It turns out that mpv will rewrite the entire cache file on every single
quit. It's not so great since after viewing a ton of files, your cache
can grow to massive sizes and slow down quitting the player to a
noticeable amount. Turn down the max size of both caches to 10 MiB for
now as a workaround until this gets improved later.
without a developer license and the corresponding certificate we can't
sign our app bundle properly. instead use the ad-hoc pseudo identity.
there. i am not sure what restrictions we have because of that, but it's
the only way we can pseudo sign the app bundle.
Fixes#12116
Apps on Apple silicon have to be codesigned to run, but you can't
codesign bundles that have a symlink for the main executable.
The "mpv-bundle" symlink was used as the bundle's main executable
because it makes the execution name of the binary different.
Launch Services runs the CFBundleExecutable key from Info.plist when
launching a bundle, so by comparing the execution name to the name of
the symlink, you can check if that's how the binary was launched.
This replaces that detection method by moving the MPVBUNDLE
environmental variable into Info.plist. Launch Services will set
anything in LSEnvironment as environmental variables before launching
the bundle, so we're able to check for it instead of needing to
differentiate the execution name of the binary.
Fixes#12116
not all dependencies are linked with an absolute path but rather are
relatively linked via @rpath or @loader_path. in those cases we have to
resolve the paths to those dependencies ourselves and change the linking
with install_name_tool to be relative to the @executable_path of the
binary within bundle.
Fixes#11897
This filters out vastly inaccurate values from presentation feedback
that can happen shortly after restarting playback or seeking.
Makes estimated vsync converge almost instantly instead of waiting
until those outliers are dropped from the past samples.
The "Resolution" property shows the storage resolution for videos with
non-square pixels.
Currently, display aspect ratio is shown for both "Resolution" and
"Output Resolution" properties which results in a duplicate,
and is incorrect for the "Resolution" property.
The correct aspect ratio is now shown using the sar and sar-name properties.
Display aspect ratio (aspect) and pixel aspect ratio (par) are already
exported, but storage aspect ratio (sar) isn't. This value is needed to
display the storage aspect ratio for non-square pixel sources in stats.lua.
This exports two new properties: video-params/sar and video-params/sar-name.
Docmentation is updated accordingly.
In acac614032, I sort of cargoculted what
I had to do for m3u, but it's actually not needed. bstr_split_tok
unexpectedly doesn't modify the original string. So the line_dup
business in the ini parsing is not needed. Remove it. The part in
parse_ref_init isn't wrong but naming the variable "line_dup" instead of
"value" is stupid so adjust that. And finally, you can actually force a
codepage in mpv (add "+" before the codepage) which will cause every
line to be allocated memory including the header lines even though those
are obviously valid utf8 that should never need conversion. This wasn't
taken into account so add an extra pl_free_line in a couple of places to
make sure they are freed.
Adds:
--secondary-sub-visibility
--video-aspect-method
--video-unscaled
--video-pan-x
--video-pan-y
--video-rotate
--video-crop
--video-zoom
--video-scale-x
--video-scale-y
--video-align-x
--video-align-y
Those properties are related to playback state and are likely expected
to be restored when resuming playback.
Removes:
--border
--fullscreen
--ontop
--osd-level
--pause
Those options are not really content related. I don't see much gain to
save them per each watch later entry.
In commit de6d57f0 libplacebo enabled drift compensation by default.
mpv already tracks error and adjust the speed by itself.
This commit fixes judder visible when slowing video a lot, ex. playing
back at 10% speed.
Set ideal vsync duration also when dropping frames, libplacebo estimate
currently own values anyway, will be useful later...
See: de6d57f021
During move of this code from vo_gpu_next.c to video.c someone(TM) tried
to be smart and simplify the expression. The num_vsync includes error
compensation which can cause it to display +-1 vsync at the same rate.
We explicitly don't want to include this in "ideal" parameters.
Also num_vsyncs was already rounded so we produced off timings in
general.
Revert back to proper way of translating the time.
Fixes: 5e5a325
b56e63e2a9 removed -del for list options but it is still listed in the
list structs, which means that it is still tab completed on the CLI like
the other actions, and seems to behave like -set. Remove it so it is no
longer tab completed.
Also remove the description of -del from the help output of object
settings lists --(ao|vo|af|vf)-help, and update a comment.
The commit subject sounds reasonable except that frame redraws get
spammed in certain cases (still image with subtitles) all the time
regardless if the subtitle actually has changed or not. So this is
stupid and wasteful, but you'll always see subtitles. vo_gpu currently
has this behavior as well, so we're just matching it but later mpv's
core should be fixed so this works reasonably. Fixes#11335.
cd59ea8afa removed an arbitrary start
offset added to the timer. However, it turns out that demux secretly
depends on this. When updating cache to actually read bytes from the
stream, there's a diff >= MP_TIME_S_TO_NS(1) check to make it only
update once every second. With the old MP_START_TIME macro, the initial
time value would always be at least 1e10, so this would also be true.
Since we don't have that offset anymore, now the initial time is less
than that so it is not updated and properties like file-size are 0. Just
be sure to always update if the last_speed_query is 0 (i.e. we just
started the player). Fixes#12869.
