc. are defined inline rather than through an external file reference. For config files that do use external file references, ``class ProfileMerge`` in ``_ is provided to merge those external file references into an inline form. Calling the Client API from other languages ........................................... The OpenVPN 3 client API, as defined by ``class OpenVPNClient`` in ``_, can be wrapped by the Swig_ tool to create bindings for other languages. .. _Swig: http://www.swig.org/ For example, OpenVPN Connect for Android creates a Java binding of the API using ``_. Security ++++++++ When developing security software in C++, it's very important to take advantage of the language and OpenVPN library code to insulate code from the kinds of bugs that can introduce security vulnerabilities. Here is a brief set of guidelines: * When dealing with strings, use a ``std::string`` rather than a ``char *``. * When dealing with binary data or buffers, always try to use a ``Buffer``, ``ConstBuffer``, ``BufferAllocated``, or ``BufferPtr`` object to provide managed access to the buffer, to protect against security bugs that arise when using raw buffer pointers. See ``_ for the OpenVPN ``Buffer`` classes. * When it's necessary to have a pointer to an object, use ``std::unique_ptr<>`` for non-shared objects and reference-counted smart pointers for shared objects. For shared-pointers, OpenVPN code should use the smart pointer classes defined in ``_. Please see the comments in this file for documentation. * Never use ``malloc`` or ``free``. When allocating objects, use the C++ ``new`` operator and then immediately construct a smart pointer to reference the object:: std::unique_ptr ptr = new MyObject(); ptr->method(); * When interfacing with C functions that deal with raw pointers, memory allocation, etc., consider wrapping the functionality in C++. For an example, see ``enum_dir()`` in ``_, a function that returns a list of files in a directory (Unix only) via a high-level string vector, while internally calling the low level libc methods ``opendir``, ``readdir``, and ``closedir``. Notice how ``unique_ptr_del`` is used to wrap the ``DIR`` struct in a smart pointer with a custom deletion function. * When grabbing random entropy that is to be used for cryptographic purposes (i.e. for keys, tokens, etc.), always ensure that the RNG is crypto-grade by calling ``assert_crypto()`` on the RNG. This will throw an exception if the RNG is not crypto-grade:: void set_rng(RandomAPI::Ptr rng_arg) { rng_arg->assert_crypto(); rng = std::move(rng_arg); } * Any variable whose value is not expected to change should be declared ``const``. * Don't use non-const global or static variables unless absolutely necessary. * When formatting strings, don't use ``snprintf``. Instead, use ``std::ostringstream`` or build the string using the '+' ``std::string`` operator:: std::string format_reconnecting(const int n_seconds) { return "Reconnecting in " + openvpn::to_string(n_seconds) + " seconds."; } or:: std::string format_reconnecting(const int n_seconds) { std::ostringstream os; os << "Reconnecting in " << n_seconds << " seconds."; return os.str(); } * OpenVPN 3 is a "header-only" library, therefore all free functions outside of classes should have the ``inline`` attribute. Conventions +++++++++++ * Use the **Asio** library for I/O and timers. Don't deal with sockets directly. * Never block. If you need to wait for something, use **Asio** timers or sockets. * Use the ``OPENVPN_LOG()`` macro to log stuff. Don't use ``printf``. * Don't call crypto/ssl libraries directly. Instead use the abstraction layers (``_ and ``_) that allow OpenVPN to link with different crypto/ssl libraries (such as **OpenSSL** or **mbed TLS**). * Use ``RandomAPI`` as a wrapper for random number generators (``_). * If you need to deal with configuration file options, see ``class OptionList`` in ``_. * If you need to deal with time or time durations, use the classes under ``_. * If you need to deal with IP addresses, see the comprehensive classes under ``_. * In general, if you need a general-purpose library class or function, look under ``_. Chances are good that it's already been implemented. * The OpenVPN 3 approach to errors is to count them, rather than unconditionally log them. If you need to add a new error counter, see ``_. * If you need to create a new event type which can be transmitted as a notification back to the client API user, see ``_. * Raw pointers or references can be okay when used by an object to point back to its parent (or container), if you can guarantee that the object will not outlive its parent. Backreferences to a parent object is also a common use case for weak pointers. * Use C++ exceptions for error handling and as an alternative to ``goto``. See OpenVPN's general exception classes and macros in ``_. * Use C++ destructors for automatic object cleanup, and so that thrown exceptions will not leak objects. Alternatively, use ``Cleanup`` in ``_ when you need to specify a code block to execute prior to scope exit. For example, ensure that the file ``pid_fn`` is deleted before scope exit:: auto clean = Cleanup([pid_fn]() { if (pid_fn) ::unlink(pid_fn); }); * When calling global methods (such as libc ``fork``), prepend "::" to the symbol name, e.g.:: struct dirent *e; while ((e = ::readdir(dir.get())) != nullptr) { ... } * Use ``nullptr`` instead of ``NULL``. Threading +++++++++ The OpenVPN 3 client core is designed to run in a single thread, with the UI or controller driving the OpenVPN API running in a different thread. It's almost never necessary to create additional threads within the OpenVPN 3 client core. Contributing ------------ See ``_. License ------- See ``_.