Fixes gpu-next completely ignoring any speed adjustment, either DS or
playback.
Frames in pl_queue have raw PTS values, so when querying them we have to
use the same time base. There was misunderstanding between mpv and
libplacebo, where the former was querying the frames based on display
vblank timeline, but this cannot work if the playback speed is adjusted
and display timeline is not aligned with video timelien. In which case
we have to schedule "video vsync" points that we want to display.
Previous code was working only when playback speed was 1.0x, but since
DS almost always changes the speed the interpolation was mostly not
timied correctly.
Relative to frame PTS timeline as oposed to display vblank.
Those values are relative to unadjusted video timeline. They will be
used by gpu-next where it expect virtual frame vsync, not display vblank
time.
Originally suggested by @haasn. Instead of awkwardly using a pts from
the previous render loop, we can just peek into pl_queue and use the pts
of the first frame instead. This eliminates a lot of weird artifacts
that can happen on discontinuities like seeking. Fixes#12355.
Several related things in regards to interpolation. Essentially this
adds more general sanity checking to bring it more in line with what
vo_gpu does.
- Add a can_interpolate bool which determines whether or not this frame
is allowed to interpolate.
- p->is_interpolated was sometimes lying and because you can have a mix
frames greater than 1 depending on the video and settings. Make sure
that vsync_offset is not 0 so we know if it's actually interpolated or
not. This prevents a redundant redraw for those edge cases when
pausing.
- When the vo wants a reset, i.e. some sort of discontinuity, don't try
to interpolate the frame. Interpolation is only valid for
monotonically increasing times.
This fixes#11519 because of the additional check to make sure that we
have more than 1 frame. The PTS clamping part is still not great. That
is for the next commit.
String formatting of Lua crashes with widths greater then 99, so limit
the value to that.
A nicer solution would be to create our own string padding function that
can handle bigger widths, but such long suggestions aren't common enough
to be worth the effort.
In the past, this worked by accident because the initial startup was
racy and sometimes the initial firing of handle_toplevel_config would
happen after reconfig. Since we now properly wait on all compositor
events we can save the initial size hint that is given to us and try to
use that as the window-size/geometry provided the --autofit/geometry
options aren't explictly set. Fixes#11134.
the OpenGL cocoa backend was deprecated in 0.29, it has lot of bugs, is
completely unmaintained and can't properly playback anything anymore on
the newest macOS. it is time to remove it.
the old displayName property via the IODisplay API is not working
anymore on ARM based macs and was broken in at least one other case.
instead we use the new localizedName property introduced in 10.15 of the
NSScreen. we don't need any backwards compatibility since 10.15 is the
oldest version we support now.
configs and scripts that use the options and properties fs-screen-name,
screen-name or display-names need to be adjusted since the names could
differ from the previous implementation via the IODisplay API.
Fixes#9697
this is apparently something that was added with swift 5.5, though it is
hard to find anything officially.
don't capture self in closure but explicitly access all variables by
prepending self.
Fixes#12653
older macOS dev tools were inconsistent with the way how SDK versions
were returned, some truncated the minor versions. in those cases the
SDK version had to be retrieved through the SDK build version.
recently the scheme for the SDK build version changed that our heuristic
for converting it to an SDK version produced wrong version strings.
the stride of the minor version changed from 1 to 2, so SDK versions
ended up higher than they actually were. furthermore macOS 11 was
hardcoded.
since Xcode 12 Apple fixed the SDK version retrieval and it is no longer
truncated when using Xcode as dev tools. Xcode 12 is also the latest
supported version on macOS 10.15, which is also our oldest supported
version. we can remove the old SDK build version conversation and use
the Xcode only tool to retrieve the SDK version in the case Xcode is
used as dev tools. furthermore this als keeps support for Xcode 11 where
the problem wasn't fixed yet, but is still a supported version on macOS
10.15.
Fixes#9907
Having the show-progress command obey no-osd is nonsensical and
unintuitive. The show-text command already ignores no-osd, so there's
precedence for this. Fixes#5662.
Fixes a899e14b which changed clamp from 0 to 1 ms which effectivelly
introduced 1ms sleep always, even if requested until_time_ns is in the
past and should request 0 timeout.
While at it also fix mp_poll wrapper to respect negative timeout which
should mean infinite wait.
Also keep the 37d6604 behaviour for very short timeouts, but round only
the ones > 100us, anything else is 0.
Fixes: a899e14b
Most importantly, the wait_until addition was missed while doing the
unit conversions to nanoseconds which meant mpv woke up roughly every
second since not nearly enough time was added. It was meant to be 1000
seconds (1e9 in microseconds). Use a macro so it's more readable. Also
put some other wild 1e9 calculations inside of a macro as well.
Fixes a899e14bcc.
These have been build options since the waf build, but that doesn't
really make sense. The build can detect whatever macOS sdk version is
available and then use that information to determine whether to enable
the features or not. Potentially disabling multiple sdk versions doesn't
really make any sense. Because f5ca11e12b
effectively made macOS 10.15 the minimum supported version, we can drop
all of these checks and bump the required sdk version to 10.15. The rest
of the build simplifies from there.
